Read all instructions before install-
ing this kit. Failure to understand how
to properly install the kits could result
in property damage, personal injury or
even death.
Installation instructions
1. Working on one side at a time, disconnect the swivel
ear from the end of the tow bar arm by removing the shoul-
der bolt, two plastic washers and the lock nut (Figure 1).
Retain the hardware, as it will all be used in the following
steps.
2. Place the Roadmaster adapter between the ears in the
end of the tow bar. Place plastic washers on both sides of
the adapter to fill the gap (Figure 2).
3. Insert the bolt through the ear, washers and adapter
(Figure 3). Place Loctite Red ® on the threads of the
shoulder bolt and then tighen the lock nut on the bolt.
4. Repeat for the other tow bar arm.
5. Figure 4 shows the completed installation.
Figure 1
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 800-669-9690 Fax 360-735-9300 www.roadmasterinc.com
Tow bar adapter kit
part number 030
856013-01 06.19
Time Tested • Time Proven
Figure 3
Figure 2
Adapts Blue Ox motorhome-mounted tow bars
to Roadmaster direct-connect style
baseplates, or to a crossbar.
Figure 4
swivel
ear
All specifications are subject to change without notice.
-
1
Roadmaster Tow bar adapter 030 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Roadmaster Sterling All Terrain Owner's manual
-
-
-
-
-
-
-
-
-
