Sencor SLE 32S601TCS User manual

Category
Soundbar speakers
Type
User manual
LED TV
SLE 32S601TCS
USER’SMANUAL
EN
EN 1
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Contents
PLEASE, READ THESE INSTRUCTIONS BEFORE STARTING TO OPERATE THE
TELEVISION. STORE IT FOR LATER REFERENCE. NOTE DOWN THE MODEL NUMBER
AND THE SERIAL NUMBER OF THE TV SET. LOOK AT THE LABEL ON THE BACK
COVER AND PASS THE INFORMATION PROVIDED THERE TO YOUR DEALER IN CASE
THAT YOU WOULD NEED SERVICING.
Contents
1. Important safety instructions ..................................................................................................................2
2. Assembling the stand .............................................................................................................................. 9
3. Device ......................................................................................................................................................... 10
3.1. Buttons on the TV .................................................................................................................................... 10
3.2. Connecting the TV connectors .............................................................................................................. 10
4. Remote controller ..................................................................................................................................... 11
5. Basic controls ........................................................................................................................................... 13
5.1. First start ..................................................................................................................................................... 13
5.2. Source selection (SOURCE) ................................................................................................................... 13
5.3. Channel List ............................................................................................................................................... 13
6. Menu ........................................................................................................................................................... 14
6.1. Fast options ................................................................................................................................................14
6.2. Picture ..........................................................................................................................................................14
6.3. Sound .......................................................................................................................................................... 15
6.4. Channel ....................................................................................................................................................... 15
6.5. Smart TV .....................................................................................................................................................17
6.6. Network ....................................................................................................................................................... 18
6.7. System ........................................................................................................................................................ 19
6.8. Support.........................................................................................................................................................21
7. Media ......................................................................................................................................................... 22
7.1. USB .............................................................................................................................................................22
7.2. Media Server .............................................................................................................................................22
8. EPG ............................................................................................................................................................ 23
9. PVR ............................................................................................................................................................ 24
10. Troubleshooting ....................................................................................................................................... 25
11. Technical specifications .........................................................................................................................28
11.1. Information sheet ....................................................................................................................................30
2 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Important safety instructions
1. Important safety instructions
To be able to use this product properly, read this user'smanual carefully and keep it
for future reference. If you plan to give (sell) this device to athird person, include all
documentation, including this manual, with the transaction.
The lightning symbol
inside atriangle indicates
the device has dangerous
voltage that may cause
electric shock.
The exclamation point
symbol inside an isosceles
triangle indicates important
operation and repair
instructions in the included
device documentation.
ATTENTION
RISK OF ELECTRIC SHOCK – DO
NOT OPEN!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK SIDE).
THERE ARE NO PARTS INSIDE WHICH COULD
BE REPAIRED BY THE USER. FOR REPAIRS AND
SERVICE, CONTACT AN AUTHORIZED SERVICE
CENTRE.
General safety instructions
Please read this manual carefully before using the device. Follow this manual and
the instructions inside.
Heed all warnings.
Follow all instructions.
Use only the attachments and accessories specified by the manufacturer.
OPEN FLAMES, FOR EXAMPLE ABURNING CANDLE, SHALL NOT BE PLACED
ON THE DEVICE. DO NOT PLACE HOT OBJECTS OR OBJECTS WITH AN OPEN
FIRE ON THE DEVICE, FOR EXAMPLE CANDLES OR NIGHT LAMPS. HIGH
TEMPERATURES MAY MELT PLASTIC COMPONENTS AND CAUSE FIRE.
Use the device in temperate climate.
The manufacturer and vendor of the device are in not in any way liable for any direct
or indirect damages caused by not following the instructions for installation, setup,
operation, maintenance and cleaning of the device mentioned in this manual.
Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.
Prior to granting children consent to use the device, they shall become familiar with
the proper and safe use of the player, corresponding to their age. If the device has
aheadphone jack, do not use headphones set to maximum volume. Risk of hearing
damage or loss.
Installation, control
Install the device according to the instructions in the manual.
Leave free space around the device, it is necessary for proper air circulation. It helps
to dissipate the heat generated by the operation of the device. By covering the air
vents of the cabinet, you risk overheating and damage of the device. You must
ensure that the air circulation will not be prevented by covering the air vents with
e.g.newspaper, tablecloth, curtain, etc. Follow the installation instructions in the
manual.
EN 3
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
This device shall not be kept in aclosed area, such as alibrary or shelf, provided
sufficient ventilation cannot be provided or the manufacturer'sinstructions cannot be
followed.
Do not place any objects into the air vents or any other holes. Risk of touching
components with dangerous voltage or shorting parts that could cause fire or electric
shock. Do not pour any liquids into the device. Do not install the device in direct
sunlight, or close to heat sources, like radiators, heat exchangers, stoves or other
appliances (including amplifiers) producing heat. High temperatures shorten the life of
the electronic components of the device significantly. Do not use and do not leave the
device near an open fire.
The device must not be exposed to dripping or running water and you must not place
upon it objects filled with liquid, e.g. vases. Protect the device against becoming wet,
sprayed on or poured on by any liquid, do not leave or install the device outdoors. Do
not use the device outdoors. You risk electric shock or fire by not adhering to these
instructions.
Do not use the device close to water.
Handle the glass panels and cover of the device with care. The glass screen can
break on impact and cause serious injury.
Make sure the power cord is not stepped on or compressed, especially near the plug
and point leading from the device or adapter. The power plug (adapter) is used to
disconnect the system and must be easy to access.
Do not use adevice with adamaged power cord or plug. If the power cord or plug is
damaged, turn off the device, disconnect it from the power supply and contact your
authorized repair shop. Only aprofessional can replace adamaged power cord or
plug. Under no circumstances should you attempt to replace the power cord or plug
yourself.
Do not attempt to bypass the safety function of the polarized plug. If the plug cannot
be plugged into your socket, refer to an electrician to replace your obsolete socket.
Before plugging the device into the socket make sure the voltage in your socket
corresponds with the voltage on the label of the device or power adapter. If you are
not sure of the type of power source you have in your home, refer to your vendor or
local power company.
Before switching, make sure that all network connections are made properly and in
accordance with the manufacturer'sinstructions. Switch the device off and unplug it
from the socket before plugging in or changing the connection of the device.
Remember to always unplug the plug (adapter) from the socket before unplugging
the power cord.
Plug the power cord into an independent socket. Do not overload wall sockets using
extension cords or unified sockets. Risk of electric shock.
Hold the power cord by the plug and not by the cable when pulling out from the
socket.
4 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Important safety instructions
Disconnect the power cord from the power outlet during thunderstorms, or when not
in use for alonger period of time. Avoid carrying the device from acool environment
into awarm environment or vice versa, or operating the device in amoist
environment. Air moisture may condense in some areas within the device case and
may cause the device to become temporarily inoperable.
In this case, leave the device in awarm and well-ventilated area and leave for
1–2hours until the moisture evaporates. The device can be normally used again.
Be especially cautious when using the device for the first time during acool season
immediately after purchasing. Do not place the device on an unstable cart, stand,
console or table. The device can fall and cause serious injury to children or adults or
seriously damage the device and other objects. Only carts, stands or tables defined
by the manufacturer or sold with the device shall be used. Any assembly work with
the device shall be carried out according to the manufacturer'sinstructions and shall
use assembly accessories recommended by the manufacturer.
Do not lean against the device, do not lean over or use the device as astep. Avoid
quick movements. Make sure children do not play with the machine.
Be careful when moving the device when placed on acart. Suddenly
stopping, using excessive force and uneven surfaces may cause the cart
holding the device to tip over.
Under no circumstances are the manufacturer or vendor liable for any
direct or indirect damage caused by the failure to observe the instructions for
installation, configuration, operation, treatment and cleaning of this device included
within this manual.
Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.
Do not expose the device to extreme temperatures or humidity.
