Barco MDSC-2226 User guide

Barco
Brand
Barco
Model
MDSC-2226
Category
Keyboards
Type
User guide
MDSC-2226
User Guide
MDSC-2226 LED
MDSC-2226 DDI
MDSC-2226 MNA
(451920610996)K5903021/05
30/11/2017
Barco nv
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: +32 56.23.32.11
Fax: +32 56.26.22.62
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
PrintedinBelgium
Table of contents
TABLE OF CON TENTS
1. Welcome! .......................................................................................... 3
1.1 About the product ............................................................................................. 3
1.2 What’s in the box.............................................................................................. 3
1.3 About this user guide ......................................................................................... 4
2. Parts, controls and connectors ............................................................... 5
2.1 Front view...................................................................................................... 5
2.2 Rear view ...................................................................................................... 6
2.3 Connector view................................................................................................ 6
2.3.1 MDSC-2226 LED version............................................................................... 6
2.3.2 MDSC-2226 DDI version ............................................................................... 7
2.3.3 MDSC-2226 MNA version.............................................................................. 8
2.4 Connector pin assignments.................................................................................. 9
2.4.1 Input power connector .................................................................................. 9
2.4.2 DVI-1 connector (DVI-I)................................................................................. 9
2.4.3 DVI-2 connector (DVI-D)................................................................................10
2.4.4 DVI out connector (DVI-D) .............................................................................11
2.4.5 RS232 connector........................................................................................12
2.4.6 USB connector...........................................................................................12
2.4.7 Mini USB connector .....................................................................................13
2.4.8 DisplayPort connector ..................................................................................13
2.4.9 S-Video and S-Video-out connector...................................................................14
3. Display installation .............................................................................. 15
3.1 VESA mount installation......................................................................................15
3.2 Cover removal.................................................................................................16
3.3 Video input connection .......................................................................................16
3.3.1 MDSC-2226 LED version...............................................................................16
3.3.2 MDSC-2226 DDI version ...............................................................................17
3.3.3 MDSC-2226 MNA version..............................................................................17
3.4 Video output connection......................................................................................18
3.4.1 MDSC-2226 LED version...............................................................................18
3.4.2 MDSC-2226 DDI version ...............................................................................19
3.4.3 MDSC-2226 MNA version..............................................................................20
3.5 Nexxis OR .....................................................................................................20
3.6 Power supply connection.....................................................................................20
3.7 Cable routing ..................................................................................................21
4. Daily operation ................................................................................... 23
4.1 Keyboard activation/deactivation............................................................................23
4.2 Keyboard backlight ...........................................................................................24
4.3 On/Off switching...............................................................................................24
4.4 Power led status ..............................................................................................24
4.5 OSD menu activation .........................................................................................25
4.6 OSD menu navigation ........................................................................................25
4.7 Shortkey functions ............................................................................................26
4.7.1 Main source selection...................................................................................27
4.7.2 Multi-image configuration...............................................................................27
4.7.3 Zoom factor selection ...................................................................................27
4.7.4 Brightness adjustment ..................................................................................27
4.8 Extended keyboard functions................................................................................28
4.8.1 Main source selection...................................................................................29
4.8.2 Second source selection................................................................................29
4.8.3 Multi-image configuration...............................................................................30
4.8.4 Common Functions: Transfer function selection.....................................................30
4.8.5 Common Functions: Image size selection............................................................30
4.8.6 Common Functions: Zoom factor selection ..........................................................31
(451920610996)K5903021 MDSC-2226 30/11/2017
1
Table of contents
4.9 Menu locking/unlocking ......................................................................................31
5. Advanced operation ............................................................................. 33
5.1 OSD picture menu ............................................................................................33
5.1.1 Profile.....................................................................................................33
5.1.2 Brightness................................................................................................33
5.1.3 Contrast ..................................................................................................34
5.1.4 Saturation ................................................................................................34
5.1.5 Color temperature .......................................................................................34
5.1.6 Gamma...................................................................................................35
5.1.7 Sharpness................................................................................................35
