2. Computers & electronics
  3. TVs & monitors
  4. LCD TVs
  5. LG
  6. 32LD650H
32LD650H

LG 32LD650H User manual

  • Hello! I am an AI chatbot trained to assist you with the LG 32LD650H User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.lg.com
OWNER’S MANUAL
LED LCD TV/LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or regis-
tered trademarks of HDMI Licensing LLC.
Separate purchase
Wall Mounting Bracket
(32LD6
***
, 32LV3
***
)
LSW100B or
LSW100BG
(37/42/47LD6
***
, 37LV3
***
) (42/47LV3
***
)
LSW200B or
LSW200BG
LSW400B or
LSW400BG
I
CONTENTS
CONTENTS
PREPARATION
LCD TV Models : 32/37/42/47LD6
***..............A-1
LED LCD TV Models : 32/37/42/47LV3
***
....A-13
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component cable
..................2
Connecting with an HDMI cable
.........................3
Connecting with an HDMI to DVI cable
..............4
Connecting with a Euro Scart cable
...................5
Usb setup
............................................................6
Connecting with AN RF Cable
............................6
Connecting with a D-sub 15 pin cable
................7
Speaker output Setup
.........................................7
Insertion of A CI Module
......................................8
Headphone Setup
...............................................8
Digital audio out Setup
........................................9
Supported Display Resolution
...........................10
Screen Setup for PC mode
...............................12
Network setup
...................................................16
WATCHING TV / PROGRAMME CONTROL
Turning on the TV .............................................17
Initializing Setup
...............................................17
Programme Selection
........................................17
Volume Adjustment
...........................................17
Quick Menu
.......................................................18
On Screen Menus Selection and adjustment
...19
Auto programme tuning
...................................21
Manual programme Tuning
...............................22
Programme Edit
...............................................26
Booster
..............................................................28
CI [Common Interface] Information
...................29
Selecting the Programme List
...........................30
Input List
............................................................31
Input Label
........................................................32
Data Service
......................................................33
SIMPLINK
..........................................................34
AV Mode
............................................................38
Initializing(Reset to original factory settings)
....39
TO USE A USB DEVICE
When connecting a USB device .......................40
Movie list
...........................................................42
Photo list
............................................................53
Music list
............................................................63
Extra Contents
..................................................72
DIVX® VOD GUIDE
..........................................73
DIVX® VOD DEREGISTRATION
.....................74
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on/off EPG .............................................76
Select a programme
..........................................76
Button Function in NOW/NEXT Guide Mode
...76
Button Function in 8 Day Guide Mode
.............77
Button Function in Date Change Mode
............78
Button Function in Extended Description Box
..78
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................79
Picture Wizard
...................................................81
Energy Saving
...................................................82
Preset Picture Settings
.....................................83
Manual Picture Adjustment
...............................84
Picture Improvement Technology
......................86
Expert Picture Control
.......................................87
Picture Reset
.....................................................90
Trumotion
..........................................................91
Demo Mode
.......................................................92
Power Indicator
.................................................93
II
CONTENTS
CONTENTS
SOUND & LANGUAGE CONTROL
Auto Volume Leveler .........................................94
Clear Voice II .....................................................95
Preset Sound Settings-Sound Mode ................96
Sound Setting Adjustment -User Mode ............97
Infinite Sound ....................................................97
Balance .............................................................98
DTV Audio Setting (in digital mode only) ..........99
Selecting Digital Audio out ..............................100
Audio Reset .....................................................101
Audio Description (In digital mode only) .........102
I/II
Stereo/Dual Reception (In Analogue Mode Only) ..103
NICAM Reception (In Analogue Mode Only) ..104
Speaker Sound Output Selection ...................104
On-Screen Menu Language / Country Selection .. 105
Language Selection ........................................106
TIME SETTING
Clock Setup .....................................................108
Auto on/off time setting ...................................109
Sleep Timer setting .........................................110
Alarm setting ................................................... 111
Automatic Standby ..........................................112
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................113
Block Programme ............................................114
Parental Control (In Digital Mode only) ...........115
External Input Blocking ...................................116
Key Lock..........................................................117
TELETEXT
Switch on/off ...................................................118
SIMPLE Text....................................................118
TOP Text..........................................................119
FASTEXT ........................................................119
Special Teletext Functions ..............................120
DIGITAL TELETEXT
Teletext within Digital Service .........................121
Teletext in Digital Service ................................121
APPENDIX
Troubleshooting ...............................................122
Maintenance ....................................................124
Product Specifications ...................................125
IR Codes .........................................................129
External Control Device Setup ........................130
Open source software notice ..........................137
A-1
PREPARATION
LCD TV MODELS : 32/37/42/47LD6
***
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains
or fingerprints on the
surface of the TV with
the polishing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
AV MODE INPUT
ENERGY
SAVING
EXIT
OK
BACK
PORTAL
Q.MENU
1
.,;@
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
0
[
9
wxyz
LIST
Q.VIEW
GUIDE
AD
ALARM
INFO
MARK
RATIO
MUTE
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
MENU
Ferrite Core
(
This item is not included
for all models.
)
Install the power plug closely.
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Power Cord
Protection cover
Bolts for stand assembly
(M4x20)
x 8
Protective Bracket and
Bolt for Power Cord
(This feature is not
available for all models.)
1-screw for stand fixing
Cable HolderPlug in type Holder
PREPARATION
Only 32/37/42LD6
***
A-2
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
■ Image shown may differ from your TV.
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
SPEAKER
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
A-3
PREPARATION
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
14
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
8
11
7
1
9 10
ANTENNA IN
12
BACK PANEL INFORMATION
32/37/42LD6
***
■ Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.125 to 128) Never attempt to operate
the TV on DC power.
Antenna Input
Connect antenna or cable to this jack.
LAN
Network connection.
Also used for video, photo and music files on
a local network.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
Component Input
Connect a component video/audio device to
these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
SPEAKER OUTPUT(STEREO)
The phone socket for external speaker is on
this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
8
9
10
11
12
13
14
7
2
43
5
6
13
A-4
PREPARATION
PREPARATION
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
15
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
AUX LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
ANTENNA
IN
8
11
7
1
9 10
13
47LD6
***
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.125 to 128) Never attempt to operate
the TV on DC power.
LAN
Network connection.
Also used for video, photo and music files on
a local network.
AUX LAN
Network connection.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
Component Input
Connect a component video/audio device to
these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
SPEAKER OUTPUT(STEREO)
The phone socket for external speaker is on
this jack.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
7
12
4
3
5
6
14
2
A-5
PREPARATION
STAND INSTALLATION
Fix the 4 bolts securely using the holes in
the back of the TV.
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened.
(If not tightened fully, the product can tilt forward after the product installation.)
If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening
part of the bolt.
4
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
1
3
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
Tighten the stand with the
four screws (provided as
parts of the TV).
x 4
M4 X 20
A-6
PREPARATION
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■ Image shown may differ from your TV.
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the Protective
Bracket/Bolt or the Plug in type Holder. It
will help prevent the power cable from being
removed by accident.
AC IN
AC IN
AC IN
AC IN
Protective Bracket/Bolt
( This feature is not available
for all models.)
Plug in type Holder
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
or
AC IN
AC IN
AC IN
AC IN
AC IN
Install the Cable Management Clip as shown.
If your TV has the Cable Holder, install it as
shown and bundle the cables.
Cable Management Clip
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Holder
2
Put the cables inside the Cable
Management Clip and snap it closed.
3
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
►Do not hold the Cable Management Clip when moving the TV.
- If the TV is dropped, you may be injured or the product may be broken.
►With some TVs, the Plug in type Holder and the Cable Holder are included. If these holders
are inserted into the hole provided on back of the TV, they cannot be removed.
NOTE
32/37/42LD6
***
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the Protective
Bracket/Bolt. It will help prevent the power
cable from being removed by accident.
AC IN
AC IN
AC IN
AC IN
Protective Bracket/Bolt
( This feature is not available
for all models.)
AC IN
AC IN
AC IN
AC IN
AC IN
Put the cables inside the Cable
Management Clip and snap it closed.
2
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
47LD6
***
A-7
PREPARATION
SWIVEL STAND
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
ATTACHING THE TV TO A
DESK
■ Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
NOT USING THE
DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection Cover into the TV until
clicking sound.
Protection Cover
►Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
Desk
Stand
WARNING
►To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw ( provided as parts of the product)
4-Screws
(not provided as parts of the product)
Desk
Stand
(Only 32/37/42/47LD6
***
)
(Only 32/37/42LD6
***
)
A-8
PREPARATION
PREPARATION
■ This feature is not available for all models.
■ Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
CAREFUL INSTALLATION
ADVICE
■ You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
► When moving the TV undo the cords first.
► Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
► To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
NOTE
► The Kensington Security System is an optional
accessory.
► If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal
, there is nothing wrong with TV.
► Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
► Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortio
n
effects on the screen.
A-9
PREPARATION
■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
■ We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
■ We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
■ LG recommends that wall mounting be per-
formed by a qualified professional installer.
DESKTOP PEDESTAL
INSTALLATION
10 cm
10 cm
10 cm
10 cm
NOTE
►Should Install wall mount on a solid wall
perpendicular to the floor.
►Should use a special wall mount, if you
want to install it to ceiling or slanted wall.
►The surface that wall mount is to be
mounted on should be of sufficient
strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hol-
low block.
►Installing screw type and length depends
on the wall mount used. Further informa-
tion, refer to the instructions included with
the mount.
►LG is not liable for any accidents or dam-
age to property or TV due to incorrect
installation:
- Where a non-compliant VESA wall
mount is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause
personal injury.
- Not following the recommended
Installation method.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
■ Image shown may differ from your TV.
Model
VESA
(A
*
B)
Standard
Screw
Quantity
32LD6
***
200
*
100 M4 4
37/42/47LD6
***
200
*
200 M6 4
A-10
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
AV MODE INPUTENERGY
SAVING
EXIT
OK
BACK
PORTAL
Q.MENU
1.,;@ 2 abc 3 def
4 ghi 5 jkl 6
mno
7
pqrs
8 tuv
0
[
9
wxyz
LIST
Q.VIEW
GUIDE
AD
ALARM
INFO
MARK
RATIO
MUTE
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
MENU
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(► p.82)
It helps you select and set images and sounds
when connecting AV devices.(► p.38)
External input mode rotate in regular sequence.
(
►
p.31)
Selects Radio, TV and DTV programme.
Shows programme guide.
(
►
p.75)
Displays and removes the hotel interactive menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
►
p.19)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
GUIDE
PORTAL
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
MENU
BACK
EXIT
Q. MENU
AD
ALARM
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or
Audio Language)
, Sleep Timer, Skip Off/
On, USB Device).
(
►
p.18)
Switches the Audio Description On or Off.
Sets the alarm function.
A-11
PREPARATION
AV MODE INPUTENERGY
SAVING
EXIT
OK
BACK
PORTAL
Q.MENU
1.,;@ 2 abc 3 def
4 ghi 5 jkl 6
mno
7
pqrs
8 tuv
0
[
9
wxyz
LIST
Q.VIEW
GUIDE
AD
ALARM
INFO
MARK
RATIO
MUTE
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
MENU
1
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
(►
p.118)
Recalls your preferred subtitle in digital mode.
1
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(►
p.34)
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
0 to 9 number
button
(Space)
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Opens an empty space on the screen keyboard.
Displays the programme table.
(
►
p.30)
Returns to the previously viewed programme.
]
A-12
PREPARATION
PREPARATION
AV MODE INPUTENERGY
SAVING
EXIT
OK
BACK
PORTAL
Q.MENU
1.,;@ 2 abc 3 def
4 ghi 5 jkl 6
mno
7
pqrs
8 tuv
0
[
9
wxyz
LIST
Q.VIEW
GUIDE
AD
ALARM
INFO
MARK
RATIO
MUTE
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
MENU
Installing Batteries
■ Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
■ Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
■ Close cover.
■ To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA
Menu
control buttons
Controls SIMPLINK or MY MEDIA menu (Photo List,
Music List and Movie List).
VOLUME UP
/DOWN
CHAR/NUM
MARK
RATIO
DELETE
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Shifts the Character or Number.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(► p.79)
Deletes the entered character when entering the
character on the screen keyboard.
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
A-13
PREPARATION
LED LCD TV MODELS : 32/37/42/47LV3
***
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
Owner’s Manual
Batteries
(AAA)
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains
or fingerprints on the
surface of the TV with
the polishing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
Remote Control
AV MODE INPUT
ENERGY
SAVING
EXIT
OK
BACK
PORTAL
Q.MENU
1
.,;@
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
0
[
9
wxyz
LIST
Q.VIEW
GUIDE
AD
ALARM
INFO
MARK
RATIO
MUTE
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
MENU
Ferrite Core
(
This item is not included
for all models.
)
Install the power plug closely.
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Bolts for stand assembly
(M4x12)
Only 32/37LV3
***
x 8
1-screw for stand fixing
A-14
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
■ Image shown may differ from your TV.
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
HOME
SPEAKER
PROGRAMME
VOLUME
OK
HOME
INPUT
POWER
Touch buttons
1
1. Touch Button - You can use the desired button function by touching.
Touch button Description
Scrolls through the saved programmes
Adjusts the volume level
Selects the highlighted menu option or confirms an input
HOME
Accesses the main menus, or saves your input and exits the menus
Changes the input source
Turns the power on or off
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
A-15
PREPARATION
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.125 to 128) Never attempt to operate
the TV on DC power.
LAN
Network connection.
Also used for video, photo and music files on
a local network.
AUX LAN
Network connection.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
Component Input
Connect a component video/audio device to
these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
SPEAKER OUTPUT(STEREO)
The phone socket for external speaker is on
this jack.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
7
1
2
HDMI/DVI IN
(RGB)
LAN
AUX LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
ANTENNA
IN
1
2
HDMI/DVI IN
(RGB)
LAN
AUX LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
ANTENNA
IN
15
1
2
HDMI/DVI IN
(RGB)
LAN
AUX LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
ANTENNA
IN
8
11
7
1
9 10
13
12
4
3
5
6
14
2
A-16
PREPARATION
PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened.
(If not tightened fully, the product can tilt forward
after the product installation.)
If you tighten the bolt with excessive force, the
bolt can deviate from abrasion of the tightening
part of the bolt.
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
3
Assemble the parts of the Stand Body
with the Stand Base of the TV.
2
Stand Body
Stand Base
M4 X 12
BACK COVER FOR WIRE
ARRANGEMENT
■ Image shown may differ from your TV.
1
Gather and bind the cables with the Cable
Holder on the TV back cover.
Cable Holder
SWIVEL STAND
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
Assemble the TV as shown.
4
Secure the TV and the stand with the 4
screws.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/