Note:
If the device is powered by an adapter, only use the AC adapter and power cord
included with the device. Do not use defective sockets. Make sure the cord is properly
plugged into the socket. If the cord is loose, an electric arc can cause fire. Refer to
aqualified electrician to replace sockets.
Note:
Plug the device into aproperly grounded sockets with protective grounding pin only.
Note:
If you plan to mount the device to awall or ceiling, follow the instructions of the
manufacturer and the user'smanual for the given system.
EN 5
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
Repairs and maintenance
To avoid risks of electric shock or fire, do not remove the device from the case – the
case does not contain components that the user could repair or adjust without the
necessary equipment and qualification. Refer to aprofessional service centre if your
device requires service.
In the event of any unusual occurrences during the use of the device, e.g. smelling
the characteristic smell of burning insulation or even seeing asmoke, turn the device
off immediately, disconnect the power supply and wait with continuing use of the
device until you learn the result of its inspection by the service personnel.
Leave all service to qualified service personnel. Service is necessary when the device
is damaged in any way, for example in case of damage to the power cord, spilling
liquid on the device, intrusion of foreign objects into the device, when the device is
exposed to rain or moisture, if the device does not function in the usual manner or if
it fell.
When repairing or replacing acomponent of the device, make sure the repair
technician used spare parts defined by the manufacturer to ensure the replaced
components have the same features as the original. Unauthorized replacements can
cause fire, electric shock or other risks.
Prior to cleaning, moving or other maintenance work, unplug the cord (adapter) from
the socket.
Clean the device with adry cloth only. Do not use gasoline, thinner or other solvents
or abrasives, scouring pads, or sponges with scouring pads to clean the device.
Note:
Do not throw the device into your common household waste. Respect laws and
regulations when disposing of the machine.
Remote controller and battery
Do not expose the remote controller or battery to direct sunlight, or close to heat
sources, like radiators, heat exchangers, stoves or other appliances (including
amplifiers) producing heat. Do not use and do not leave the device near an open fire.
Make sure the sensor is not exposed to intense light (e.g. sunlight) or fluorescent tube
light, which could lower the efficiency and reliability of the remote controller.
The remote controller or battery must not be exposed to dripping or running water
and objects filled with liquid, e.g. vases, shall not be placed on the device. Protect the
remote controller against becoming wet, sprayed or poured on by any liquid. Do not
use outdoors. Failure to respect these instructions can lead to the remote controller or
battery becoming damaged.
Do not use the device close to water.
The impact the battery disposal has on the environment shall be monitored carefully.
Using the batteries incorrectly can result in leakage and corrosion. Follow the
following instructions to ensure proper remote control operation:
Do not insert the batteries in the wrong direction.
Do not charge, heat, open or short the batteries.
6 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Important safety instructions
Do not throw batteries into afire.
Do not leave dead batteries in the remote controller.
Do not combine various types of batteries or old and new batteries.
If you do not use the remote controller for alonger period of time, remove the
batteries to prevent damaging the remote controller by the batteries leaking out.
If the remote controller does not work correctly or its range decreases, replace all
batteries with new ones.
If there is an electrolyte leakage from the batteries, have the remote control
serviced by an authorized technician.
NOTICE:
To prevent risk of fire or electric shock, do not expose the device to rain or
moisture.
NOTICE:
The batteries must not be exposed to excessive heat, for example sunlight, fire,
etc.
This symbol indicates the device has double insulation between dangerous
voltage from the network and user-accessible parts. Replace parts with identical
spare parts only.
EN 7
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
Do not leave astatic image on the LCD panel for
more than 2 hours. This may result in adamaged
panel.
This is typical for liquid crystal displays and
does not indicate any problems. LCD screens are
made using precision technology to provide even
the finest image details. Several defective pixels
can appear on the screen from time to time, indicated as red, blue, green or black
dots (up to 0.001% of the total pixel count of the screen). This does not affect the
characteristics and the effectiveness of your TV set.
