MULTIPLEX Cup Support and Drink Staging Platform Kit Owner Instruction Manual

In accordance with our policy of continuous product development and improvement,

this information is subject to change at any time without notice.

EI213899 Issued (JRM/KAZ) 04/96

Manitowoc Beverage Equipment

2100 Future Drive  Sellersburg, IN 47172-1868

Tel: 812.246.7000, 800.367.4233  Fax: 812.246.9922

www.manitowocbeverage.com

Foodservice Group

Equipment Installation Instructions for

Cup Support, Drink Staging Platform

(Part Number 00213899)

Parts

Quantity Part Number Description

1 216577 Cup Rack punched, Drink Staging Platform

8 216578 ROD, Separator Staging Platform

Instructions

1. Use the 8 stainless steel rods to separate holding areas into 6 partitions.

2. The drawing shows the recommended spacing, which can be customized.

3. As shown in the blowup circle, the notch in rods gets hooked to a front and back slot on the selected row, by

slightly bending front and back vertical rod section.