Ohlins FG995 Mounting Instruction
- Category
- Motorcycle Accessories
- Type
- Mounting Instruction
Mounting instructions
FRONT FORK KAWAZAKI KX
Kit contents
Front Fork Kawazaki KX 1999
Front fork type FG 995
Spacer 8001 2x2
Fork leg 2309-80 2
Bolts for cover, M6x12 2314-01 6
Sticker Öhlins Racing AB 197-01
Sticker Memo note 1180-01
Owner´s Manual
Set-up data
Lenght 945 mm
Stroke 300 mm
Rebound adjustment 19
Compression adjustment 12
Preload 0 mm
Notes
FG 995, ISSUED
99 01 19
Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden.
Phone +46 8 590 025 00, fax +46 8 590 025 80.
Traction, handling,
comfort and safety
WARNING!
Certain modifications are necessary to
install the Öhlins front fork.It is vital that
the mounting instructions are carefully
followed.
8
Refit the removed protecting covers and
fit the Öhlins front leg covers.
NOTE!
Make sure that all bolts are tightened
in correct torque and that nothing
restraings the fron fork when the sus-
pension is beeing compressed. Check
with the motorcycles workshop
manual.
9
Continue your work with Owner´s Manual,
read about adjustments.
Before you start
WARNING!
Installing a shock absorber, that is not
approved by the motorcycle manufac-
turer, may affect the stability of yor mo-
torcycle. Öhlins Racing AB can not be
held responsible for any personal in-
jury or damage whatsoever which may
occur after fitting the shock absorber.
Öhlins Racing AB can not be held respon-
sible for any damage whatsoever to spare
parts, or injury to persons, if the instuc-
tions for servicing and maintenance are
not followed exatly. Similarly, the guaran-
tees relating to performance and reliabil-
ity will become null and void if the instruc-
tions are not adhered to.
WARNING!
Please study the mounting instructions
and the owner´s and workshop manu-
als thoroughly before handling this
shock absorber kit.
WARNING!
When installing the Öhlins shock ab-
sorber the motorcycle workshop
manual must be at hand.
NOTE!
Öhlins products are subject to con-
tinual improvement and development.
Consequently, although these instruc-
tions include the most up-to-date in-
formation avaliable at the time of print-
ing, there may be minor differences
between your suspension and this
manual. Please consult your Öhlins
dealer if you have any questions con-
cerning the manual.
Safety Signals
Important information concerning safety is
distinguished in this manual by the follow-
ing notations
The Beware sign means:
Pay attention!
Your saftey is at risk.
WARNING!
Failure to follow Warning text could
result in serious or fatal injury to
anyone working with, inspection or us-
ing the suspension, or to bystanders.
CAUTION!
Caution indicates special precautions
that must be taken to avoid damage
to the suspension.
NOTE!
This indicates information that is of im-
portance with regard to procedures
Kit contents
Before installing the shock absorber kit,
please check the contents, listed on the
frontpage of this instruction. If anything is
missing, contact your Öhlin deale
© Öhlins Racing AB.
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Öhlins Racing AB is prohibited.
Printed in Sweden.
WARNING!
1. It´s advisable to have an Öhlins
dealer or other qualified person to fit
your shock absorber.
2. Instructions in the motorcycle
workshop manual are to be followed
when removing the shock absorber.
3. When workning on the motorcycle
it must be securely supported to
prevent it from falling over.
Mounting Instructions
1
Put the bike om a stand so the front wheel
has ground clearance. Make sure it¥s
steadily positioned and will not fall over.
2
Remove the front wheel, protecting cov-
ers and the brake caliper. Let the caliper
stay fitted to the brake hose.
3
Loosen and remove the fork legs
4
Fit the Öhlins fork legs to the triple clamps.
5
Put the wheel back in position. Reassem-
ble the brake and fit the hose holder.
NOTE!
Another way to adjust the front legs is
to rotate the front wheel as fast as
possible and bring it to a fast stop by
braking. This will bring the legs in cor-
rect position
NOTE!
The clamps mustn´t be overtightendet.
There is risk to deform the fork leg
tubes. See the motorcycles Workshop
manual for correct torque.
6
Let the motorcycle stand on the ground
and compress the front suspension as
hard as possible a couple of times. This
will align the fork legs.
NOTE!
Do not tighten the front wheel axle
before the front legs are aligned. (6)
7
Tighten the wheel axle and check that all
items are tightened to correct torque. See
the bikes Workshop manual.
The front fork
legs must be
aligned before
the front wheel
axle is tightned
4
2
3
2
6
-
1
-
2
Ohlins FG995 Mounting Instruction
- Category
- Motorcycle Accessories
- Type
- Mounting Instruction
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ohlins KA912 Mounting Instruction
-
-
-
-
-
-
-
-
-