Notes on the USB connector:
USB memory devices require being connected directly into the device. To prevent
afailing or interrupting data transfer, do not use USB extension cable. Electrostatic
discharge can cause the device to not function. In this case, the user must restart the
device.
Before using aUSB memory device, test that it communicates with the device and
its read and write speed.
For maximum reading speed, we recommend to keep the disc space defragmented.
Use file system FAT32, single partition, no protection.
If the reading/writing of the memory device is not smooth, it can lead to undesirable
effects, such as interruption of the image (blocky image) or failure of whole frames,
audio malfunctions, and in extreme cases, stopping of the operation. Unexpected
behaviour of the connected storage device, or the presence of viruses and other
malicious software can cause the device to stop the functioning with the need to
restart it.
The USB connector is astandard type and cannot power aUSB device with ahigh
power consumption (e.g. hard drives). Use adevice with its own power and power
them with their own power supply.
The device was designed with respect to maximum compatibility with memory
devices. Considering the variety of devices on the market, we cannot guarantee
compatibility with every USB device available. Should you run into any issues, try
formatting the memory device directly in the device. Should problems persist, use
another memory device.
Due to wide range of the USB devices on the market, it is not possible to ensure
compatibility of the device with all types of USB devices.
8 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Important safety instructions
Serial number
The device'sserial number is aunique number that unambiguously identifies your device.
Mark down the serial number of your device below along with additional information
important for the unambiguous identification of your device.
Serial number:
_____________________________________________________
Date of purchase: ___________________________________________________
Notes:
1. The graphics in this manual is informative.
2. The menu on your TV screen may be slightly different from the illustrations in this
manual.
3. The information in the document are subject to change without notice. The
manufacturer accepts no liability for damages incurred directly or indirectly from
errors, incompleteness or discrepancies between the instruction manual and the
product described.
EN 9
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Assembling the stand
2. Assembling the stand
Before attaching /removing the stand, make sure the TV is turned off and plug is
disconnected from the wall outlet.
Before performing the work, put underneath the LED TV set some soft material
(e.g.blanket). This will prevent damage to it. Ensure aproper attachment of the supports
so that the TV set is stable.
Place the assembled TV set on afirm and flat surface.
Instruction for assembling the stand
10 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Device
3. Device
3.1. Buttons on the TV
Note:
The location and names of the function buttons and power button on the TV may vary
according to TV model.
button
Turns the TV on or standby.
1. Turn on the TV.
2. The TV is on, press it to display Button menu.
3. In the Button menu, short press it to select the menu, long press (more than
4 sec, less than 6 sec) it to confirm the selection.
4. Press longer than 6 sec does Power Off of TV
3.2. Connecting the TV connectors
1. RJ45: connect the internet
2. S/PDIF: connect the coaxial output
3./4. RF IN: connection to the antenna or cable television system
5. EARPHONE OUT: earphone output
6. HDMI1: connection of device with aHDMI output to the HDMI1
connector
7. USB: connection of aUSB flash unit for playing supported
multimedia content
8. HDMI2: connection of device with aHDMI output to the HDMI2
connector
9. Cl: Cl input
10. AV IN: AV input
1
2
3
4
5
6
7
8
9
0
EN 11
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Remote controller
4. Remote controller
: Turns the TV on/off the standby mode.
: Press to mute the sound. To resume press
it again or press VOL +.
Number pad 0-9: Press button 0-9 directly to
select aTV channel when watching television.
Select the page number in the teletext mode,
etc.
FAV: In the TV mode you enter the Favourites
menu or you exit it.
: Enter YouTube
VOL+/-: Press to increase or lower the volume.
CH
/ : Press to switch to individual channels.
TV: Direct input selection of digital TV.
SOURCE: Press to select the required input.
USB: Press to enter the media playback mode.
: Displays the TV’smain menu in the TV
mode.
: Display of information button.
EPG: Press to display/hide the electronic
program guide.
: Displays the options menu of selected
functions (OPTIONS).
: TV home page, selection of inputs and
applications.
v/V/b/B/OK: Used for navigation in the
menu on the screen and set the TV set
according to your preferences.
: Return one step back.
EXIT: Function to exit menu or the screen.
NETFLIX: Enter the NETFLIX page.
Colour buttons: Match various functions in the
menu or in the teletext.
TEXT: Turn teletext on or off.
Note: the teletext function is optional and
the availability of buttons depends on the
model. Teletext information depends fully
on the channel provider.
LANG:
Selection of the accompanying audio, if
available.
Sound mode selection.
Left/Right channel selection
12 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Remote controller
SUBTITLE: Button to display/hide subtitles on the bottom part of the screen if available.
CH LIST: View the list of programs according to the set options.
SLEEP: Set time to automatically turn off the TV set.
ASPECT: Press to change the display size.
PRE-CH: Button to switch to the previously watched channel.
ECO: Power saving mode selection.
m: Fast rewinding.
M: Fast forwarding.
?b: Jump to previous track.
B?: Skip to next track.
: Press to record (only in the DTV mode).
B / X: Play/Pause or start recording with time shift in media mode.
x: Stop recording/play.
Note:
Remove the battery during storage or if you do not use the device for along time.
To control your device with aremote controller, point it at the device and then press
the desired function. The maximum range of the remote control is about 5 meters with
adeviation of up to +/- 30 degrees from the perpendicular direction to the receiving
remote sensor on the front of the device. The falling battery capacity decreases
gradually the range of the remote controller. When you use the remote controller,
there can not be any fixed obstacles between the remote controller and the device.
During astandard use, the battery life in the remote controller is about 1 year. If there
is asignificant reduction in the effective range of the remote controller, replace both
batteries in the controller. If you are not going to use the controller for along time, take
out both batteries – thus preventing apossible damage from battery leakage.
Prevent entry of strong light (e.g. sunlight or strong light from fluorescent or energy-
saving sources) that may limit the efficiency and reliability of infrared remote controller.
EN 13
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Basic controls
5. Basic controls
5.1. First start
Guide
The first time you turn on the TV, the guide helps you with the setup.
With the guide, select the appropriate menu language, country, Internet connection, home
use (recommended) or demo mode and source selection. When you finish the guide and
select abroadcast source, you need to search the source for the available channels.
Note:
You can start the setup guide later in MENU/System/Initial setup/Installation guide.
5.2. Source selection (SOURCE)
Press SOURCE, find the required source by using v/Vand press OK to select it.
Other selections
Selection NETFLIX/YouTube offers an access to installed apps. To use the YouTube
service it is advisable to log in, to use the NETFLIX service it is necessary to log in. You
can find the terms of use, account management and prices at the websites of these
services.
5.3. Channel List
Press OK to view the list of channels, which you previously saved. Move within the list
using the / buttons and press OK to select anew channel. Other important options
are available in the program list:
Red button – program list selection. Extensive lists (option All) can be limited to e.g. TV
programs (Digital, DTV), Radio, Free Favourites programs.
Note:
The last used list is always displayed when you press OK until you change it using the
red button. Likewise, the FAV button on the remote control can be used as ashortcut
to quickly restrict the list to favourite programs only. If you have not selected any
favourite programs and you have selected the Favourites list that is empty, change the
list display to e.g. All using the red button.
Green button – fast saving of the highlighted program to the list of Favourites (FAV) or
removal from this list. Status shows the heart symbol
Yellow button – active tuner selection, terrestrial Antenna, Cable, Satellite antenna.
14 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Menu
6. Menu
Moving and selection in the Menu
Press MENU and select the item you want to work with using the buttons v/V. Then
press OK.
Move within the item using the buttons v/Vand confirm by pressing OK.
To go back to previous item press the button b.
To end the setup press the button MENU.
Note:
Depending on the current broadcast situation, on the connected devices and on the
selected source, some options may be inactive or not appearing at all.
6.1. Fast options
After pressing the Option button, some useful options are available (may vary, depending
on the software used):
WiFi display (WiFi display) – wireless display when connected to amobile device.
Music (Enjoy music) – turning off the screen for just listening to the audio
Sleep (Sleep timer) – TV sleep timer
World clock – displaying time in several time zones
Soundbar Ready – adjusting sound for richer delivery via soundbar
Sports mode – sports picture and sound mode for better experience
6.2. Picture
Select settings according to your taste, source, scene, ambient conditions.
Picture Mode
Select from available settings 16:9/4:3/Cinerama/16:9Zoom/16:9Zoom up/14:9 Zoom.
Personal mode allows to set customized values for Brightness/Contrast/Colour/Tint/
Sharpness/Backlight.
Auto formatOn/Off and Screen mode
Select between 16:9/4:3/Stretch Zoom/Wide Zoom/Zoom2/Wide Zoom 2.
If the selected aspect ratio differs from that originally recorded in the image, it will distort
the ratios of objects, such as faces. The correct Auto mode function depends on the
correct information provided by the author.
Colour Temp – select Normal, Cool or Warm colour presentation.
Dynamic Contrast – advanced evaluation of the displayed scene and adjustment of
contrast.
Noise Reduction – select noise limit in the picture between Off/Low/Medium/High.
EN 15
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.3. Sound
Choose according to your taste, sources, played sound, or ambient conditions of
aparticular setting.
Sound mode
Select from available modes: Music/Movie/Voice/Standard/Stadium/Personal
SPDIF Type – you can switch between linear PCM or Auto output when your connected
device has adecoder for the accompanying soundtrack.
SPDIF Delay – set in case of broken synchronization in SPDIF.
Audio Delay – fine tuning of audio and picture time synchronization.
AVL
Select On or Off – electronic equalization of different volume according to the program.
TV placement – select between Table and Wall.
Advanced Settings
Equaliser – adjusting the sound in several frequency bands. Only for user audio mode.
Audio Description – When asound track with an audio description is broadcast in the
currently running program, you can turn it on or off to add it to normal sound.
AD Volume – when audio description is enabled, the volume of the description can be
adjusted against the normal sound.
6.4. Channel
This selection is used to set up the received channels, to scan the broadcasting bands,
and to save broadcast programs. Depending on the type of broadcast (air, cable, or
satellite), the content of the selection varies.
To receive broadcasts, you need to set each broadcast mode you want separately and
save its programs. Before setting each method it is important to select the correct source
SOURCE (DTV for digital DVB-T, ATV for analogue broadcasting). Select in the list of
programs using yellow button the required type of tuner: terrestrial antenna, cable,
satellite.
Tip:
We recommend checking the antenna and its quality, including the quality of the
power cable before starting the tuning. This is especially true for satellite dishes, where
we recommend that they be installed and inspected by an expert, e.a. for safety
reasons.
Note:
Find out the type and parameters of your antenna installation, what signals are present
in your subscriber drawer before setup and tuning.
16 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Menu
6.4.1. Channel Scan
Make sure that you selected the DTV source. Next, select the country to set the reception
systems.
Country select from the available countries the one which best suits your location.
Tuner Mode – select terrestrial (Antenna) or cable (Cable) or satellite (Satellite) according
to your reception.
Antenna/Cable
Automatic Search – select if should be tuned digital DTV, analogue ATV or both. OK
– starts searching the whole bandwidth and informs you of the found channels and
programs.
Other selections are applicable only for cable reception:
Modulation – select Auto or Type QAM according to the operator information.
Frequency – select Auto or Manual according to the operator information.
Symbol rate – select Auto or Manual entry according to the operator information.
Manual, Analogue, Digital
Use buttons / Channel intended to search for aprogram. The demodulation stripe
indicator will let you know about the presence of abroadcast on this channel and how
to find programs on it. Press to go to Search and press OK. The found programs are
saved in your list, or the new search will overwrite those already present in your list.
Satellite reception (DVB-S/S2)
Make sure that you selected the reception source DVB-S(Tuner mode – Satellite).
Satellite setting
ALERT:
Have aprofessional install your satellite antenna to ensure you get quality and
uninterrupted reception. The professional will inform you about the technical
parameters (in particular DiSEqC), which he used during the installation process
and which shall be entered into the TV receiver for asuccessful tuning process.
Auto Search
Depending on the set parameters press OK to scan.
Manual satellite tuning
Correctly determine the received satellites and assign them to DiSEqC. You can select
atransponder to control the received signal (e.g. Astra 3/23,5° E, 12070 GHz, horizontal,
27500 kSym/s). Also set the other satellite reception-specific parameters according to the
installation that the antenna installer tells you.
Scan Mode
Select for search amode among Default/Network Scan/Blind Scan/Fastscan.
EN 17
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Menu
Note:
Depending on the model, design, and region, all options may not be available.
Clean channel list
Used to clear the programs list.
Programs List
Shows the same list as when pressing the CHLIST button on the remote control.
EPG
Shows programs and shows guide.
Channel organizer
Allows you to customize the channel list by functions:
Skip aspecific program
SortReplace always of two channel positions, Insert specific channel at
apreviously vacated channel.
Edit name of the channel
Delete from the list and vacate the position
Channel diagnostic
Displays digital modulation information and signal strength information and signal quality
of the selected program. For undisturbed reception, signal quality is particularly important,
reflecting signal damage by e.g. atmospheric phenomena. We recommend that you keep
your signal quality as close to 100% as possible by using agood quality antenna.
Time shift
Selection On allows the use of time shift. Only for free (FTA) channels!
Subtitles
Subtitle – if on (On), you can select the language of the subtitles for Normal the main
– primary and secondary used if available in the broadcast.
Hearing impaired – displays descriptions of the program if available.
Teletext
Choose Teletext encoding for correct viewing – East, West, Russian, and so on.
REC
Start of recording. Only for free (FTA) channels!
6.5. Smart TV
Selection of Smart TV allows: access to Smart TV Portal with applications, access to
media DLNA server Share&Watch, set up hybrid TV HbbTV, set up Netflix service access
according to your own login data, wireless WiFi display and powering on during Standby.
Extensive Smart TV settings can be deleted in one time by selecting Reset Smart TV
function.
18 EN
EN
Revision 06/2020
Copyright ©
2020, Fast ČR, a. s.
Menu
WiFi display
When you choose Wi-Fi display you switch the TV to reception from amobile phone or
atablet. Check, if your phone is equipped with remote screen technology or acompatible
one (e.g. Miracast). You can view the connection data directly on the main TV screen. On
your mobile phone, select the TV where your mobile phone will send the broadcast. To
end the connection press the button EXIT on your remote controller.
HbbTV
Turn on if you want to receive additional information via an Internet connection for some
programs. TV stations that broadcast this data will display their own reception alert in the
picture. Switch to this data using the Red button on the remote controller and continue
according to the instructions of that TV station.
Terms of Use and Privacy Policy
You can display again the terms and conditions as they were displayed during the initial
setup.
6.6. Network
Internet connection (On/Off) (Internet connection – On/Off)
Use smart apps and HbbTV to connect your TV to the internet.
Interface
Choose between awired or wireless WiFi connection.
Ethernet – only with Wired option (Wired)
Next select IP setting if your cable connection has automatic connecting available. In this
case keep the following selection DHCP on ON. Or you can set the connection method
manually for afixed address, in which case select DHCP to OFF. Next, you have to
enter the IP address, Netmask, Gateway and DNS according to your network operator
information.
WiFi – only with the Wireless option, then Wireless setting
TV searches wireless networks (option Scan). If your network is not listed (for example,
it is set as hidden), you must add it manually by selecting Manual. For this you will
need its SSID name and security. After selecting your network, enter the correct access
information, e.g. your password, according to the security method. IP Setting (IP Setting)
you can perform the same way as with the cable connection (see above), automatically
DHPC or manually.
Information
The TV will briefly check Internet access and report on the set parameters.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Sencor SLE 32S601TCS User manual

Category
Soundbar speakers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI