iogear GWMHDRX Quick start guide

Brand: iogear

Model: GWMHDRX

Category: Console extenders

Type: Quick start guide

iogear GWMHDRX is an expandable wireless TV connection receiver that allows you to wirelessly transmit audio and video content from a transmitter to your TV. It supports up to two transmitters and two receivers, enabling you to enjoy your favorite shows, movies, and games on multiple TVs without the hassle of running cables. With its plug-and-play design and easy-to-use interface, you can set it up in minutes and start enjoying your wireless connection right away.

Expandable Wireless TV

Connection Receiver

Quick Start Guide

GWMHDRX

PART NO. Q1558

www.iogear.com

Package Contents

System Requirements

1 x HDMI Extender Receiver

1 x 3 ft. HDMI cable

1 x IR Extender Cable

1 x 5 VDC/2A Switching Power Supply

1 x Quick Start Guide

1 x Warranty Card

• 1 HDMI display device (SDTV, HDTV, projector with HDMI port, etc.)

• IOGEAR Expandable Wireless TV Connection Kit GWMHDKIT22

or GWMRHDKIT

Overview

D. Power input

E. Data transmission indicator

F. Wireless connection indicator

G. HDMI output connector

H. IR receiver extender cable connector

I. Antenna connector

A. Input Channel indicator

B. Channel selector button

C. IR remote control window

Receiver Back

Receiver Front

Hardware Installation

Please read safety instructions carefully before installation and operation:

1. Please pay attention to all the warnings and hints for this device.

2. Do not expose this unit to rain, moisture or liquid.

3. Do not insert any foreign object into the device.

4. Opening the enclosure will void the warranty.

5. Place the device in a well ventilated area.

6. Use DC5V/2A power adapter only. Make sure the specification

matched if using 3rd party DC adapters.

Note:

1) Transmission distance will vary due to the environment.

2) Obstructions such as wall, brick or glass will shorten the signal

cover range or cause signal degradation.

3) It is recommended that the distance between each unit should

be more than 15 feet.

Connection Options

1 Transmitter 1 Receiver

1 Transmitter 2 Receivers

2 Transmitters 1 Receiver

2 Transmitters 2 Receivers

Hardware Installation

STEP 3

Connect one side of the HDMI cable to the receiver and the other

side to your HDMI display device

STEP 1

Install the antenna to the receiver

Receiver

STEP 2

Connect the IR receiver extender cable to the connector

STEP 4

Connect DC5V/2A power adapter to the Receiver power input port

Hardware Installation

STEP 1

Install the antenna to the receiver

Receiver

STEP 2

Connect the IR receiver extender cable to the connector

STEP 4

Connect DC5V/2A power adapter to the Receiver power input port

STEP 5

You can now connect to the transmitter by selecting the same

channel number as the transmitter from either of the receiver(s)

connected to your TV(s)

STEP 6

Wireless connection indicator of the transmitter and receiver will

light up when the transmitter and receiver connection is

established wirelessly

If your video source and your display is on, you should be able to

see the content of the source on your display

NOTE: When the wireless signal is transmitted through walls,

glass or other obstacles there could be signal degradation. It is

advisable to install this device in a clear environment with few or

no obstacles if possible

ReceiverTransmitter

CHANNEL CHANNEL

FAQ

Q Transmitter and receiver will not connect wirelessly

A 1. Please check if the wireless connection light is on and blinking

2. Restart both transmitter and receiver

3. Reconnect HDMI cables

Q My transmitter and receiver are not connecting

A Make sure the channel numbers are the same on the receiver to the

transmitter that you want to connect to

Q The wireless indicator is on but nothing on the display

A Please check and see if the video source is working correctly by

connecting the HDMI cable directly to the display and see if the

operation is now normal

Q Video is flickering or not stable

A 1. Change the position of the transmitter and receiver and make

sure that they are within the specified operating distance

2. Restart the transmitter and receiver

3. Reconnect the HDMI cables

4. Check for any obstacles that may block the wireless signal from

the transmitter to the receiver

Compliance Information

Limited Warranty

Contact

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential setting. This product

generates, uses, and can radiate radio frequency energy and, if not installed and used as

directed, it may cause harmful interference to radio communications. Although this

product complies with the limits for a Class B digital device, there is no guarantee that

interference will not occur in a particular installation.

CE Statement

This device has been tested and found to comply with the following European Union

directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and

R&TTED (1999/5/EC).

This product carries a 1 Year Limited Warranty. For the terms and conditions of this

warranty, please go to http://www.iogear.com/support/warranty

Important Product Information

Product Model

Serial Number

WE’RE HERE TO HELP YOU!

NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

IOGEAR

iogear.custhelp.com

support@iogear.com

www.iogear.com

iogear GWMHDRX Quick start guide

Brand: iogear

Model: GWMHDRX

Category: Console extenders

Type: Quick start guide

Download PDF

report

iogear GWMHDRX Quick start guide

iogear GWMHDRX Quick start guide

Related papers