Rothenberger 1500000922 User manual

ROLeak Aqua Plus

www.rothenberger.com

DE Bedienungsanleitung

EN Instructions for use

FR Instruction d’utilisation

ES Instrucciones de uso

IT Istruzioni d’uso

NL Gebruiksaanwijzing

PT Instruções de serviço

DA Brugsanvisning

SV Bruksanvisning

NO Bruksanvisning

FI Käyttöohje

PL Instrukcja obslugi

CZ Návodkpoužívání

TR Kullanim kilavuzu

HU Kezelési útmutató

EL Οδηγίεςχρήσεως

RU Инструкцияпоиспользованию

Intro

EU-KONFORMITÄTSERKLÄRUNG

Wir erklären in alleiniger Verantwortung, dass dieses

Produkt mit den angegebenen Normen und Richtlinien

übereinstimmt.

EU-DECLARATION OF CONFORMITY

We declare on our sole accountability that this product

conforms to the standards and guidelines stated.

DECLARATION EU DE CONFORMITÉ

Nous déclarons sous notre propre responsabilité que ce

produit est conforme aux normes et directives indiquées.

DECLARACION DE CONFORMIDAD EU

Declaramos, bajo nuestra responsabilidad exclusiva, que

este producto cumple con las normas y directivas

mencionadas.

DICHARAZIONE DI CONFORMITÀ EU

Dichiariamo su nostra unica responsabilità, che questo

prodotto è conforme alle norme ed alle direttive indicate.

EU-KONFORMITEITSVERKLARING

Wij verklaren in eigen verantwoordelijkheid dat dit

product overeenstemt met de van toepassing zijnde

normen en richtlijnen.

DECLARAÇÃO DE CONFORMIDADE EU

Declaramos, sob responsabilidade exclusiva, que o

presente produto está conforme com as Normas e

Directivas indicadas.

EU-KONFORMITETSERKLÆRING

Vi erklærer som eneansvarlig, at dette produkt er i

overensstemmelse med anførte standarder,

retningslinjer og direktiver.

EU-FÖRSÄKRAN

Vi försäkrar på eget ansvar att denna produkt uppfyller

de angivna normerna och riktlinjerna.

EU-SAMSVARSERKLÆRING

Vi erklærer på eget ansvar at dette produktet stemmer

overens med de følgende normer eller normative

dokumenter.

TODISTUS EU-STANDARDINMUKAISUUDESTA

Todistamme täten ja vastaamme yksin siitä, että tämä

tuote on allalueteltujen standardien ja

standardomisasiakirjojen vaatimusten mukainen.

DEKLARACJA ZGODNOŚCI EU

Oświadczamy z pełną odpowiedzialnością, że produkt

ten odpowiada wymaganiom następujących norm i

dokumentów normatywnych.

EU-PROHLÁŠENÍ O SHODÌ

Se vší zodpovìdností prohlašujeme, že tento výrobek

odpovídá následujícím normám a normativním

dokumentům.

EU UYGUNLUK BEYANI

Tek sorumlu olarak bu ürünün yönetmelik hükümleri

uyarýnca aþaðýdaki normlara ve norm dokümanlarýna

uygunluðunu beyan ederiz.

EU-AZONOSSÁGI NYILATKOZAT

Teljes felelősségünk tudatában kijelentjük, hogy jelen

termék megfelel a következő szabványoknak vagy

szabványossági dokumentumoknak.

ΔΗΛΩΣΗ ΠΙΣΤΟΤΗΤΑΣ ΕU

Δήλώνουμε με αποκλειστική μας ευθύvη, ότι αυτό το

προϊόv αvταποκρίvεται στα ακόλουθα πρότυπα ή

έγγραφα τυποποίησης.

ДЕКЛАРАЦИЯ О СООТВЕТСТВИИ СТАНДАРТАМ

EU.

Мы заявляем что этот продукт соответствует

следующим стандартам.

2014/53/EU, 2014/35 EU, 2011/65/EU,

ETSI EN 300220-1, EN 60950-1,

EN 50581

Herstellerunterschrift

Manufacturer/ authorized representative signature

ppa. Thorsten Bühl Kelkheim, 09.11.2016

Director Corporate Technology

Technische Unterlagen bei/ Technical file at:

ROTHENBERGER Werkzeuge GmbH

Spessartstrasse 2-4

D-65779 Kelkheim/Germany

Page is loading ...

ENGLISH 9

Contents

Page

1 Safety Notes ........................................................................................................................ 10

1.1 General Power Tool Safety Warnings ............................................................................... 10

1.2 Safety Instructions ............................................................................................................ 11

2 Technical data ..................................................................................................................... 12

3 Scope of delivery ................................................................................................................ 12

4 Function of the unit ............................................................................................................ 12

4.1 Structure ........................................................................................................................... 13

4.2 Feeler rod ......................................................................................................................... 13

4.3 Batteries ........................................................................................................................... 14

4.4 Headphones ..................................................................................................................... 14

5 Performing a measurement ................................................................................................ 14

5.1 Perform the measurement ................................................................................................ 14

5.2 Select the frequency filter ................................................................................................ 15

6 Customer service ................................................................................................................ 15

7 Disposal ............................................................................................................................... 15

Markings in this document:

Danger!

This sign warns against the danger of personal injuries.

Caution!

This sign warns against the danger of property damage and damage to the envi-

ronment.

Call for action

10 ENGLISH

1 Safety Notes

1.1 General Power Tool Safety Warnings

WARNING!

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious in-

jury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your electrically-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs with (grounded) power tools. Unmodified plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with grounded surfaces such as pipes, radiators, ranges and re-

frigerators. There is an increased risk of electric shock if your body is grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will in-

crease the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors only, use an extension cords suitable for out-

door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current de-

vice (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, al-

cohol or medication. A momentary lack of attention while operating power tools may result

in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropri-

ate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connect-

ing to power source and/or battery pack, picking up or carrying the tool. Carrying

power tools with your finger on the switch or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a

key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

ENGLISH 11

g) If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of these devices can reduce dust re-

lated hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The cor-

rect power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamil-

iar with the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tools operation. If dam-

aged, have the power tool repaired before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these instruc-

tions, taking into account the working conditions and the work to be performed. Use

of the power tool for operations different from those intended could result in a hazardous sit-

uation.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suita-

ble for one type of battery pack may create a risk of fire when used with another battery

pack.

b)

WARNING! Use power tools only with specifically designated battery packs

and respectively battery types. Use of any other battery packs may create a risk

of explosions, injury and fire.

c) When battery pack is not in use, keep it away from other metal objects like paper

clips, coins, keys, nails, screws, or other small metal objects that can make a connec-

tion from one terminal to another. Shorting the battery terminals together may cause

burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation or burns.

6) Service

Have your power tool serviced by a qualified repair person using only identical re-

placement parts. This will ensure that the safety of the power tool is maintained.

1.2 Safety Instructions

This manual contains elementary notes on putting into operation and operation of the device.

One must therefore ensure that this manual is made available at all times to the authorised and

trained operating personnel. The operating personnel should read through the manual very care-

fully. The manufacturer cannot be held liable for any case of injury to persons and/or damage to

goods which arises due to non-observance of the safety instructions contained in this manual.

Country-specific standards and regulations should be observed!

Check the scope of delivery immediately after receipt of the device for completeness and any

external damage. Devices which are clearly damaged must never be put into operation.

Please contact your sales partner immediately if there is anything missing or damaged.

Repair work and maintenance work may only be undertaken by an authorised service partner.

12 ENGLISH

The measurement system is provided for operation in an industrial setting. Interference may oc-

cur with other devices (for example radio, television) in a domestic setting.

The interference associated with the lines is within limit value curve B (domestic setting), while

the radiation emitted is within limit value curve A (industrial setting) according to EN 55011.

Once the distance at the foreseen place of use (in an industrial setting) is great enough from any

residential area then it is unlikely that there will be any interference experienced by devices in

the residential area.

Attention! Always ensure that the headphone volume is not set too high. Excessively

high volume settings on headphones can damage the user’s hearing.

The device is sensitive to impacts. Do not let it drop on the floor or suffer any other

kind of shock.

Only put the device into operation when it is in a technically perfect condition.

The protection level/safety class specified for the device concerning moisture and dust can only

be achieved when the appropriate plug has been placed in all sockets, or the sockets are cov-

ered by means of the appropriate protective caps.

2 Technical data

The device is specified by the following technical parameters:

Parameter

Value

Sensor ...................................

internal piezoceramic sensor

(sound recording over a tracing tip or other measuring head)

Display...................................

102 x 64 points; transflective

Frequency filter ......................

3 stages are selectable:

0 to 540 Hz / 540 to 4000 Hz / 0 to 4000 Hz

Memory .................................

the last volume level

Battery ...................................

2 x 1,5 V (AA)

Operating time .......................

~ 50 h

Operating temperature ...........

-10 °C to +50 °C

Dimensions (L x W x H) .........

205 x 89 x 85 mm

Weight ...................................

300 g

Protection type .......................

IP 41

3 Scope of delivery

The scope of delivery includes the following parts:

• wireless headphones

• feeler rod

• magnet measuring head

• extension bar (2 pieces)

• a case

4 Function of the unit

The ROLEAK Aqua Plus is a simple to use, hand-held device for acoustic leak detection in pipe-

line systems.

The noises occurring in the pipework are recorded over the tracing tip, amplified and reproduced

over the headphones. The measured noise level is also shown on the device display screen at

the same time.

The noise can be filtered if necessary. To do this the user has the option of selecting one of

three frequency filter settings during the measurement procedure.

The tracing tip can be detached from the device. Extensions can then be inserted or other

measuring heads used.

ENGLISH 13

4.1 Structure

The picture shows the display and operating area of the device.

Display

One can find the following information on the screen:

headphone OFF

frequency filter

being used

current volume level

The currently measured volume level is displayed as a dimensionless numerical value lying be-

tween 1 - 99.

The bar shown also reflects the current volume level. The arrow below the bar marks the last

measured value stored.

I/O button

pressing on it for a longer period of time = switches the device On / Off

pressing on it for a shorter period of time = starts/ stops the current measurement procedure; the

headphones are switched to activated / muted at the same time

Filter button

Selection of a frequency setting in 3 stages (LOW / HIGH / ALL)

4.2 Feeler rod

The tracing tip can be detached from the device. You can unscrew it (a right-hand thread) if

necessary and exchange it for another measuring head or mount the extension bar provided.

14 ENGLISH

4.3 Batteries

The device is delivered with the following batteries: 2 x 1,5 V AA LR6

A NiMH accumulator of the same size can be used as an alternative.

A flashing battery symbol appears at the top in the display for a low battery level.

Empty batteries can be replaced. To do this undo the screw on the underside of the device and

remove the cover. Ensure that you achieve the correct polarity when inserting the new batteries.

Then attach the cover again and tighten the screw carefully. Do not overtighten!

Attention! Always act carefully and without using force in order not to damage

components.

4.4 Headphones

The device is delivered with the wireless headphones: These have the following control ele-

ments:

ON / OFF On/Off switch

TUNE Frequency selection knobs

VOL Loudness knobs

The wireless headphones are driven by the following batteries: 2 x 1,5 V AAA LR03

For a low battery level the radio contact between the device and headphones breaks off.

To change the batteries, turn the ear pads for the left earpiece counterclockwise over a light re-

sistance and remove it. Ensure that you achieve the correct polarity when inserting the new bat-

teries.

5 Performing a measurement

5.1 Perform the measurement

We recommend the following procedure to perform a measurement:

• switch on the headphones, but do not put them on yet

• set the headphones loudness to “quiet“ (set the “VOL“ control slightly above the minimum

setting)

• put on the headphones

• switch on device (I/O button )

• set the headphones to the correct radio frequency (“TUNE“ control)

• Switch the headphones to “mute“ (I/O button);

• the symbol appears on the screen

• Set the frequency filter being used to “ALL“ (filter button )

• Perform a measurement once on the I/O button.

• The headphones are activated and the recorded noise is reproduced. The level of noise is

displayed on the screen.

• Alter the frequency filter being used if necessary (filter button)

• Press the I/O button before every implementation of the device!

• The currently running measurement is ended by this and the headphones are switched to

“mute“. An arrow on the bar indicator in the display marks the last measured value. The

screen display is frozen until the next measurement.

ENGLISH 15

5.2 Select the frequency filter

By pressing the filter button one can change between the following three frequency filter

stages during the measurement:

Description

Measuring range

Explanation

LO

0 to 540 Hz

high frequencies are hidden;

(use as a ground microphone)

HI

540 to 4000 Hz

low frequencies are hidden;

(use as a tracing bar directly on the line / fixing device)

ALL

0 to 4000 Hz

Broadband measurement without a filter

6 Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-

line) and replacement parts and service are also available through these same service locations.

Order your accessories and spare parts from your specialist retailer or using our service-after-

sales hotline:

Phone: + 49 (0) 61 95 / 800 – 8200

Fax: + 49 (0) 61 95 / 800 – 7491

Email: service@rothenberger.com

www.rothenberger.com

7 Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose

registered and certified recycling companies are available. For an environmental friendly dispos-

al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal

authority.

Old batteries can be taken to your specialist dealer who will dispose of them in conformity with

environmental regulations.

For EU countries only:

Do not dispose of electric tools with domestic waste. In accordance with European

Directive 2012/19/EC on waste electrical and electronic equipment and its implementa-

tion as national law, electric tools that are no longer serviceable must be collected

separately and utilised for environmentally compatible recycling.

Page is loading ...

1300002050-i1/F&E

www.rothenberger.com

ROTHENBERGER Worldwide

Austria

Belgium

Brazil

Bulgaria

China

Czech

Republic

Denmark

France

Germany

Hungary

India

Greece

ROTHENBERGER Italiana s.r.l.

Via G. Reiss Romoli 17-19 • I-20019 Settimo Milanese

Tel. + 39 02 / 33 50 601 • Fax + 39 02 / 33 50 0151

info@rothenberger.it • www.rothenberger.it

ROTHENBERGER Nederland bv

Postbus 45 • NL-5120 AA Rijen

Tel. + 31 1 61 / 29 35 79 • Fax + 31 1 61 / 29 39 08

info@rothenberger.nl • www.rothenberger.nl

ROTHENBERGER Polska Sp.z.o.o.

Ul. Annopol 4A • Budynek C • PL-03-236 Warszawa

Tel. + 48 22 / 2 13 59 00 • Fax + 48 22 / 2 13 59 01

biuro@rothenberger.pl • www.rothenberger.pl

ROTHENBERGER Russia

Avtosavodskaya str. 25

115280 Moscow, Russia

Tel. + 7 495 / 792 59 44 • Fax + 7 495 / 792 59 46

info@rothenberger.ru • www.rothenberger.ru

ROTHENBERGER-TOOLS SA (PTY) Ltd.

P.O. Box 4360 • Edenvale 1610

165 Vanderbijl Street, Meadowdale Germiston

Gauteng (Johannesburg), South Africa

Tel. + 27 11 / 3 72 96 31 • Fax + 27 11 / 3 72 96 32

info@rothenberger.co.za • www.rothenberger.co.za

ROTHENBERGER S.A.

Ctra. Durango-Elorrio, Km 2 • E-48220 Abadiano

(Vizcaya)

(P.O. Box) 117 • E-48200 Durango (Vizcaya)

Tel. + 34 94 / 6 21 01 00 • Fax + 34 94 / 6 21 01 31

export@rothenberger.es • www.rothenberger.es

ROTHENBERGER Sweden AB

Hemvärnsgatan 22 • S- 171 54 Solna, Sverige

Tel. + 46 8 / 54 60 23 00 • Fax + 46 8 / 54 60 23 01

roswe@rothenberger.se • www.rothenberger.se

ROTHENBERGER (Schweiz) AG

Herostr. 9 • CH-8048 Zürich

Tel. + 41 44 / 435 30 30 • Fax + 41 44 / 401 06 08

[email protected]

ROTHENBERGER TÜRKIYE

ROTHENBERGER Center, Barbaros Bulvarı No:9

TR-34775 Şerifali / Ümraniye-Istanbul

Tel. + 90 / 216 449 24 85 • Fax + 90 / 216 449 24 87

rothenberger@rothenberger.com.tr

www.rothenberger.com.tr

ROTHENBERGER Middle East FZCO

PO Box 261190 • Jebel Ali Free Zone

Dubai, United Arab Emirates

Tel. + 971 / 48 83 97 77 • Fax + 971 / 48 83 97 57

ofce@rothenberger.ae

ROTHENBERGER EQUIPMENT TRADING &

SERVICES LLC

PO Box 91208 • Mussafah Industrial Area

Abu Dhabi, United Arab Emirates

Tel. + 971 / 25 50 01 54 • + 971 / 25 50 01 53

uaesales@rothenberger.ae

ROTHENBERGER UK Limited

2, Kingsthorne Park, Henson Way,

Kettering • GB-Northants NN16 8PX

Tel. + 44 15 36 / 31 03 00 • Fax + 44 15 36 / 31 06 00

info@rothenberger.co.uk

ROTHENBERGER USA LLC

7130 Clinton Road • Loves Park, IL 61111, USA

Tel. +1 / 80 05 45 76 98 • Fax + 1 / 81 56 33 08 79

[email protected]

www.rothenberger-usa.com

Italy

Nether-

lands

Poland

Russia

South

Africa

Spain

Switzerland

Turkey

UAE

UK

USA

ROTHENBERGER Werkzeuge GmbH

Industriestraße 7

D- 65779 Kelkheim / Germany

Telefon + 49 (0) 61 95 / 800 - 0

Fax + 49 (0) 6195 / 800 - 3500

info@rothenberger.com

ROTHENBERGER Australia Pty. Ltd.

Unit 6 • 13 Hoyle Avenue • Castle Hill • N.S.W. 2154

Tel. + 61 2 / 98 99 75 77 • Fax + 61 2 / 98 99 76 77

rothenberger@rothenberger.com.au

www.rothenberger.com.au

ROTHENBERGER Werkzeuge- und Maschinen

Handelsgesellschaft m.b.H.

Gewerbeparkstraße 9 • A-5081 Anif

Tel. + 43 62 46 / 7 20 91-45 • Fax + 43 62 46 / 7 20 91-15

ofce@rothenberger.at • www.rothenberger.at

ROTHENBERGER Benelux bvba

Antwerpsesteenweg 59 • B-2630 Aartselaar

Tel. + 32 3 / 8 77 22 77 • Fax + 32 3 / 8 77 03 94

info@rothenberger.be • www.rothenberger.be

ROTHENBERGER do Brasil LTDA

Av. Fagundes de Oliveira, 538 - Galpão A4

09950-300 - Diadema / SP - Brazil

Tel. + 55 11 / 40 44- 4748 • Fax + 55 11 / 40 44- 5051

spacente@rothenberger.com.br • www.rothenberger.com.br

ROTHENBERGER Bulgaria GmbH

Boul. Sitnjakovo 79 • BG-1111 Soa

Tel. + 35 9 / 2 9 46 14 59 • Fax + 35 9 / 2 9 46 12 05

info@rothenberger.bg • www.rothenberger.bg

ROTHENBERGER Pipe Tool (Shanghai) Co., Ltd.

D-4, No.195 Qianpu Road,East New Area of Songjiang

Industrial Zone, Shanghai 201611, China

Tel. + 86 21 / 67 60 20 61 • + 86 21 / 67 60 20 67

Fax + 86 21 / 67 60 20 63 • ofce@rothenberger.cn

ROTHENBERGER CZ

Prumyslova 1306/7 • 102 00 Praha 10

Tel. +420 271 730 183 • Fax +420 267 310 187

prodej@rothenberger.cz • www.rothenberger.cz

ROTHENBERGER Scandinavia A/S

Smedevænget 8 • DK-9560 Hadsund

Tel. + 45 98 / 15 75 66 • Fax + 45 98 / 15 68 23

roscan@rothenberger.dk

ROTHENBERGER France S.A.

24, rue des Drapiers, BP 45033 • F-57071 Metz Cedex 3

Tel. + 33 3 / 87 74 92 92 • Fax + 33 3 / 87 74 94 03

info-fr@rothenberger.com • www.rothenberger.fr

ROTHENBERGER Deutschland GmbH

Industriestraße 7 • D-65779 Kelkheim/Germany

Tel. + 49 61 95 / 800 81 00 • Fax + 49 61 95 / 800 37 39

verkauf-deutschland@rothenberger.com

www.rothenberger.com

ROTHENBERGER Plastic Technologies GmbH

Lilienthalstraße 71- 87 • D-37235 Hessisch-Lichtenau

Tel. + 49 56 02 / 93 94-0 • Fax + 49 56 02 / 93 94 36

ROTHENBERGER Hellas S.A.

Agias Kyriakis 45 • 17564 Paleo Faliro • Greece

Tel. + 30 210 94 02 049 • +30 210 94 07 302 / 3

Fax + 30 210 / 94 07 322

[email protected] • www.rothenberger.com

ROTHENBERGER Hungary Kft.

Gubacsi út 26 • H-1097 Budapest

Tel. + 36 1 / 3 47- 50 40 • Fax + 36 1 / 3 47 - 50 59

info@rothenberger.hu • www.rothenberger.hu

ROTHENBERGER India Pvt. Ltd.

Plot No 17, Sector - 37, Pace city-I

Gurgaon, Haryana - 122 001, India

Tel. 91124- 4618900 • Fax 91124- 4019471

[email protected]

www.rothenberger.com

Australia

Sweden

Rothenberger 1500000922 User manual

This manual is also suitable for

Rothenberger 1500000922 User manual

in other languages

Related papers

Other documents