5.2 Picture Advanced menu......................................................................................36
5.2.1 Black Level...............................................................................................36
5.2.2 Smart Video..............................................................................................36
5.2.3 Image Position...........................................................................................37
5.2.4 Auto Adjustment .........................................................................................37
5.2.5 Phase.....................................................................................................37
5.2.6 Clock/Line................................................................................................38
5.3 Display Format menu.........................................................................................38
5.3.1 Main Source (Primary Source).........................................................................38
5.3.2 Component Mode .......................................................................................39
5.3.3 Zoom......................................................................................................39
5.3.4 Image Size ...............................................................................................40
5.3.5 2
nd
Picture Mode ........................................................................................40
5.3.6 2
nd
Picture Source.......................................................................................41
5.3.7 2
nd
Picture Position......................................................................................42
5.3.8 Picture Swap.............................................................................................42
5.4 Configuration menu...........................................................................................43
5.4.1 Information ...............................................................................................43
5.4.2 Language.................................................................................................43
5.4.3 Failover mode............................................................................................44
5.4.4 Extended keyboard......................................................................................44
5.4.5 OSD setting ..............................................................................................45
5.4.5.1 OSD Horizontal Position ..........................................................................45
5.4.5.2 OSD Vertical Position .............................................................................45
5.4.5.3 OSD Time-out......................................................................................45
5.4.6 Recall Profile.............................................................................................46
5.4.7 Save Profile ..............................................................................................46
5.5 System menu..................................................................................................46
5.5.1 Power on DVI 1..........................................................................................47
5.5.2 Power on DVI 2..........................................................................................47
5.5.3 DVI Output ...............................................................................................47
5.5.4 Keyboard lock............................................................................................49
5.5.5 Keyboard backlight......................................................................................49
5.5.6 Power Saving............................................................................................49
6. Important information ........................................................................... 51
6.1 Safety information.............................................................................................51
6.2 Environmental information ...................................................................................54
6.3 Biological hazard and returns................................................................................56
6.4 Regulatory compliance information .........................................................................56
6.5 Cleaning and disinfection ....................................................................................57
6.6 Explanation of symbols.......................................................................................57
6.7 Legal disclaimer...............................................................................................59
6.8 Technical specifications ......................................................................................59
6.9 Open source license information ............................................................................64
2
(451920610996)K5903021 MDSC-2226 30/11/2017
1. Welcome!
1. WELCOME!
1.1 About t he product
Overview
Barco’s MDSC-2226 is a 26-inch surgical display. Purpose-built for the operating room, the MDSC-2226
offers an easy-clean design, smart mechanics and the most detailed images in the operating room today.
Ease of min d
Perfect hand-eye coordination: The display’s high brightness, high contrast and full HD resol
ution provide
surgeons with excellent depth perception and the most accurate images. The MDSC-2226 presents im-
ages with unrivaled color and grayscale accuracy and with near-zero latency, making it perfectly suited
for use with today’s state-of-the-art endoscopy camera systems.
Multi-source, multi-display imaging: With its broad input connectivity, the MDSC-2226 also offers flexible
multi-modality imaging (PiP & PaP) in new integrated operating rooms. Thanks to its high-bright LED
backlight, the surgical display also ensures a long lifetime and low power consumption.
Ease of installation
The MDSC-2226 comes with a smart cable management system that hides the cables for a clutter-free
set-up. Its lightweight design allows easy mounting on surgical booms and spring arms. Available in
different models, this surgical display also features a host of connectivity options and remote control.
Ease of use
Barco’s MDSC-2226 allows easy cleaning and complete disinfection thanks to its smooth surface, sealed
housing, and protective screen cover. The fanless design avoids the spread of contaminants.
Features
• 26-inch wide-screen LCD with full HD resolution and 10–bit per color
• Wide viewing angle
• High-brightness LED backlight
• Backlight Output Stabilization (BLOS)
• Advanced, full 10-bit image processing algorithms with 12–bit LUT
• Widest range of SD and HD input signals, including 3G-SDI and DisplayPort
• Light weight to easily mount onto a boom
Innovative features are also available to give maximum flexibility when installing the display as: Config-
urable DVI-out and Failover Mode
1.2 What’s in the box
Overview
Your MDSC-2226 display comes with:
• MDSC-2226 user guide
•DVIcable
• AC power cords
• external power supply
• 4 screws and Allen key
(451920610996)K5903021 MDSC-2226 30/11/2017
3
1. Welcome!
Keep your original packaging. It is designed for this display and is the ideal protection
during transport.
The us er guide is available in other languages on www.barco.com .
1.3 About this user guide
Overview
This manual provides a support to the user during the installation, set up and utilization of the MDSC-2226
display. Depending on the specific version that has been purchased, some of the features and options
described in this document may not apply to the display in user’s hands.
4
(451920610996)K5903021 MDSC-2226 30/11/2017
2. Parts, controls and connectors
2. PARTS, CONTROLS AND
CONNECTO RS
2.1 Front view
Overview
1
2
3 4 5 6 7
Image 2- 1
1
Input Selection key
2
Multi-image selection key / Down key
3
Image zoom key / Up key
4
OSD Menu key / Enter key
5
Brightness decrease / Left key
6
Brightness increase / Right key
7
Stand-by key
A 7-key capacitive keypad is located on the front of the display. By default only the stand-by key is visible.
When you touch any of the keys shortly, the front illumination of all other keys is switched on for a few
seconds. When you touch any of these other keys again while the illumination is on, the function of the
key is executed. If no further action is taken within the time-out, the front key illumination is switched off
again.
The auto-dim function of the front key illumination can be disabled in the OSD menu.
For keyboard activation please refer to "Keyboard activation/deactivation", page 23
(451920610996)K5903021 MDSC-2226 30/11/2017
5
2. Parts, controls and connectors
2.2 Rear view
Overview
4
1
5
1
1 1
3
2
Image 2- 2
1
VESA mount screw holes
2
Cable routing channel
3
Cable routing channel expansion clip
4
Connector compartment cover
5
Connector compartment cover fixation screw
2.3 Connector view
2.3.1 MDSC-2226 LED version
Overview
1 2 3 4 7 11 12 13 15
865 9 10 14
16
Image 2- 3
1
RS232
2
Input power connector
3
DVI out
4
DVI-1 (digital & analog – HDMI video support with HDCP)
5
SDI-1 out
6
SDI-1
7
DisplayPort (VESA std 1.1a)
8
Sync
9
CVBS
6
(451920610996)K5903021 MDSC-2226 30/11/2017
2. Parts, controls and connectors
10
CVBS out
11
R/Pr
12
G/Y
13
B/Pb
14
S-Video out
15
S-Video
16
Service
2.3.2 MDSC-2226 DDI version
Overview
2 3 4 5 10 14 15 16 18
1198761 12 13 17
19
Image 2- 4
1
DVI-2
2
RS232
3
Input power connector
4
DVI out
5
DVI-1 (digital & analog – HDMI video support with HDCP)
6
SDI-2 out
7
SDI-2
8
SDI-1 out
9
SDI-1
10
DisplayPort (VESA std 1.1a)
11
Sync
12
CVBS
13
CVBS out
14
R/Pr
15
G/Y
16
B/Pb
17
S-Video out
18
S-Video
19
Service
(451920610996)K5903021 MDSC-2226 30/11/2017
7
2. Parts, controls and connectors
2.3.3 MDSC-2226 MNA version
Overview
1 2 4 6
7
8 9 10 13 17 18 19 21
1412115 15 16 20
22
3
Image 2- 5
1
Optical 10Gb Ethernet SFP+ interface*
2
LED2*
Orange blinking: Activity = (Tx) or (Rx)
Off: No network activity
3
LED1*
Green: Link is active
Off: No active network connection
4
LED3*
Green: Power on, normal operation
Off: System not powered
Orange blinking: Error
5
Micro USB interface*
6
USB 2.0 type A interface*
7
RS232
8
Input power connector
9
DVI out
10
DVI-1 (digital & analog – HDMI video support with HDCP)
11
SDI-1 out**
12
SDI-1**
13
DisplayPort (VESA std 1.1a)
14
Sync
15
CVBS
16
CVBS out
17
R/Pr
18
G/Y
19
B/Pb
20
S-Video out
21
S-Video
22
Service
(*) Nexxis OR functionality: for more detailed information on Barco’ s Nexxis integrated OR solution please
refer to the dedicated user guides. Please visit m
y.barco.com to obtain these user guides.
(**) SDI is not always present in combination with Nexxis input
8
(451920610996)K5903021 MDSC-2226 30/11/2017
2. Parts, controls and connectors
2.4 Con nect or p in assignments
2.4.1 Input power connector
Overview
Image 2- 6
1. GND
2. Not connected
3. +24 VDC
4. GND
5. Shield
6. +24 VDC
The ground and the shield connections on the power input connector have no Protec-
tive Earth function. A Protective Earth connection is provided via a dedicated pin (see
image 3-10).
