Steren RMX-400 Owner's manual

Steren
Brand
Steren
Model
RMX-400
Type
Owner's manual

Steren RMX-400 is an HDMI remote control extender that allows you to control your devices from a distance of up to 12 meters. It features dual-band (30 kHz - 60 kHz) carrier frequency and a maximum current of 15 mA. The extender requires an HDMI cable connection without amplifiers, couplers, or accessories for optimal performance. You can use it to control your TV, DVD player, or other HDMI-compatible devices.

Steren RMX-400 is an HDMI remote control extender that allows you to control your devices from a distance of up to 12 meters. It features dual-band (30 kHz - 60 kHz) carrier frequency and a maximum current of 15 mA. The extender requires an HDMI cable connection without amplifiers, couplers, or accessories for optimal performance. You can use it to control your TV, DVD player, or other HDMI-compatible devices.

RMX-400
V0.00817A
Extensor de control remoto por HDMI
Manual de instrucciones
PRECAUCIONES
CONEXIÓN
OUT
IN
CEC IR
IR RX
OUT
IN
CEC IR
IR RX
IR TX
Antes de utilizar su nuevo producto Steren, lea este instructivo para evitar
cualquier mal funcionamiento.
La información que se muestra en este manual sirve únicamente como referencia
sobre el producto. Debido a actualizaciones pueden existir diferencias. Por favor,
consulte nuestra página web www.steren.com.mx
para obtener la versión más reciente del instructivo.
IMPORTANTE
• No exponga el producto a temperaturas extremas.
• Siempre utilice un paño limpio y seco para limpiarlos.
• Procure que el peso del cable no recaiga en el conector, esto puede provocar
daños a su equipo. Si tiene soporte sujete el cable a este o a la pared para evitar
daños
NOTA:
Asegúrese de que el transmisor apunte directamente al equipo que desee
controlar
Es necesario que se conecte el cable HDMI sin utilizar amplificadores, coples o
accesorios HDMI para un óptimo funcionamiento.
En caso de que la distancia que desea conectar sea mayor a 20 metros utilice
extensores para que pueda funcionar correctamente.
ESPECIFICIACIONES
Frecuencia portadora: Dual Band (30 kHz – 60 kHz)
Distancia de recepción del sensor: hasta 12 m
Corriente máxima: 15 mA
Coloque ambos módulos en modo IR como se muestra en la imágen
OUT
IN
CEC IR
IR RX
OUT
IN
CEC IR
IR RX
Mode
VOL-
EQ
RPT U/SD
0
1 2 3
4
7 8
9
5
6
VOL+
SCN
Transmisor
TV
TV
Receptor
Control remoto
de DVD
DVD
Cable HDMI máx. 20 m
IR TX
OUT
IN
CEC IR
IR RX
RMX-400
V0.00817A
HDMI remote control extender
Instruction manual
CAUTIONS
CONNECTION
OUT
IN
CEC IR
IR RX
OUT
IN
CEC IR
IR RX
IR TX
Before using your new Steren product, read this instruction manual to avoid any
malfunction.
The information shown in this manual is for product reference only. Due to updates
there may be differences. Please see our website www.steren.com.mx
To obtain the most recent version of the instruction.
IMPORTANT
• Do not expose the product to extreme temperatures.
• Always wipe with a clean, dry cloth.
• Ensure that the weight of the cable does not fall on the connector, as this may
cause damage to your equipment. If supported, attach the cable to this or the wall
to prevent damage
NOTE:
Make sure the transmitter points directly to the equipment you want to control
You need to connect the HDMI cable without using amplifiers, power cords or
HDMI accessories for optimum operation.
In case the distance you want to connect is greater than 20 meters use extensors
so that it can work properly.
SPECIFICATIONS
Carrier Frequency: Dual Band (30 kHz - 60 kHz)
Sensor receiving distance: up to 12 m
Maximum current: 15 mA
Place both modules in IR mode as shown in the image
OUT
IN
CEC IR
IR RX
OUT
IN
CEC IR
IR RX
Mode
VOL-
EQ
RPT U/SD
0
1 2 3
4
7 8
9
5
6
VOL+
SCN
Transmitter
TV
TV
Receiver
Remote control
of DVD
DVD
HDMI cable max 20 m
IR TX
OUT
IN
CEC IR
IR RX
  • Page 1 1
  • Page 2 2

Steren RMX-400 Owner's manual

Steren
Brand
Steren
Model
RMX-400
Type
Owner's manual

Steren RMX-400 is an HDMI remote control extender that allows you to control your devices from a distance of up to 12 meters. It features dual-band (30 kHz - 60 kHz) carrier frequency and a maximum current of 15 mA. The extender requires an HDMI cable connection without amplifiers, couplers, or accessories for optimal performance. You can use it to control your TV, DVD player, or other HDMI-compatible devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents