KYOCERA CS-4050 Operating instructions

CS-4050
KYOCERA
Brand
KYOCERA
Model
CS-4050
Category
Multifunctionals
Type
Operating instructions

This manual is also suitable for

If Reserve Next Priority Setting is set to Off
Follow the procedure below to use interrupt copying.
1
In the printing in progress screen, press
[Interrupt]. The current print job is temporarily
interrupted.
2
Place the originals to be used in interrupt copying onto the machine and select the Copy function.
3
Press the Start key to start copying.
4
When interrupt copying ends, press [Interrupt]. The machine resumes the paused jobs.
NOTE: If the machine is left for 60 seconds, interrupt copying is automatically cancelled and printing
resumes.
Canceling Jobs
For more information on canceling jobs, refer to page 3-53 of the Operation Guide.
If Reserve Next Priority Setting is set to On
Press the Stop key on the operation panel to pause all jobs. The Job Cancel screen appears. Select
the job you want to cancel and press [Cancel]. In the confirmation screen, press [Yes]. Press [Close]
to resume the paused jobs.
NOTE: If the machine is left for 60 seconds, the Job Cancel screen is automatically closed and the
paused jobs resumes.
If Reserve Next Priority Setting is set to Off
Press [Cancel] or the Stop key on the operation
panel to cancel the job currently printing.
Reserve Next Priority Setting
Select the operation of the reserve copy and interrupt copy functions and for canceling jobs.
Use the procedure below to select the default Reserve Next Priority setting.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Reserve Next Priority.
3
Select the default for [Off] or [On].
4
Press [OK].
Cancel Reserve NextInterrupt
Stat us
10/10/2006 10:10
Copying...
Copies
Scanner Sett ing
24
Copies
Printer Setting
Collate
Top Tray
Top Edge Top
100%
Original Pages
Job No .: Job Name : User Name:000021 doc 200 60505113414 -----
2-sided
2-sided
2
A4 PlainA4
242/
Cancel Reserve NextInterrupt
Stat us
10/10/2006 10:10
Copying...
Copies
Scanner Sett ing
24
Copies
Printer Setting
Collate
Top Tray
Top Edge Top
100%
Original Pages
Job No .: Job Name : User Name:000021 doc 20060505113414 -----
2-sided
2-sided
2
A4 PlainA4
242/
2
Notification of Changed Content (Operation Guide and Advanced Operation Guide)
Reserve Next Priority Setting
The procedures for using the reserve copy and interrupt copy functions and for cancelling jobs vary
depending on whether Reserve Next Priority Setting of the System menu is set to On or Off.
Reserve Copy
This function allows you to scan an original to reserve the next copy job while the machine is printing.
When the current print job ends, the reserved copy job is printed.
If Reserve Next Priority Setting is set to On
After the machine finishes scanning the originals, reserve the next copy job.
If Reserve Next Priority Setting is set to Off
Follow the procedure below to reserve the copy job.
1
Press [Reserve Next]. The default screen
appears.
2
Place the originals and select the Copy function.
3
Press the Start key. The machine starts scanning the originals.
Interrupt Copy
This function allows you to pause jobs that are being printed when you need to make urgent copies.
If Reserve Next Priority Setting is set to On
Follow the procedure below to use interrupt copying.
1
Press [Interrupt]. Ready for interrupt copy. is
displayed. The current print job is temporarily
interrupted.
2
Place the originals to be used in interrupt copying onto the machine and select the Copy function.
3
Press the Start key to start copying.
4
When interrupt copying ends, press [Interrupt]. The machine resumes the paused jobs.
NOTE: If the machine is left for 60 seconds, interrupt copying is automatically cancelled and printing
resumes.
Cancel Reserve NextInterrupt
Stat us
10/10/2006 10:10
Copying...
Copies
Scanner Sett ing
24
Copies
Printer Setting
Collate
Top Tray
Top Edge Top
100%
Original Pages
Job No .: Job Name : User Name :000021 doc 200 60505113414 ---- -
2-sided
2-sided
2
A4 PlainA4
242/
Status 10/10/2006 10:10
Original
Zoom
Paper
100 %
-- -
:
:
:
-- -
Image
Quality
Ready to copy.
Set Original.
Copies
Copy Image
Org./Paper /
Finis hing
Quick Setup Layout /Edit Advanced
Setup
1
Normal 0 Lett er
Zoom Dens ity Paper
Selection
1-s ided
>>1-sided
Text+Photo Collate
Duplex Original
Image
Collate/
Offset
Auto
Plain
Preview
Interrupt
2007.6
302GN56491
1
Default Screen
The following options are added to the selection for the screen appearing right after start-up (default
screen). (Refer to page 2-31 in the Operation Guide or page 6-3 in the Advanced Operation Guide.)
Orientation Confirmation
Select whether to display a screen for selecting the orientation of the originals to be placed on the
platen when using the following functions. (For more information, refer to page 1-10 in the Advanced
Operation Guide.)
•Duplex
• Margin/Centering originals
• Border erase
• Combine mode
• Memo mode
• Page numbering
• Booklets
• Stapling/Punching (optional feature)
* If [On] is selected as the Orientation Confirmation setting, the selection screen for original
orientation appears when you select any of the above functions.
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].
Registering Programs
Steps 2 to 5 are changed as below. (Refer to page 1-59 in the Advanced Operation Guide.)
2
Press [Register] and press a number (01 to 50) for the program number. If entering Program screen
from the Copy screen or Send screen, go to step 4.
3
Check that [Copy] is selected and press [Next].
4
Enter the new program name and press [Register] to register the program.
Item Description
Application The Application screen (the screen shown when the
Application key is pressed) appears.
Accessibility Copy The Accessibility Copy screen (the screen shown when the
Accessibility Display key is pressed in the Copy screen)
appears.
Accessibility Send The Accessibility Send screen (the screen shown when the
Accessibility Display key is pressed in the Send screen)
appears.
3
Registering Shortcuts
The explanation is changed as below. (Refer to page 1-61 in the Advanced Operation Guide.)
Add shortcuts to the Quick Setup screen as a quick and easy way to access frequently used functions.
Function names linked to registered shortcuts can be changed as necessary.
You can register shortcuts for up to 5 copying functions and up to 6 sending functions.
Adding Shortcuts
Steps 3 to 4 are changed as below. (Refer to page 1-61 in the Advanced Operation Guide.)
3
Enter the shortcut name and press [Register] to add the shortcut. Press [Close].
Output Tray
Step 3 is changed as below. (Refer to page 6-19 in the Advanced Operation Guide.)
3
Press [Change] of Copy/Custom Box, Printer, FAX Port 1 or FAX Port 2.
NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits
installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX).
Paper Selection
Step 3 is changed as below. (Refer to page 1-6 in the Advanced Operation Guide.)
3
Press [Org./Paper/Finishing], [Paper Selection] and then [MP Tray Setting].
4
  • Page 1 1
  • Page 2 2

KYOCERA CS-4050 Operating instructions

CS-4050
KYOCERA
Brand
KYOCERA
Model
CS-4050
Category
Multifunctionals
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents