Tannoy CVS6 User manual

Category
Portable speakers
Type
User manual

Tannoy CVS6 is a ceiling speaker system designed to provide excellent sonic quality for applications requiring both music and speech reinforcement. It features a 150mm (6.00") mid bass driver with a coaxially mounted 19mm (0.75") high frequency section, delivering a wide and controlled constant directivity dispersion for optimum coverage. With a low insertion loss 60W line transformer, it offers easy configurability to 70V or 100V systems.

Tannoy CVS6 is a ceiling speaker system designed to provide excellent sonic quality for applications requiring both music and speech reinforcement. It features a 150mm (6.00") mid bass driver with a coaxially mounted 19mm (0.75") high frequency section, delivering a wide and controlled constant directivity dispersion for optimum coverage. With a low insertion loss 60W line transformer, it offers easy configurability to 70V or 100V systems.

Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
The Tannoy CVS6 is a full bandwidth ceiling speaker system. The design comprises a
150mm (6.00”) mid bass driver with a coaxially mounted 19mm (0.75”) high frequency sec-
tion mounted in a vented, injection moulded, paintable front baffle manufactured from
UV/weather resistant UL94V-0 ABS material.
The mineral loaded polypropylene cone material and nitrile rubber surround enhance dura-
bility and long-term reliability. This compact unit is specifically designed for applications re-
quiring the combination of excellent sonic quality for music and speech reinforcement and
exceptional reliability.
The CVS6 is equipped with a low insertion loss 60W line transformer easily configurable to
the following settings via front baffle mounted rotary tapping switch:
70V systems: 60W / 30W / 15W / 7.5W / OFF & low Impedance operation
100V systems: 60W / 30W / 15W / OFF & low Impedance operation
The CVS6 is supplied with an integral zinc-plated steel back can, with recessed termination
box, to satisfy the vast majority of installation application requirements. The removable
locking connector has screw terminals for secure wire termination and "loop through" facil-
ity. Strain relief is provided by a clamping mechanism for use with plenum rated cable or
conduit. Security toggle clamps make for quick and easy installation, while two tile support
rails and one C-ring are also included in the package. A plaster (mud) ring is available as
an optional accessory.
Product Description
Coaxially mounted 150 mm (6.00") mineral loaded
woofer with rubber surround and 19mm (0.75")
soft dome diffraction loaded tweeter.
High power & high sensitivity with extended
frequency response and very low distortion
Wide, controlled constant directivity dispertion for
optimum coverage.
UV/weather resistant UL94V-0 ABS front baffle
Easily accessible tapping switch on front baffle.
Low insertion loss 60W line transformer
Ferrofluid cooled neodymium HF
Packaged with tile rails and C-ring for quick & easy
installation and simple stocking logistics
Multizone Foreground Music & Paging Systems
Boardrooms & Offices
Business Music Systems
Airports, Convention Centres, Hotels
Reception / Waiting Rooms
Houses of Worship
Retail Outlets / Shopping Malls
Lounges / Bars
Cruise Ships
Courtrooms
Features
Applications
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
F
requency Response (-3dB)
(
1)
7
9Hz - 21kHz
Frequency Range (-10dB)
(1)
60Hz - 24kHz
S
ystem Sensitivity (1W @1m)
(
2)
9
1dB (1W - 2.45V for 6Ω)
Nominal Coverage Angle 90 Degrees Conical
C
overage Angle (1kHz to 6kHz) 93 Degrees Conical
Directivity Factor (Q) 7.7 average 1kHz to 6kHz
D
irectivity Index (DI) 8.0 averaged 1kHz to 6Hz
Rated Maximum SPL 109dB (average)
1
15dB (peak)
Power Handling
Average 60W
Programme 120W
Peak 240W
Recommended Amplifier Power 120@ 6Ω
Nominal Impedance 6Ω
Transformer Taps
(via front rotary switch)
70V 60W / 30W / 15W / 7.5W / OFF
& Low Impedance operation
100V 60W / 30W / 15W / OFF
& Low Impedance operation
Distortion
10% Full Power 2nd Harmonic 3rd Harmonic
250Hz 0.439% 0.140%
1kHz 0.396% 0.458%
10kHz 0.235% 0.023%
1% Full Power 2nd Harmonic 3rd Harmonic
250Hz 1.16% 0.214%
1kHz 1.014% 0.685%
10kHz 0.944% 0.047%
Crossover 2.5kHz
Notes
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, and Ease™ Data can be
downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Low Frequency 150mm (6.00”) mineral loaded cone
H
igh Frequency 19mm (0.75) softdome
Physical
S
ystem Type Ceiling speaker with integral
(Blind Mount) Back Can
E
nclosure
Backcan Zinc plated steel
Baffle Reflex loaded UL 94V-0 rated ABS
G
rille Steel, with weather resistant coating
S
afety Features Safety ring located at rear of enclosure
for load bearing safety bond
Clamping Design Security Toggle Clamp
Backcan Options
Blind Mount (BM) Yes
Pre Install (PI) NA
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Connectors Removable locking connector with screw
terminals with "loop through" facility
Safety Agency Rating
(pending)
U, CEL-1480, Ul-2043
BM Hole Cutout Diameter 250mm (9.84”)
Dimentions
Bezel Diameter
279.5mm (11.01”)
Front of ceiling to
rear of backcan 246.5mm (9.70”)
Front of Ceiling to
top of safety loop 258.5mm (10.18”)
Included Accessories C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories Plaster (Mud) Ring
System CVS6
Transducers
8001 4240 CVS6 White / paintable 2 15.00 (33.07)
8001 4180 CVS6 Plaster (Mud) Rin Zinc plated steel 10 6.00 (13.23)
8001 3830 CMVS6 PI back can Zinc plated steel 1 3.10 (6.83)
PART NUMBER PACKED WEIGHTPACKED QUANTITYCOLOURMODEL NAME
Ordering Information
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
PERFORMANCE MEASUREMENTS
50
60
70
80
9
0
100
10 100 1000 10000 100000
0
5
10
15
20
25
30
35
1 10 100 1000 10000 100000
p ( )
50
60
70
80
90
100
10 100100010000 100000
0 deg
10 deg
20deg
30deg
40deg
A
NECHOIC
FREQUENCY
RESPONSE
IMPEDANCE
OFF AXIS
RESPONSE
1
m on-axis frequency response
frequency (Hz)
SPL, 1W/1m (dB)
frequency (Hz)
Impedance vs frequency
frequency (Hz)
Impedance (ohms)
Level (dB)
Horizontal off-axis response
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
PERFORMANCE MEASUREMENTS
0
3
0
60
90
120
1
50
1
80
2
10
240
2
70
300
330
360
1
00 1000 10000
g
1
10
100
100 100010000
Q
BEAMWIDTH
DIRECTIVITY INDEX
B
eamwidth vs Frequency
frequency (Hz)
frequency (Hz)
DI vs Frequency
Q
Degrees
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
-
48
-36
-
24
-12
0
0
30
60
90270
300
330
100 Hz
125 Hz
160 Hz
2
00 Hz
-48
-36
-24
-12
0
0
30
60
90270
300
330
250 Hz
315 Hz
400 Hz
500 Hz
-48
-36
-24
-12
0
0
3
0
60
90270
300
3
30
-48
-36
-24
-12
0
0
3
0
60
90270
300
3
30
-48
-36
-24
-12
0
0
30
60
90270
300
330
630 Hz
800 Hz
1 kHz
1.25 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
4 kHz
5 kHz
6.3 kHz
8 kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
DIMENSIONAL SKETCHES
TEMPLATE HOLE CUTOUT SIZE - 250mm (9.84
"
)
CVS4
27.00
[1.06"]
15.00
[0.59"]
16.00 [0.63"]
4.50 [0.18"]
SUPPLIED ACCESSORIES
C-RING
244.6
[9.63"]
246.5
[9.70"]
15.9
[0.63"]
258.5
[10.18"]
2
79.5
[
11.01"]
OPTIONAL ACCESSORIES
PLASTER (MUD) RING
60.00
[2.36"]
180.00 [7.09"]
205.00 [8.07"]
230.00 [9.06"]
255.00 [10.04"]
280.00 [11.02"]
305.00 [12.01"]
650.00 [25.59"]
10.00
[0.39"]
251.00 [9.88"]
318.00 [12.52"]
168.00 [5.96"]
251.00
[7.40"]
318.00
[11.34"]
80.00
[3.15"]
168.50 [5.96"]
8001 4240 CVS6 White / paintable 2 15.00 (33.07)
8001 4180 CVS6 Plaster (Mud) Rin Zinc plated steel 10 6.00 (13.23)
8001 3830 CMVS6 PI back can Zinc plated steel 1 3.10 (6.83)
PART NUMBER PACKED WEIGHTPACKED QUANTITYCOLOURMODEL NAME
Ordering Information
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
T
he Ceiling Speaker System shall consist of a 150mm (6.00") mineral loaded mid bass driver with coaxially mounted 19mm (0.75") high frequency unit and
p
assive frequency dividing network mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material.
T
he backcan shall be constructed of zinc plated steel. A recessed termination box shall be integrated with the backcan, a removable locking connector with
screw terminals for secure wire termination with "loop through" facility shall be provided. Strain relief will be provided by a clamping mechanism for use with
p
lenum rated cable or conduit. A safety ring is located on the rear of the backcan for a load bearing safety bond.
Performance of the ceiling speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 93 degrees (1kHz to
6
kHz). Frequency response measured on axis shall be 60Hz -24kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with
no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handling capacity as defined in EIA-426B test shall be 60W, recommended amplifier
power 120W. The nominal system impedance shall be 6W (in low impedance setting).
The ceiling speaker system shall be equipped with a 60W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with 60, 30,
1
5, 7.5* Watt taps available. An easily accessible rotary switch located on the front baffle shall be available for selecting transformer and low impedance set-
tings. A weather resistant perforated steel grille covers the transducer and switch.
T
wo support rails and one C-Ring shall be included with the ceiling monitor system. The front face diameter shall not exceed 279.5mm (11.01"), overall depth
from the front of the ceiling to the top of the safety loop shall not exceed 258.5mm (10.18").The template cut out diameter shall be 250mm (9.84")
The Ceiling Monitor System shall be the.....CVS6
*70 Volt only
Architectural specifications
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
NOTES
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Tannoy CVS6 User manual

Category
Portable speakers
Type
User manual

Tannoy CVS6 is a ceiling speaker system designed to provide excellent sonic quality for applications requiring both music and speech reinforcement. It features a 150mm (6.00") mid bass driver with a coaxially mounted 19mm (0.75") high frequency section, delivering a wide and controlled constant directivity dispersion for optimum coverage. With a low insertion loss 60W line transformer, it offers easy configurability to 70V or 100V systems.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI