Maxview MXL038 Operating instructions

Maxview
Brand
Maxview
Model
MXL038
Type
Operating instructions
Made in China Maxview reserves the right to change specifications without prior notice.
Card
Iss 1
Contact:
Helpline: +44 (0) 1553 811000
Email: support@maxview.co.uk
Cable Entry Box (For use with all sealants)
MXL038
Accommodates up to 3 cables (5-9mm Ø)
For use with roof mounted Satellite Systems,
Solar Panels & Air Conditioning Units
Use:
The Cable Entry Box (For use with all sealants) provides
a permanent unobtrusive external weatherproof entry
point into any mobile vehicle. Designed specifically
to use with sealant applications only.
Safety precautions:
> Installation should be carried out by a competent person
> Take care when working at heights keeping work area
clean and tidy to avoid trip hazards
> Use creeper boards where necessary to ensure roof
construction can support your weight
> Power tools should be used in accordance with
Manufacturer's instructions
> Before installation check for any hidden wires/ plumbing
> If in doubt seek professional advice or contact Maxview
Maxview shall not be liable for any damage caused due
to improper installation of this product.
Features:
Requires a suitable sealant*
High quality, durable and robust construction
1 year guarantee
www.maxview.co.uk
Installation instructions:
1. Decide on a location, mark and drill.
2. Remove any burrs and sharp edges.
3. Ensure location is flat, clean and dry.
4. Pearce membrane, insert cables and generously apply
chosen wet sealant into Seal Channel (A).
5. Fit and apply pressure to seal.
6. Screw fixing recommended. Screw through
locations (B) and secure 4 screws (Not included).
Note: Do not travel until adhesive/sealant has cured,
Note: consult manufacture of adhesive/sealant.
Key Features:
Water Ingress Protection
Features IP66 rated membrane cable seals.
3 Cable Entry Inputs
Can use 1-3 cable entry points to suit installation
requirements.
Installation Options
Designed to be installed using wet sealant only.
4 point screw fixing holes within moulding if required.
Aerodynamic Profile
Provides minimal obtrusion from vehicle roof.
Silicone Seal Channel
Designed to ensure watertight Silicone bead is achieved
during installation to vehicle roof.
Specifications:
Application: Use with all roof mounted systems.
Eg.satellite systems, solar panels and
air conditioning units
Mount Type: Roof mount
Installation: DIY or professional
Housing: UV stable injection moulded ABS plastic
Seal Type: Sealant only
Cable size: 5-9mm diameter
Tools Required:
- Surface cleaner or cloth
- *Flexible Adhesive or Silicone type Sealant
- Drill (optional)
- 2.5mm drill bit (optional)
- Phillips Screwdriver (optional)
B
A
  • Page 1 1

Maxview MXL038 Operating instructions

Maxview
Brand
Maxview
Model
MXL038
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents