LG 42PG60D Owner's manual

Please read this manual carefully before operating

your TV.

Retain it for future reference.

Record model number and serial number of the TV.

Refer to the label on the back cover and quote this

information.

To your dealer when requiring service.

OWNER’S MANUAL

PLASMA TV MODELS

4422PPGG66

****

5500PPGG66

****

Trade Mark of the DVB Digital Video

Broadcasting Project (1991 to 1996)

IIDD NNuummbbeerr((ss))::

5277: 42PG60D 5293: 50PG60D

PLASMA TV

“ This product incorporates copy protection technology that is protected by U.S. and foreign patents,

including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of

Macrovision’s copy protection technology in the product must be authorized by Macrovision. Reverse

engineering or disassembly is prohibited. ”

Polishing Cloth

Polishing cloth for use on the

screen.

Lightly wipe any stains or fingerprints on

the surface of the TV with the polishing

cloth.

Do not use excessive force. This may

cause scratching or discolouration.

1

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the

dealer where you purchased the TV.

Owner's

Manual

Owner’s Manual

Batteries

OK

INPUT MODE

TV

D/A

DVD

EXIT

VOL PR

GUIDE

BACK

MENU

RATIO

I/II

VCR

POWER

123

456

789

0

Q.VIEW

LIST

INDEX

SLEEP

HOLD

REVEAL

?

SUBTITLE

TEXT

INPUT

BRIGHT

MUTE

TV/RADIO

UPDATE

SIMPLINK

INFO i

FAV

TIME

Remote Control

Power Cord

Cable management clip

(50PG6

**

)

Cable Holder

(42PG6

**

)

Protection Cover

When installing the wall-mounted unit, use the protection

cover for desk-type stand installation.

NOT USING THE DESK-TYPE STAND

4-Bolts for stand assembly

(Refer to p.6)

(Only 42PG6

**

)

x 4

A

Image shown may differ from your TV.

Ferrite Core

(This feature is not

available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Use of Ferrite Core (This feature is not available for all models.)

Install as close as possible to

the power plug.

2

CONTENTS

ACCESSORIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

PREPARATION

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 5

Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Please set it up carefully so the product

does not fall over . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Back Cover for Wire Arrangement . . . . . . . . . . . . . . 8

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . 9

Wall Mount: Horizontal Installation . . . . . . . . . . . . . 9

Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . 10

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . 11

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . . 18

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 19

PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

- Screen Setup for PC mode . . . . . . . . . . . . . . . 23

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions . . . . . . . . . . . . . . . . 27

Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Programme Selection . . . . . . . . . . . . . . . . . . . . . . . 30

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . 30

On-Screen Menus Selection and Adjustment . . . . 31

Auto Programme Tuning (In Digital Mode) . . . . . . 32

Manual Programme Tuning (In Digital Mode) . . . . 33

Programme Edit (In Digital Mode) . . . . . . . . . . . . . 34

5V Antenna Power(In Digital Mode Only) . . . . . . .36

Booster (In Digital Mode Only) . . . . . . . . . . . . . . . 37

Software Update (In Digital Mode Only) . . . . . . . 38

Diagnostics (In Digital Mode Only) . . . . . . . . . . . . 39

Auto Programme Tuning (In Analogue Mode) . . . . . 40

Manual Programme Tuning (In Analogue Mode)

. . . . . . . 41

Fine Tuning (In Analogue Mode) . . . . . . . . . . . . . . 42

Assigning a Station Name (In Analogue Mode)

. . . . . . 42

Programme Edit (In Analogue Mode)

. . . . . . . . . . . . . 43

Selecting the Programme Table . . . . . . . . . . . . . . 45

Input Source Selection . . . . . . . . . . . . . . . . . . . . . 46

SIMPLINK Function . . . . . . . . . . . . . . . . . . . . . . . . 47

EPG (ELECTRONIC PROGRAMME GUIDE)

(IN DIGITAL MODE)

Switch On/Off EPG . . . . . . . . . . . . . . . . . . . . . . . . . 49

Select Programme . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Button Function in NOW/NEXT Guide Mode . . . . . 50

Button Function in 8 Day Guide Mode . . . . . . . . . . 50

Button Function in Date Change Mode . . . . . . . . . . 50

Button Function in Extended Description Box . . . . . 51

Button Function in Remind Mode . . . . . . . . . . . . . . 51

Button Function in Schedule List Mode . . . . . . . . . . 51

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . 52

Preset Picture Settings

- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . . . . . . . . 54

-

Auto Colour Tone Control (Warm/Medium/Cool)

. . . .55

Manual Picture Adjustment

- Picture Mode-User Option . . . . . . . . . . . . . . . . . . . . 56

- Colour Tone - User Option . . . . . . . . . . . . . . . . . . . . .57

XD - Picture Improvement Technology . . . . . . . . . . . . . . 58

XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Advanced - Black(Darkness) Level . . . . . . . . . . . . . . . . . . 61

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Image Sticking Minimization(ISM) Method . . . . . . . . . . . 63

Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 64

3

CONTENTS

SOUND & LANGUAGE CONTROL

Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 65

Preset Sound Settings - Sound Mode . . . . . . . . . . 66

Sound Setting Adjustment - User Mode . . . . . . . . . . 67

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . 69

Selecting Digital Audio . . . . . . . . . . . . . . . . . . . . . . 70

I/II

-

Stereo/Dual Reception (In Analogue Mode Only)

. 71

-

NICAM Reception (In Analogue Mode Only) . . . . . . .

72

- Speaker Sound Output Selection . . . . . . . . . . 72

Language Selection

(In Digital Mode Only) . . . . . .73

TIME SETTING

Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . 75

Auto Shut-Off Setting . . . . . . . . . . . . . . . . . . . . . 76

Time Zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . 77

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . 77

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . 78

Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

TELETEXT

Switch On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Special Teletext Functions . . . . . . . . . . . . . . . . . . . . 81

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Product Specifications . . . . . . . . . . . . . . . . . . . . . 85

Programming the Remote Control . . . . . . . . . . . . 86

Programming Code . . . . . . . . . . . . . . . . . . . . . . . 86

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

External Control Device Setup . . . . . . . . . . . . . . 90

PR

VOL

-+

OK

MENU

INPUT

4

PREPARATION

FRONT PANEL CONTROLS

PREPARATION

A

Image shown may differ from your TV.

A

If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.

PROGRAMMEVOLUMEMENU OKINPUT

PR

VOL

-+

OK

MENU

INPUT

Remote Control Sensor

POWER

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the TV is

switched on.

PR

VOL

- +

OK

MENU

INPUT

Power Cord Socket

This TV operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

AUDIO IN (RGB/DVI)

Connect the audio from a PC.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

Component Input

Connect a component video/audio device to

these jacks.

HDMI IN 1/2/3/4

Connect a HDMI signal to HDMI IN or DVI (VIDEO)

signal to HDMI/DVI port with DVI to HDMI cable.

RGB IN (PC)

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Antenna Input

Connect RF antenna to this jack.

AV (Audio/Video) IN

Connect audio/video output from an external

device to these jacks.

S-VIDEO

Connect S-Video out from an S-VIDEO device.

5

BACK PANEL INFORMATION

A

Image shown may differ from your TV.

1

2

3

4

5

7

6

8

9

1

VIDEO

1 2

AUDIO

COMPONENT IN

ANTENNA IN

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

5

2 43

8

7

6

5

PREPARATION

9

6

PREPARATION

STAND INSTALLATION

(only 42PG6

**

)

1

2

3

Carefully place the TV screen side down on a

cushioned surface to protect the screen from

damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the

back of the TV.

Swivel Stand

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20 degrees

to suit your viewing position.

PREPARATION

A

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the

product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt

can deviate from abrasion of the tightening part of the bolt.

7

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT

FALL OVER.

■

You should purchase necessary components to fix the TV to the wall on the market.

■

Position the TV close to the wall to avoid the possibility of it falling when pushed.

■

The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possi-

bility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will

also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE

!

G

When moving the TV undo the cords first.

G

Use a platform or cabinet strong and large enough to support the size and weight of the TV.

G

To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen these bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted

on the wall.

3

Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall

and the TV.

2

1

2

1

PREPARATION

8

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Connect the cables as necessary.

To connect additional equipment, see the

EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp

section.

1

Install the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as shown.

2

Hold the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

with both hands and pull it upward.

NOTE

!

GG

Do not use the CABLE MANAGEMENT CLIP to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

HHooww ttoo rreemmoovvee tthhee ccaabbllee mmaannaaggeemmeenntt cclliipp

■

Image shown may differ from your TV.

CABLE MANAGEMENT CLIP

Connect the cables as necessary.

To connect additional equipment, see the

EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp

section.

1

Install the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as shown.

2

CABLE MANAGEMENT CLIP

42PG6

**

50PG6

**

50PG6

**

42PG6

**

Separate CABLE

MANAGEMENT from

TV by pressing two

latches.

Fix the

CCaabbllee HHoollddeerr

as

shown and bundle the

cables.

For the 42PG6**

model, press the

center of the

CABLE MANAGE-

MENT CLIP and

then lift up it.

PREPARATION

9

DESKTOP PEDESTAL INSTALLATION

PR

VOL

-+

OK

MENU

INPUT

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

EARTHING

Ensure that you connect the earth wire to prevent possible

electric shock. Do not try to earth the TV by connecting it

to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit

breaker

■

The TV can be installed in various ways such as on a wall or on a desktop etc.

■

The TV is designed to be mounted horizontally.

4 inches

4 inches 4 inches 4 inches

WALL MOUNT: HORIZONTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use

a wall mounting bracket of LG brand when mounting the TV to a wall.

4 inches

4 inches 4 inches

4 inches

PREPARATION

ANTENNA IN

10

PREPARATION

ANTENNA IN

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Outdoor

Antenna

(VHF, UHF)

Wall

Antenna

Socket

RF Coaxial Wire (75 ohm)

ANTENNA CONNECTION

Antenna

UHF

Signal

Amplifier

VHF

■

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the

antenna as shown above.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

- 5V antenna power works In Digital

mode only. (Refer to p. 36)

PREPARATION

11

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

■

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive

Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

VIDEO

12

AUDIO

COMPONENT IN

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

Connecting with a component cable

Connect the video outputs

(

Y, P

B, PR

)

of the digital set

top box to the

CCOOMMPPOONNEENNTT IINN11 VVIIDDEEOO

jacks on

the TV.

Connect the audio output of the digital set-top box to

the

CCOOMMPPOONNEENNTT IINN11 AAUUDDIIOO

jacks on the TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

Select Component1 input source using the

IINNPPUUTT

button on the remote control.

If connected to

CCOOMMPPOONNEENNTT IINN22

, select

Component2 input source.

2

3

4

1

Signal

480i/576i

480p/576p

720p/1080i

108 0 p

Component

Yes

No

HDMI1/2/3/4

No

Yes

1 2

■

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

EXTERNAL EQUIPMENT SETUP

12

EXTERNAL EQUIPMENT SETUP

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

DIGITAL

AUDIO OUT

(RGB/DVI)

HDMI-DTV OUTPUT

Connecting a set-top box with an HDMI cable

Connect the digital set-top box to

HHDDMMII IINN 22

jack on

the TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

Select HDMI2 input source using the

IINNPPUUTT

button

on the remote control.

If connected to

HHDDMMII IINN 33

(or

HHDDMMII IINN 44

) jack,

select HDMI3 (or HDMI4) input source.

2

3

1

AUDIO IN

(RGB/DVI)

VIDEO AUDIO

COMPONE

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

1

2

Connect the digital set-top box to

HHDDMMII//DDVVII IINN 11

jack on the TV.

Connect the audio output of the digital set-top box to

the

AAUUDDIIOO IINN ((RRGGBB//DDVVII))

jack on the TV.

Turn on the digital set-top box.

(

Refer to the owner’s

manual for the digital set-top box.

)

Select HDMI1 input source using the

IINNPPUUTT

button

on the remote control.

2

3

4

1

Connecting with a HDMI to DVI cable

EXTERNAL EQUIPMENT SETUP

13

DVD SETUP

Connecting with a component cable

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

Y

P

B

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

Connect the video outputs

(

Y, PB, PR

)

of the DVD to the

CCOOMMPPOONNEENNTT IINN11 VVIIDDEEOO

jacks on the TV.

Connect the audio outputs of the DVD to the

CCOOMMPPOONNEENNTT IINN11 AAUUDDIIOO

jacks on the TV.

Turn on the DVD player, insert a DVD.

Select Component1 input source using the

IINNPPUUTT

button on the remote control.

If connected to

CCOOMMPPOONNEENNTT IINN22

, select

Component2 input source.

Refer to the DVD player's manual for operating

instructions.

2

3

4

5

1

VIDEO

12

AUDIO

COMPONENT IN

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

1 2

EXTERNAL EQUIPMENT SETUP

14

EXTERNAL EQUIPMENT SETUP

Connecting with a S-Video cable

L R

S-VIDEOVIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Connect the S-VIDEO output of the DVD to the

SS --

VVIIDDEEOO

input on the TV.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the TV.

Turn on the DVD player, insert a DVD.

Select AV input source using the INPUT button on

the remote control.

Refer to the DVD player's manual for operating

instructions.

2

3

4

5

1

2

Connecting with a RCA cable

Connect the

AAUUDDIIOO

/

VVIIDDEEOO

jacks between TV and

DVD player. Match the jack colours (Video = yellow, Audio

Left = white, and Audio Right = red)

Insert a DVD into the DVD player and press PLAY on the

DVD player.

(

Refer to the DVD player owner’s manual.

)

Select

AV input source using the

IINNPPUUTT

button on the

remote control.

2

3

1

L

R

S-VIDEO

VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

EXTERNAL EQUIPMENT SETUP

1

15

AUDIO IN

(RGB/DVI)

RGB IN

(PC)

(CONTROL & SERVICE)

DIGITAL

AUDIO OUT

HDMI-DVD OUTPUT

Connecting HDMI cable

Connect the HDMI output of the DVD to the

HHDDMMII

IINN 22

jack on the set.

Select HDMI2 input source using the

IINNPPUUTT

button

on the remote control.

If connected to

HHDDMMII IINN 33

(or

HHDDMMII IINN 44

) jack,

select HDMI3 (or HDMI4) input source.

Refer to the DVD player's manual for operating

instructions.

1

2

3

GG

The TV can receive video and audio signals simultaneously

when using a HDMI cable.

GG

If the DVD does not support Auto HDMI, you must set the

output resolution appropriately.

NOTE

!

1

EXTERNAL EQUIPMENT SETUP

16

EXTERNAL EQUIPMENT SETUP

When connecting with a RF Cable

■

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

■

If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain

visible.

ANTENNA IN

AUDIO

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

OUTPUT

SWITCH

ANT IN

R

S-VIDEO VIDEO

ANT OUT

L

Wall Jack

Antenna

Connect the

AANNTT OOUUTT

socket of the VCR to the

AANNTTEENNNNAA IINN

socket on the TV.

Connect the antenna cable to the

AANNTT IINN

socket of the VCR.

Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for

viewing.

VCR SETUP

1

2

3

1

EXTERNAL EQUIPMENT SETUP

17

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Connecting with a RCA cable

Connect the

AAUUDDIIOO

/

VVIIDDEEOO

jacks between TV and

VCR. Match the jack colours (Video = yellow, Audio Left =

white, and Audio Right = red)

Insert a video tape into the VCR and press PLAY on the

VCR.

(

Refer to the VCR owner’s manual.

)

Select

AV input source using the

IINNPPUUTT

button on the

remote control.

2

3

1

GG

If both S-VIDEO and VIDEO sockets have been

connected to the S-VHS VCR simultaneously, only

the S-VIDEO can be received.

NOTE

!

S-VIDEO

L R

VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Connecting with a S-Video cable

Connect the S-VIDEO output of the VCR to the

SS --

VVIIDDEEOO

input on the TV. The picture quality is improved;

compared to normal composite (RCA cable) input.

Connect the audio outputs of the VCR to the

AAUUDDIIOO

input jacks on the TV.

Insert a video tape into the VCR and press PLAY on the

VCR. (Refer to the VCR owner’s manual.)

Select AV input source using the

IINNPPUUTT

button on the

remote control.

2

3

4

1

1 2

EXTERNAL EQUIPMENT SETUP

1

18

EXTERNAL EQUIPMENT SETUP

DIGITAL AUDIO OUT SETUP

- Sending the TV’s audio signal to external audio equipment via

the Digital Audio Output (Optical) port.

G

Do not look into the optical output port. Looking at the

laser beam may damage your vision.

CAUTION

OPTICAL

DIGITAL

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

RGB IN

(PC)

RS-232C IN

(CONTROL & SERVICE)

AUDIO IN

(RGB/DVI)

Connect one end of an optical cable to the TV Digital

Audio

(

Optical

)

Output port.

Connect the other end of the optical cable to the

digital audio

(

optical

)

input on the audio equipment.

Set the “TV Speaker option - Off ” in the AUDIO

menu.(

G

pp..6699

). Refer to the external audio equipment

instruction manual for operation.

2

3

1

2

EXTERNAL EQUIPMENT SETUP

Page is loading ...

LG 42PG60D Owner's manual

LG 42PG60D Owner's manual

Related papers

Other documents