Canon imagePROGRAF PRO-4100S Owner's manual

imageRUNNER ADVANCE Direct Enlargement Copy

Table of Contents

1. Overview

2. Settings for Large Format Printer (imagePROGRAF)

3. Settings for Multifunction Copier (imageRUNNER ADVANCE)

4. Enlarge Printing of Scanned Data

5. Reference for Magnification

6. If Warning Screen Appears on Web Browser

7. Trademarks and Licenses

1. Overview

Using your multifunction copier (imageRunner), you can send scanned data to a large format printer

(imagePROGRAF) to enlarge and print without using a computer.

Compatible Models

Large format printer

imagePROGRAF PRO series

Multifunction copier

imageRUNNER ADVANCE series

2. Settings for Large Format Printer (imagePROGRAF)

You need to perform settings both on the Remote UI and operation panel of the printer (imagePROGRAF).

Step 1

Enable FTP using Remote UI.

Remote UI is a software that enables you to perform operations, which are usually performed on the printer's operation

panel, using a web browser over a network.

For more on Remote UI or compatible OS/web browser, refer to printer's manual.

1. Check printer's IP address.

For details, refer to printer's manual.

2. Open web browser on your computer.

3. Enter printer's IP address to access Remote UI.

Important

If you access Remote UI for the first time, a message to warn you that the secure connection is not guaranteed

appears on the web browser. Select Continue to this website (for Internet Explorer).

For a web browser other than Internet Explorer, see If Warning Screen Appears on Web Browser.

The following screen appears.

4. If you display Remote UI for the first time, select For secure communication.

Download the root certificate, and then register it.

For details, refer to printer's manual.

Note

Once you register the root certificate to the web browser, this step is not necessary after the next time.

If the root certificate is not registered, a message to warn you that the secure connection is not guaranteed may

appear. However, the message may appear depending on a web browser even after you have registered the

root certificate.

5. Select Log in.

The screen below appears.

6. Enter printer's password.

Ask the administrator for the password.

Note

The password is set to the printer's serial number at time of purchase. Check it using the operation panel of the

printer. For details, refer to printer's manual.

7. Select OK.

8. Select System info and LAN settings on displayed screen.

9. Select LAN settings.

10. Select Other settings.

11. Select Yes.

The screen below appears.

12. Select FTP setting.

13. Select Enable.

The screen below appears.

14. Select Use authentication check box and Set/change password check box, and then enter user name and

password.

The user name and password you enter in this step are used for FTP authentication. You can use this function when

they match with those you enter on "5. Enter setting items.

" in

Step 1

under "3. Settings for Multifunction Copier

(imageRUNNER ADVANCE)".

15. Select OK.

Please wait a while. appears and returns to the startup screen.

16. Close web browser.

Step 2

Perform enlarge settings on the operation panel of the printer.

1. Select Device settings on HOME screen.

For more on the HOME screen operation, refer to printer's manual.

The Device settings screen appears.

2. Select Print settings.

3. Select Direct print settings from FTP.

4. Perform enlarge print settings on Direct print settings from FTP screen.

You can specify four print settings individually.

The print setting number you selected in this step is used when you perform settings to specify the destination for

your multifunction copier (imageRUNNER ADVANCE).

Example 1: Save settings to Print settings 1 to print at an enlarged/reduced size

1. Select Print settings 1.

2. Select Paper settings.

3. Select Enlarge/Reduce.

4. Select Scaling.

5. Select A on the displayed screen.

6. Enter the scale percentage, and then select OK.

For commonly used magnification conversions, refer to Reference for Magnification.

7. Select OK on the displayed screen.

Note

Select an image quality in Print quality settings as necessary.

You can specify the orientation of the image from Rotate.

Example 2: Save settings to Print settings 2 to print to a specific roll paper size

1. Select Print settings 2.

2. Select Paper settings.

3. Select Enlarge/Reduce.

4. Select Fit paper size.

The original is printed so that it fits on the paper size specified in Paper src.

Note

Select an image quality in Print quality settings as necessary.

You can specify the orientation of the image from Rotate.

3. Settings for Multifunction Copier (imageRUNNER ADVANCE)

Perform settings on your multifunction copier (imageRUNNER ADVANCE) to prepare for sending data to the

printer.

Step 1

Specify the destination

1. Select [Scan and Send].

2. Select [New Destination] on displayed screen.

3. Select [File] on displayed screen.

4. Select [FTP] from [Protocol] drop-down list.

5. Enter setting items.

Enter the printer's IP address as the [Host Name].

Note

We recommend you enter the fixed IP address specified for the printer.

Enter "./folderN" in [Folder Path]. ("N" represents the print setting number specified in the Direct print settings from

FTP screen on the printer.) For example, to enter the pathname for Print settings 1, enter "./folder1". For Print

settings 2, enter "./folder2".

Use the same [User Name] and [Password] that you set for FTP authentication in the Remote UI.

6. Select [OK].

Step 2

Specify the scan settings

1. Press the setting button for file format.

2. Select [PDF] or [JPEG] for [File Format].

Note

If you select [PDF], remove the check from the [Compact] and [Encrypt] check boxes.

3. Specify the settings as necessary.

Recommended resolution is 300×300dpi.

Press [Options] to select useful scan modes. You can also set combinations of scan modes.

Press or button to display the desired mode.

Step 3

Register favorite settings

1. Select [Favorite Settings].

2. Select [Register].

3. Confirming the details displayed on the screen, and then select [Next].

4. Select button to register and select [Next].

5. Select [Name] and enter a name for the button.

6. Select [Comment] and enter a comment if required.

7. Select [OK].

8. Select [Close].

Note

If you want to edit the name or comment for the registered button, select [Rename] and edit the settings as

necessary.

If you set [Show Comments] to [On], the registered comments are displayed.

4. Enlarge Printing of Scanned Data

1. Place an original on the platen glass or load it into the feeder of your multifunction copier (imageRUNNER

ADVANCE).

2. Select [Scan and Send].

3. Select [Favorite Settings].

4. Select desired Favorite Settings button.

5. Select [Yes] on displayed screen.

6. Press

(Start).

If you are placing your originals on the platen glass, press

(Start) to scan each original.

7. When scanning is complete, select [Start Sending].

Scanned originals are sent to the printer and printing starts.

5. Reference for Magnification

Scan magnification settings for PDF file formats.

ISO A format

Original size

A4 A3

Output size

A4 100% 71%

A3 141% 100%

A2 200% 141%

A1 283% 200%

A0 400% 283%

ANSI format

Original size

Letter

8.5" x 11"

Legal

8.5" x 14"

Ledger

11" x 17"

Output size

C 200% 157% 129%

D 258% 242% 200%

E 400% 314% 258%

ARCH format

Original size

A B

Output size

A 100% 66%

B 133% 100%

C 200% 133%

D 266% 200%

E 400% 266%

E1 333% 233%

Scan magnification settings for JPEG file formats.

When the original scan resolution is set to 300dpi and the printer's input resolution is set to 300dpi.

Original size

A4 A3

Output size

A4 100% 71%

A3 141% 100%

A2 200% 141%

A1 283% 200%

A0 400% 283%

When the original scan resolution is set to 300dpi and the printer's input resolution is set to 600dpi.

Original size

A4 A3

Output size

A4 200

％

141%

A3 283% 200

％

A2 400% 283%

A1 — 400%

A0 — —

When the original scan resolution is set to 600dpi and the printer's input resolution is set to 300dpi.

Original size

A4 A3

Output size

A4 50

％

35%

A3 70% 50

％

A2 100% 70%

A1 141% 100%

A0 200% 141%

Note

Refer to the printer's manual on how to check the printer's input resolution.

When scanning an original in JPEG format, the scan resolution and printer's input resolution will affect

the specified enlargement/reduction amount. When performing enlarge print it is recommended to use

the method explained in "Example 2: Save settings to Print settings 2 to print to a specific paper size".

6. If Warning Screen Appears on Web Browser

The first time you access Remote UI, a message to warn you that the secure connection is not guaranteed

appears on the web browser.

If you download and register the root certificate to the web browser, the warning message will no longer appear.

For details, refer to printer's manual. However, the message may appear depending on your web browser even

after you have registered the root certificate.

Refer to the settings below for your web browser.

For Internet Explorer:

For Google Chrome:

For Mozilla Firefox:

For Safari:

For Internet Explorer:

1. Select Continue to this website.

The Remote UI screen appears.

For Google Chrome:

1. Select Advanced.

2. Select Proceed to XXX.XXX.XXX.XXX. ("XXX.XXX.XXX.XXX" is your printer's IP address.)

The Remote UI screen appears.

For Mozilla Firefox:

1. Select Advanced.

2. Select Add Exception....

3. Select Confirm Security Exception.

The Remote UI screen appears.

For Safari:

1. Select Continue.

The Remote UI screen appears.

Trademarks and Licenses

Microsoft is a registered trademark of Microsoft Corporation.

Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other

countries.

Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other

countries.

Mac, Mac OS, macOS, OS X, AirPort, App Store, AirPrint, the AirPrint logo, Safari, Bonjour, iPad, iPad Air, iPad

mini, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Google Cloud Print, Google Chrome, Chrome OS, Chromebook, Android, Google Drive, Google Apps and

Google Analytics are either registered trademarks or trademarks of Google Inc. Google Play and Google Play

Logo are trademarks of Google LLC.

Adobe, Acrobat, Flash, Photoshop, Photoshop Elements, Lightroom, Adobe RGB and Adobe RGB (1998) are

either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other

countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc.

Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries

and/or affiliates in the USA and/or other countries.

USB Type-C™ is a trademark of USB Implementers Forum.

Note

The formal name of Windows Vista is Microsoft Windows Vista operating system.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name of Apple Inc. ("Apple") nor the names of its contributors may be used to endorse or promote

products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

Page is loading ...

Canon imagePROGRAF PRO-4100S Owner's manual

This manual is also suitable for

Canon imagePROGRAF PRO-4100S Owner's manual

Related papers

Other documents