2.4.2 DVI-1 connector (DVI-I)
Overview
Image 2- 7
(451920610996)K5903021 MDSC-2226 30/11/2017
9
2. Parts, controls and connectors
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
4. Not connected
5. Not connected
6. SCL (for DDC)
7. SDA (for DDC)
8. Analog vertical sync
9. D1_Rx- (T.M.D.S.)
10. D1_Rx+ (T.M.D.S.)
11. GND (data 1 shield)
12. Not connected
13. Not connected
14. +5V input (DDC supply) (*)
15. GND (cable sense)
16. Hot plug detect (*)
17. D0_Rx- (T.M.D.S.)
18. D0_Rx+ (T.M.D.S.)
19. GND (data 0 shield)
20. Not connected
21. Not connected
22. GND (clock shield)
23. CK_Rx+ (T.M.D.S.)
24. CK_Rx- (T.M.D.S.)
25. C1: Analog Red
26. C2: Analog Green
27. C3: Analog Blue
28. C4: Analog horizontal sync
29. C5: Analog GND return (analog R, G, B)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
PC analog (VGA) input source can be connected to the DVI-I input conne ctor using a
DVI-I to VGA adapter. The use of an adapter cable of at least 0.15 m long will allow an
easy placement inside the cable cover.
2.4.3 DVI-2 connector (DVI-D)
Overview
Image 2- 8
10
(451920610996)K5903021 MDSC-2226 30/11/2017
2. Parts, controls and connectors
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
4. Not connected
5. Not connected
6. SCL (for DDC)
7. SDA (for DDC)
8. Not connected
9. D1_Rx- (T.M.D.S.)
10. D1_Rx+ (T.M.D.S.)
11. GND (data 1 shield)
12. Not connected
13. Not connected
14. +5V input (DDC supply) (*)
15. GND (cable sense)
16. Hot plug detect (*)
17. D0_Rx- (T.M.D.S.)
18. D0_Rx+ (T.M.D.S.)
19. GND (data 0 shield)
20. Not connected
21. Not connected
22. GND (clock shield)
23. CK_Rx+ (T.M.D.S.)
24. CK_Rx- (T.M.D.S.)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
2.4.4 DVI out connector (DVI-D)
Overview
Image 2- 9
(451920610996)K5903021 MDSC-2226 30/11/2017
11
2. Parts, controls and connectors
1. D2_Rx- (T.M.D.S.)
2. D2_Rx+ (T.M.D.S.)
3. GND (data 2 shield)
4. Not connected
5. Not connected
6. SCL (for DDC)
7. SDA (for DDC)
8. Not connected
9. D1_Rx- (T.M.D.S.)
10. D1_Rx+ (T.M.D.S.)
11. GND (data 1 shield)
12. Not connected
13. Not connected
14. +5V output (*)
15. GND (cable sense)
16. Hot plug detect
17. D0_Rx- (T.M.D.S.)
18. D0_Rx+ (T.M.D.S.)
19. GND (data 0 shield)
20. Not connected
21. Not connected
22. GND (clock shield)
23. CK_Rx+ (T.M.D.S.)
24. CK_Rx- (T.M.D.S.)
(*) +5 VDC output always available. (+5V ± 10% @ 500mA (max))
2.4.5 RS232 connector
Overview
Image 2-1 0
1. Not connected
2. Rx (driven by host)
3. Tx (driven by display)
4. Not connected
5. Ground
6. Not connected
7. Not connected
8. Not connected
9. Not connected
2.4.6 USB connector
Overview
Image 2-11
12
(451920610996)K5903021 MDSC-2226 30/11/2017
2. Parts, controls and connectors
1. +5 VDC
2. Data -
3. Data +
4. GND
2.4.7 Mini USB connector
Overview
12345
Image 2-1 2
1. +5 VDC
2. Data -
3. Data +
4. Not connected
5. GND
2.4.8 DisplayPort connector
Overview
19 17 15 13 11 9 7 5 3 1
20 18 16 14 12 10 8 6 4 2
Image 2-1 3
1. ML_Lane 0 (p)
2. GND
3. ML_Lane 0 (n)
4. ML_Lane 1 (p)
5. GND
6. ML_Lane 1 (n)
7. ML_Lane 2 (p)
8. GND
9. ML_Lane 2 (n)
10. ML_Lane 3 (p)
11. GND
12. ML_Lane 3 (n)
13. CONFIG1
14. CONFIG2
15. AUX CH (p)
16. GND
17. AUX CH (n)
18. Hot Plug
19. Return
20. DP_PWR (+3.3 VDC)
(451920610996)K5903021 MDSC-2226 30/11/2017
13
2. Parts, controls and connectors
2.4.9 S-Video and S-Video-out connector
Overview
Image 2-1 4
1. Ground (Y)
2. Ground (C)
3. Luminance (Y)
4. Chroma (C)
5. SG: Shielded Ground
14
(451920610996)K5903021 MDSC-2226 30/11/2017
3. Display installation
3. DISPLAY INSTALLATION
3.1 VESA mount installation
Overview
The display supports mounting arm & stands according to the VESA 100 mm standard.
CAUTION: Use an arm that is approved by VESA.
CAUTION: Use an arm that can support a wei ght of least 10 k g (22,05 lbs).
The monitor VESA interface has been de signed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor
(IEC60601–1).
To mount the display to an arm s tand
1. Attach the arm stand firmly to the panel using the included 4 hexagonal screws (M4 x 25 mm) and the
dented washers. Use the included Allen key to fixthescrews.
Image 3- 1
CAUTION: The4screwsincludedwiththisdisplay(M4x25mm)canbeusedforan
external VESA arm interface with a thickness of up to 5mm.
If, due to the thickness of the extern
al VESA arm interface (=V), the length of the provided
screws (=L) is not suitable, consider the following rule:
L
min
=V+20mm
L
max
=V+30mm
(451920610996)K5903021 MDSC-2226 30/11/2017
15
3. Display installation
3.2 Cover removal
To remove the connector compartment cover
1. Loosen the screw fixing the connector compartment cover.
2. Slide the cover downwards to remove it from the display.
1
2 2
Image 3- 2
3.3 Video input connection
About video input connections
The MDSC-2226 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See
the dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side
(SbS) functionality becomes available, allowing you to view two different video inputs at once. Please
refer to the dedicated chapter for more info on how to activate and use the PiP and SbS features on your
MDSC-2226.
This chapter describes how to connect the different video input types for each version of the MDSC-2226.
3.3.1 MDSC-2226 LED version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
4 5 6 7 8
1
2 3
9
Image 3- 3
DVI or VGA (*)
4
DisplayPort
5
16
(451920610996)K5903021 MDSC-2226 30/11/2017
3. Display installation
SDI
1
R/G/B/S
6
/
7
/
8
/
2
R/G/B (SOG)
6
/
7
/
8
Y/Pb/Pr
7
/
8
/
6
CVBS
3
S-Video
9
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable
cover.
3.3.2 MDSC-2226 DDI version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
6 7 8 9 10
31 4 5
11
2
Image 3- 4
DVI 1 or VGA (*)
6
DVI 2
1
DisplayPort
7
SDI 1
3
SDI 2
2
R/G/B/S
8
/
9
/
10
/
4
R/G/B (SOG)
8
/
9
/
10
Y/Pb/Pr
9
/
10
/
8
CVBS
5
S-Video
11
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable
cover.
3.3.3 MDSC-2226 MNA version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
(451920610996)K5903021 MDSC-2226 30/11/2017
17
3. Display installation
5 6 7 8 9
1 2 3
104
Image 3- 5
Nexxis
4
DVI or VGA (*)
5
DisplayPort
6
SDI (**)
1
R/G/B/S
6
/
7
/
8
/
2
R/G/B (SOG)
7
/
8
/
9
Y/Pb/Pr
8
/
9
/
7
CVBS
3
S-Video
10
(*) PC analog (VGA) input source can be connected to the DV
I-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable
cover.
(**) SDI is not always present in combination with Nexxis input
3.4 Video output connection
About video output connections
Beside the video input connections, the MDSC-2226 also has video output capabilities allowing you to
loop-through certain video inputs conn
ected with the MDSC-2226 to another display, projector, video
recorder, ...
This chapter describes how to make use of the video output connections available for each version of the
MDSC-2226.
3.4.1 MDSC-2226 LED version
To connect the video o utputs
1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro-
priate video cable(s).
18
(451920610996)K5903021 MDSC-2226 30/11/2017
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67

Barco MDSC-2226 User guide

Barco
Brand
Barco
Model
MDSC-2226
Category
Keyboards
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents