etyBLU etyBLU User manual

User Manual

Dual Mode

Noise-Isolating

Headset

Table of Contents

Introduction..............................................................................4

Included....................................................................................5

Bluetooth Profiles ....................................................................5

Identification............................................................................6

Dual Modes–Two Ways to Use..................................................7

Pairing ....................................................................................8

Charging.................................................................................. 9

Earpiece Insertion/Removal....................................................10

BLUmaxx Connect/Disconnect ................................................11

Multi-Function Button (MFB) ............................................12-13

Earpiece Filter ........................................................................14

Caution ..................................................................................15

FCC Info ............................................................................16-17

Proper Care ............................................................................18

About Etymotic Research........................................................19

Warranty ................................................................................19

LED Chart ..............................................................................20

Introduction

The Etymotic etyBlu dual mode, noise-isolating headset

contains two microphones.One microphone is located internally

at the end of the earpiece; the other, BLUmaxx™,a highly

directional,noise-rejecting microphone quickly connects to the

earpiece. The combination of an in-ear noise-isolating earphone

and a directional microphone placed close to the mouth provides

exceptional sound quality and clear communication at both ends

of the conversation. The etyBLU headset was developed by

Etymotic Research for use in high levels of background noise.

Another Etymotic first.

Included

• etyBLU Dual-Mode Noise-Isolating Headset

• BLUmaxx Quick-Connect Mic

• Earloop

• Assorted eartips

• Windscreen

• Filter changing tool with replacement filter

• Storage case

• USB charging cable

Compliant with Bluetooth® Core Specification 2.1, Headset

1.1 and Handsfree 1.5 profiles (supports Bluetooth 1.1 and

later)

Talk Time: Up to 7 hours

Standby: Up to 100 hours

Range: 30 feet (10 meters)

Weight: Less than .5 oz

Bluetooth Profiles

Identification

A. Eartip

B.Speaker

C. Multi-Function Button (MFB)

D. Volume Up/Down

E. Optional Earloop

F.Earloop Holder

G. Jack for BLUmaxxMic and Charging Cable

H. Quick-Connect BLUmaxxMic

No boom,no earloop

etyBLU with BLUmaxx

connected and earloop

Noise-Canceling

Microphone

Internal Microphone

Dual Modes—Two Ways to Use

Internal Mic Mode

The earpiece is designed to

be self-supporting in the

ear canal, so the earloop

is optional. Push the earloop

through the earloop holder

and adjust for a secure fit.

BLUmaxx Mic Mode

Exceptional clarity in noisy

environments.

- Gives up to 25 dB more

noise cancellation of the

talkers voice compared

to the internal mic.

Important: To ensure optimal performance it is important that

the eartip seals the ear canal.

Pairing

Pairing varies by device

The etyBLU headset is discoverable for five minutes after

Power On.

• Turn the phone OFF and then back ON.

• Turn on the mobile phone’s Bluetooth function.

• Press and hold the Multi-Function Button (MFB) for 5 seconds.

• The blue LED will flash rapidly when ready for pairing.The

etyBLU stays in pairing mode for 5 minutes.

• Activate the search for BT and/or audio devices on the phone

• When the etyBLU is found,the phone will display

“etyBLU.”Scroll to it and press OK to confirm pairing.

• If a passkey/password is requested,enter 0000.

Note: Bluetooth transmitter pairing varies.For best results,

consult the user instructions for the specific device being paired

with the etyBlu.Some mobile phones require a security setting

change for automatic headset-phone pairing.

Charging

The etyBLU headset comes with a rechargeable lithium polymer

battery. Charge the headset for at least one hour before first use.

Charging time from empty: 2-3 hours

80% charge: 1 hour

Charging with the USB connecter (included)

• Remove the BLUmaxx Mic prior to charging

• Plug the connector into the etyBLU headset as shown.

• Plug USB end of the charging cable into a computer

USB port as shown.

• The solid yellow LED will indicate that the headset is charging.

• When charging is complete the yellow LED turns OFF.

Insertion

Important: Sound quality and noise

isolation depend on a good eartip seal.

• Carefully insert the earpiece

while pulling up and out on the

back of the ear.

• Twist the earpiece while inserting

until outside noise is blocked out.

• Position the earpiece for best fit and comfort.

• Flanged eartip: Moistening eases insertion.

• Foam eartip: Roll down or compress foam eartip before

inserting. Hold the eartip in place for about 5 seconds while

the foam expands to create a tight seal in the ear canal.

Removal

To avoid discomfort,remove the headset slowly with a twisting

motion to gradually break the seal. Open jaw slightly to equalize

pressure, because suction can occur when the eartip is removed.

For a video on proper

earphone insertion go to

www.etymotic.com

BLUmaxx Connect/Disconnect

NOTE:The BLUmaxx Mic can quickly connect or disconnect

without disconnecting a call.

To Connect

1.The plug on the BLUmaxx Mic

is designed to connect to the headset only

one way. Do not force the plug into the

jack. It will connect easily.

2.When the BLUmaxx Mic is connected

correctly,the opening at the tip of the

microphone is closest to the mouth and

the opening at the middle of the mic tip

faces away from the mouth.

To Disconnect

1.Grasp the connector and gently remove

the BLUmaxx Mic.

2.Keep the BLUmaxx Mic in the storage

case for easy access.

Noise-canceling microphone

Connector

Hold here to connect/disconnect

Multi-Function Button (MFB)

Power ON PRESS the MFB for 4 seconds to

Power On. Blue LED is solid for

one second while powering ON. Blue

LED blinks when the headset is ON.

Power OFF PRESS the MFB for 4 seconds

to Power Off. Yellow LED is solid for

one second then powers OFF.

Volume PRESS the Volume UP (+) and

Volume DOWN (-) buttons on the side

of the headset to increase or decrease

volume. The exact number of volume

levels is set and maintained by the

phone.

Answer a Call PRESS the MFB once quickly

(short press) to answer a call

when phone rings.

End a Call PRESS the MFB once quickly

(short press) to disconnect the call.

Reject a Call PRESS and HOLD the MFB (long press)

for one second to reject an incoming call.

MFB

Multi-Function Button (MFB)

The following features depend on phone support:

Redial PRESS and HOLD the MFB (long press)

for one second.

Voice Call PRESS the MFB quickly (short press) to

make a voice call. Voice Call works when

the unit is in standby.

Transfer a Call Double PRESS the MFB (two quick presses

to the Handset less than one second) during a call

Call Waiting • PRESS and HOLD the MFB (long press)

for one second to put a call on hold to

answer another

• PRESS and HOLD the MFB (long press) for

one second to switch between calls

• PRESS the MFB quickly (short press) to

end the current active call

3-Way Calling Add another caller: Depending on the

call status,double press the MFB to add

the held call to the conference.

Earpiece Filter

The earpiece in the etyBLU headset has a special filter that

smoothes the frequency response and prevents earwax from

entering the earphone.The filter is located at the end of the

earphone and is visible when the eartip is removed.

Change the filter if loudness decreases or the sound quality

declines. Note: Filters are not reusable.

Filter Removal

Filter Replacement

1. Remove eartip. 2.Insert tool into

the filter.

3. Remove filter.

1. Insert a new filter and press

gently against a hard surface

to secure it in place.

2. Re-attach eartip.

Caution

Consult an audiologist or physician if you have excessive ear

wax,difficulty inserting the eartips,or discomfort after

prolonged use.The etyBLU dual-mode headset excludes most

external sounds. Always use extreme caution while using any

headset when operating a motorized vehicle.

Do not use the headset at excessively loud levels.Research

confirms that earphones that seal the ear canal allow listeners

to listen at safer levels.Noise-induced hearing loss is a function

of exposure time,the average sound level and the peak of very

loud sounds. A sealed eartip and lower listening levels allow for

longer periods of safe listening time.

FCC & Other Information

This equipment has been tested and found to comply with the

limits for a Class B digital device,pursuant to Part 15 of the FCC

Rules.Operation is subject to the following two conditions:

1.This device may not cause harmful interference,and

2.This device must accept any interference received, including

interference that may cause undesired operation.These limits

are designed to provide reasonable protection against harmful

interference in a residential installation.Some equipment oper-

ates at frequencies that may cause interference to nearby TVs

and VCRs;to minimize or prevent such interference,the system

base should not be placed near or on top of a TV,PC monitor, or

VCR;and,if interference is experienced,moving the desk station

farther away from the TV or VCR will often reduce or eliminate

the interference.However,there is no guarantee that interfer-

ence will not occur in a particular installation.If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the system off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

1.Increase the separation between the equipment and receiver.

2.Consult the dealer or an experienced radio TV technician for

help.

FCC & Other Information

FCC Health and Safety Information

Your device is a radio transmitter and receiver.It is designed and

manufactured not to exceed the emission limits for exposure to

radio frequency (RF) energy set by the Federal Communications

Commission of the U.S. Government.The FCC has established

criteria for the amount of radio frequency energy various products

may produce depending on their intended usage.This product has

been evaluated and found to comply with the FCC’s exposure

criteria.For body worn operation, the FCC RF exposure guidelines

were also met when used with the accessories supplied or

designed for this product. Use of other accessories may not ensure

compliance with FCC RF exposure guidelines and should be

avoided. Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could void the

user’s authority to operate this device.This device must not be

colocated with other transmitters.

Proper Care

• Do not expose the headset to extreme temperatures.

• Avoid dropping and strong impact.

• Leave an eartip on the headset for shock protection.

Cleaning/replacement of eartip

• Clean or replace a flanged eartip prior to use by others.

• Replace a foam eartip prior to use by others.

• Clean a flanged eartip by simply wiping it off with a soft cloth.

If water and mild soap are used,remove the eartip,clean and

dry it before replacing it on the headset.

• Replace disposable foam eartips regularly.

• Replace flanged eartips every 6-12 months.

About Etymotic Research

Etymotic Research, Inc. warrants this product against defects in

material or workmanship for a period of two years from the date

of original purchase from an authorized Etymotic distributor or

reseller.Etymotic will repair or replace the defective product at its

option if returned within the warranty period to our designated

service facility.This warranty is in lieu of all other warranties,

expressed or implied,including,but not limited to, any implied

warranty of merchantability or fitness for a particular purpose.

Warranty

Etymotic Research has spent twenty-five years developing in-ear

technology for auditory research,precision monitoring and critical

listening.Etymotic has developed many innovative hearing

technologies available today.Etymotic’s products are used by

musicians and others who insist on superior sound quality.

Etymotic means“true to the ear.”

ETYMOTIC RESEARCH INC.

61 Mar tin Lane • Elk Grove Village, IL 60007

www.etymotic.com • 1-888-389-6684

Bluetooth SIG, Inc.

ER089401 03/10

LED Chart

Power ON Blue LED is solid for

one second while powering on

Power OFF Yellow LED is solid for

one second then powers off

Pairing Blue LED blinks twice every

3 seconds

Active call Blue LED blinks once per second

No active call Blue LED blinks every 4 seconds

Charging Solid yellow LED

Low battery Blinking yellow LED

Charge complete Yellow LED off

etyBLU etyBLU, Dual Mode Noise-Isolating Headset User manual

Other documents