Welcome
Thank you for having purchased the new Sytech CD Micro Hifi
System SY-8045BT. Please read carefully the manual to fully
benefit from this unit. In order to avoid damage or personal injuries,
always follow the safety instructions mentioned on this user manual.
Safety Precautions
Electrical Danger! May cause electric shock
when opened.
Important! Please refer to operating instructions
The symbol for CLASS II (Double insulation)
WARNING: To reduce the risk of fire or electrical shock, do not
expose this equipment to rain or moisture. Do not
attempt to open the equipment to prevent contact
with high voltage components inside. Please contact
the seller for technical assistance.
DANGER: When opened, both visible and invisible laser
radiation will beam out. Avoid direct exposure. Do
• To prevent electrical shock, align power plug properly and insert
fully.
• This product uses a laser component. Use of controls,
adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• Do not open the equipment and do not repair by yourself. Refer
servicing to qualified personnel only.
1
or manual.
not open equipment.
Safety instruction and maintenance
Please read and understand all warnings and instructions given in
this user guide and those marked on the unit. Retain this guide for
future reference. This set has been designed and manufactured to
assure personal safety.
Power Sources: This unit Keep the unit and the Avoid direct sunlight and
should only be used as power plug away from heating.
indicated on the markings water.
on the labels.
Never open the cover. Protect the power cable, Unplug the unit from the
Avoid small metal objects avoid high pressures and wall outlet when you do not
from falling into the unit, do not step on it. Do not use the unit for a prolonged
such as needles, hairpins, pull the cable or bend the period.
coins etc.. cable.
2
Maintenance
• Make sure the discs are always clean before playing it on the Hifi
system. If it is dirty, clean it with a cleaning cloth.
• Wipe the disc from the centre out, in a straight line.
• Do not expose the player, batteries or discs to humidity, rain, sand
or excessive heat (caused by heating equipment or direct sunlight)
• Do not use solvents such as benzene, thinner, commercially
available cleaners, or anti-static spray intended for colour discs.
• The lens may cloud over when the player is suddenly moved from
cold to warm surroundings, making it impossible to play a disc.
• Leave the device in a warm environment until the moisture
evaporates.
3
Contents
Setting up………………………………………………………5
The panel and the rear panel features………………………6
Remote control……………………………………………….7
Listening to CDs ………………………………….…………8
Listening to music from your external device ………………9
Listening to the radio………………………………………….9
Using a USB ………………………………….………………10
Blueooth Operating Instructions………………………………11
Troubleshooting………………………………………………. 13
Specifications………………………………………………….14
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for
such purposes.
Be responsible
Respect copyrights
4
Setting up
1. Connection of the front speakers
• Connect the speaker cables to the front speaker terminals.
• Connect the black end of each wire to the terminals marked-
(minus) and the other end to the terminals \ marked + (plus)
2. Stretch the FM aerial
• The reception will be its best when the end of the aerial is
stretched to be in a straight line and horizontal.
3. Connection of Audio output
• Connect the Audio output via AV cable with external amplifier
or speakers.
NOTES:
• If your TV screen loses colours or turn to B/W, move the speakers
away so that the distance between, is at least 30cm from the TV.
Be careful of the followin
g
Be careful and make sure children do not
p
ut their hands or an
y
ob
j
ects into the S
p
eaker duct.
5
• Be sure to match the speakers cable to the appropriate terminal on the
component: "R" to "R" and "L" to "L". if the cables are reversed, the sound
will be distorted and will lack of base.
The panel and the rear panel features
10.NEXT 11.USB JACK 12.SPECTRUM DISPLAY
1. FM ANT IN 2.AUDIO OUTPUT 3.LINE INPUT
4.ACPOWERCORD 5. SPEAKER OUTPUT 6. SPEAKER
6
1.OPEN/CLOSE 2.STOP 3.STANDBY
4.SOURCE 5.PREV 6.EARPHONE JACK
7. LED DISPLAY 8. PLAY/PAUSE 9.VOLUME+/-
Remote Control
MUTE
STANDBY STANDBY on /off
CD/USB
SOURCE Select the source between CD/ LINE IN / FM/ BT
SEARCH
REPEAT
LED MODE
RANDOM Playback the tracks randomly
STOP/■
Stop playback.
/CH+
/CH-
/FF-
/FF+
Start or pause playback.
Numerical keys to select directly a track.
MEMORY Store a radio preset station
VOLUME Adjust the volume level
DSP
FUNCTION Adjust treble and bass levels
PROG
Loudness Enhance Bass sound
7
0…10+
number key
Select different EQ modes for different sound effects.
Program music tracks and playback to your desired
order
Select the previous track or station.
Rewind or fast forward.
Select the next track or radio station
Open or close led light on the led display(Spectrum)
Temporarily turns off the volume. Press the button once
again to return to resume the volume
Press this button to repeat a track or to repeat all the tracks
Press this button to switch between CD and USB modes.
Press this button to automatically search for radio
stations
Listening to CD’s
Your Micro Hifi system is compatible with the following audio formats: CD,
MP3, WMA.
1. Open the disc tray
2. Insert the CD: label facing up
Searching for a section within a CD
Skipping to another track (files)
Press once on the unit or on the remote control.
Creating your own playlist
8
5. Start the CD playback.
OPEN/CLOSE
OPEN/CLOSE
4. Select the CD function
Hold on the unit or on the remote control during
playback and release it at the point you want to listen to.
6. Stop CD playback
ON UNIT
3. Close the disc tray
SOURCE
ON REMOTE
You can program up to 20 tracks on a CD or MP3.
1 Insert a CD or MP3 and wait until the unit reads out.
2 Press “PROG” button on the remote control when in STOP mode.
3 Press on the unit or on the remote control to select a
track. Repeat the process 2 and 3 to continue with the programing of your
playlist.
4 Press on the unit or on the remote control to play the programmed
music files.
Listening to your tracks (files) repeatedly or randomly
About MP3/WMA
MP3/WMA Disc compatibility with this unit is limited as follows
Listening to music from an external device
The unit can be used to play music from many types of external devices
ON REMOTE
2.Select the LINE IN function
Listening to the radio
Make sure the FM aerial is connected.
1. Select FM.
2. Select the radio station
3. Auto search radio station
9
SEARCH
SOURCE
ON UNIT
1.Connect the external device(such as
TV) via LINE IN connector of the unit.
If your TV only has one output for
Audio (MONO), connect it with the left
(White) audio jack of the unit.
ON UNIT
CH-/CH+/FF-/FF+
SOURCE
ON REMOTE
1. Press "RANDOM" on your remote control. "RAN" will appear on
the LCD display".
2. The tracks will start to play randomly.
To return to normal playback, simply press the "RANDOM" button
on the remote control. "RAN" will dissapear from the LCD display.
Sampling Frequency: 32-48(MP3/WMA)
Bit rate: 32-320kbps (MP3), 40-320kbps (WMA)
Do not use special characters such as / :*?<> etc.
If the total number of files on the disc is more than 1000, it will only show up
to the number 999.
Automatic Channel Search and Channel Save
Using a USB
1.Connect the USB device to the
USB port of the unit.
2. Select the USB function
3. Select a file you want to play
4. Start your media playing.
5. To stop, press
6. Before disconnecting the USB device,
change to any other function.
10
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the micro system.
SOURCE
or number key
CD/USB
1. Press the "SOURCE" button to select "Tuner" mode
2. Press the "SEARCH" button on the remote control to begin the automatic
channel search.
3. The preset stations will be saved automatically in the order of search. A
maximum of 40 presets can be stored.
1- Press the "SOURCE" button to select "Tuner" Mode.
2-To search for a desired station, press and hold FF / FF + on the remote
control for more than 0.5 seconds.
3-To organize and store the station in the order you want , press the
"MEMORY " button on the remote control ( The display flashes ) with "CH + /
CH-, select the position ( CH01 , CH02 ..) and the press the "MEMORY "
button to save it.
Compatible USB Devices
• MP3 player: Flash type MP3 player.
• USB Flash Drive: Devices that support USB2.0 or USB 1.1.
Restrictions
• The USB function may not work as not all types are 100% compatible.
• Devices, which require additional program installation when you have
connected it to a computer, are not supported by this unit
• To prevent data loss, back up all data on your computer.
Bluetooth Operating Instructions
11
• Do not extract the USB device while it is being used. You may lose all
the data stored on it.
• NTFS file system is not supported.(Only FAT(16/32) file system is
supported)
• If you use a USB extension cable or USB hub, the USB device might
not be recognized.
• When using a large capacity USB, the unit may take longer to read the USB.
*After activating the Bluetooth function, the blue indicator lamp will quickly
flash for three times and a “beep” sound will be heard. The red indicator
lamp
flashes and the unit enters the Bluetooth mode to search for a Bluetooth
device which was previously connected. If the unit locates any device which
was previously connected to the unit, it will be automatically connect to this
last device.
• External HDD’s, locked devices or hard type USB devices are not
supported
• The unit will not support the USB drive if there are more than 1000 files
on it.
Press the "SOURCE" button to switch the audio mode to Bluetooth “BT”
Make sure there is no interference with other electrical product nearby.
Remarks:
12
* If it is difficult to connect and pair the laptop, call the company's
after-sales service department.
*When the unit begins playback, the red and blue indicator lamps will
flash at the same time;
*Once the connection is successfully established, the blue indicator lamp
will flash slowly and the “beep” prompt will be heard once again.
*If no such device is found, then the unit will automatically enter into the
pairing status. At this moment, the red and blue indicator lamps will flash
alternately.
*When in pairing mode, search for SY-8045BT on the Bluetooth device
(Tablet, Mobile, or any other Bluetooth device) you wish to connect.
*Once you have found the device, press on it to connect your device to the
Micro Hifi system SY-8045BT.
* The Bluetooth transmission ranges from 8 to 10m, providing there are no
obstacles that block the signals.
* Since the Bluetooth versions for laptops are considerable, the
connection methods vary a lot. If the laptop is unable to connect during
the first use, the latest Bluetooth driver can be installed for the laptop.
When the playback is paused or stopped, the blue indicator lamp will
flash slowly.
* If the Bluetooth version of the cell phone is too old, the cell phone will
indicate the user to enter the password “0000” when it connects
for the first time.
* Sometimes when the cell phone Bluetooth connects with several
Bluetooth devices, some unpredictable faults may occur due to too
much data stored in the cell phone. At this time, clear the Bluetooth
devices stored in the cell phone or restart the cell phone to attempt
another connection.
* Once your mobile is connected via Bluetooth to the Micro Hifi system, when
you receive a call, the ringtone will be heard throught the speakers. To pick
up the call and speak, simply pick up your mobile.
Troubleshooting
General
Plug in the power cord.
CD
Insert a playable disc
The disc is dirty Clean the disc
RADIO
Remote control
13
CauseSymptom
The power cord is not
Plugged in.
Correction
No sound
Press SOURCE and check
the selected function.
Check whether
electricity failed.
No power
Connect the antenna
securely.
Check the condition by
operating other electronic
devices.
An unplayable disc is
inserted
The unit does not
start playback.
The antenna is badly
positioned or not
connected properly
Radio stations
cannot be tuned
Operate the remote control
within 23ft (7M).
Check whether you
selected the right function.
Replace the battery with
new one.
The remote control
does not work
properly.
The remote control is too
far from the unit .
There is an obstacle in the
path of the remote control
and the unit.
The battery in the remote
control is exhausted.
Remove the obstacle.
Specifications
Basic S
p
ecifications
Technical specifications:
Bluetooth Specifications
14
CD/MP3/USB/Bluetooth Micro Hifi system
Enjoy Wireless music playback from mobile or tablet devices
PLL FM tuner, 40 pre-set memories
2.0 USB port. (Max Capacity: 32GB)
Audio formats supported: CD, CD/R, CD-RW, MP3, WMA
Program up to 20 tracks on CD
Spectrum light effects on front panel
Bass enhancement effect “Loudness”
LED display backlight
Earphone output / Aux in feature
Power output: 60W. PMPO
Remote control
Dimension: Main Unit: 150x198x205mm. (Width/Depth/Height)
Speakers: 130x145x205mm. (Width/Depth/Height)
Weight: 4,4 Kg.
Bluetooth Version: V2.1+EDR ClassII
BT Frequency: 2.4Ghz (2.4Ghz-2.4835Ghz)
Bluetooth supported Profile: AVRCP, A2DP
BT Range: 10 meters
Signal to noise ratio: >80dB
Frequency response: 20Hz~20 KHz (+/- 3dB)
FM Frequency range: 87.5~108 MHz
Standby consumption: ≤2.5W
USB port output: 5V. 500mA.
Voltage: 110~240V. 50/60Hz.
Declaration of Conformity
15
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
R&TTE Directive: 1999/5/EC
ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: CD Micro Hifi System
Sytech® SY-8045BT complies with the following directives:
/