Electrolux EWLP1AX User manual

Page is loading ...

2

www.electrolux.com

CONTENTS

1. SAFETY INFORMATION .........................................................................................3

2. SAFETY INSTRUCTION ..........................................................................................4

3. PRODUCT DESCRIPTION ......................................................................................6

4. USE ..........................................................................................................................6

5. CARE AND CLEANING ...........................................................................................7

6. WHAT TO DO IF ......................................................................................................7

7. INSTALLATION ........................................................................................................8

8. ENVIRONMENT CONCERNS .................................................................................8

WE'RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it has

been designed with you in mind. So whenever you use it, you can be safe in the knowledge

that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

3

ENGLISH

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible if an incorrect installation and use causes

injuries and damages. Always keep the instructions with

the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent disability.

Electric shock.

Ÿ This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they are supervised by an adult or a

person who is responsible for their safety.

Ÿ Do not let children play with the appliance.

Ÿ Keep all packaging away from children.

Ÿ Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

Ÿ If the appliance has a child safety device, we recom-

mend that you activate it.

Ÿ Cleaning and user maintenance shall not be made by

children without supervision.

1.2 General Safety

Ÿ Only a qualified person must install this appliance and

replace the cable.

Ÿ Internally the appliance becomes hot when in opera-

tion. Do not touch the lamp that is in the appliance.

Ÿ Do not use a steam cleaner to clean the appliance.

Ÿ Before maintenance cut the power supply.

Ÿ Do not use harsh abrasive cleaners or sharp metals

crapers to clean the glass door since they can scratch

the surface, which may result in shattering of the

4

www.electrolux.com

2. SAFETY INSTRUCTION

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

Ÿ Remove all the packaging.

Ÿ Do not install or use a damaged appli-

ance.

Ÿ Obey the installation instruction

supplied with the appliance.

Ÿ Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

Ÿ Keep the minimum distance from the

other appliances and units.

Ÿ Make sure that the appliance is

installed below and adjacent safe

structures.

Ÿ The appliance can not be placed in a

niche of the ceiling or in a cavity.

2.2 Electrical connection

WARNING!

Risk of fire and electrical shock.

Ÿ All electrical connections should be

made by a qualified electrician.

Ÿ The appliance can not be placed in a

glass.

Ÿ If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

Ÿ Ensure that the appliance is switched off before

replacing the lamp to avoid the possibility of electric

shock.

Ÿ The handling of this device and of all other electrical

devices requires the observance of some basic rules

for your own safety as the following: don't expose the

device to any weather influence as rain, etc.

WARNING!

During the switching on of the device high

temperatures can be reached around the lamp.

Please check the surface before you start working

there!

Don't put paper, cardboard, cloth, etc. between

device and fireproof covering board, as they might

catch fire.

During putting into operation insulation material

may emit corresponding smells.

5

ENGLISH

niche of the ceiling or in a cavity.

Ÿ The appliance must be earthed.

Ÿ Make sure that the electrical information

on the rating plate agrees with the

power supply. If not, contact an

electrician.

Ÿ Always use a correctly installed shock-

proof socket.

Ÿ Do not use multi-plug adapters and ex-

tension cables.

Ÿ Make sure not to cause damage to the

mains plug and to the mains cable.

Contact the Service or an electrician to

change a damaged mains cable.

Ÿ The shock protection of live and insula-

ted parts must be fastened in such

away that it cannot be removed without

tools.

Ÿ Connect the mains cable tips to the

mains cable only at the end of the

installation. Make sure that there is

access tothe mains plug after the

installation.

Ÿ Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

Ÿ The electrical installation must have an

isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation device

must have a contact opening width of

minimum 3 mm.

Ÿ In case of care and maintaining works

disconnect device from the eiectric

circuit by switch ing off the main switch

or quitting the voltage of the power

supply.

Ÿ Connect heat lamp by means of safety

plug to power supply system.

Device is ready for operation.

Connected load: 240V, 250W

2.3 Use

WARNING!

Risk of injury, burns or electric

shock or explosion.

Ÿ Always ensure during the use that the

worktop is protected from direct contact

with the light of the lamp (i.e. ceramic

dish, etc...)

Ÿ Device serves to keep warm food-short

termed.

Ÿ Warm keeping temperature depends on

the distance between lamp and food.

Ÿ The appliance is equipped with 250W

bulbs.

Ÿ Use this appliance in a household envi-

ronment.

Ÿ Do not change the specification of this

appliance.

Ÿ Make sure that the ventilation openings

are not blocked.

Ÿ Do not let the appliance stay unatten-

ded during operation.

Ÿ Deactivate the appliance after each

use.

Ÿ Do not operate the appliance with wet

hands or when it has contact with water.

Ÿ Do not use the appliance as a work

surface or as a storage surface.

Ÿ Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

WARNING!

Risk of damage to the appliance.

Ÿ Don't touch hot bulb with unprotected

hands.

Ÿ Do not cover device while heating.

2.4 Internal light

Ÿ The type of light bulb used for this

appliance, is only to keep food warm.

Do not use it for house lighting.

WARNING!

Risk of electric shock.

Ÿ Before replacing the lamp, turn off the

appliance from the power supply (4).

Ÿ Only use lamps with the same specifi-

cations.

2.5 Disposal

WARNING!

Risk of injury or suffocation.

Ÿ Disconnect the appliance from the

mains supply.

Ÿ Cut off the mains cable and discard it.

6

www.electrolux.com

3. PRODUCT DESCRIPTION

7

6

4

5

1

2

Installing hole

Cover plate

1

2

3

Slip wire

4

Power switch

5

Lampshade

6

Heating lamp

7

Tensionregulating

4. USE

min. 980

max.1980

WARNING!

Refer to the Safety chapters.

Put the plate with the food to keep warm

underneath the lamp.

Lower down the lamp till 40 cm above

the plate and switch on the lamp.

This distance from the plate will ensure

to keep food warm.

For lower temperatures just rise up the

warming lamp to your needs.

Always ensure during the use

that the worktop is protected from

direct contact with the light of the

lamp (i.e. ceramic dish, etc...)

Lamp must be used only above

the food for a max period of 10/15

minutes to avoid the risk to

overdry the food.

Do not position the lamp less

than 30 cm above the plate. Risk

to overcook the food.

Do not position the lamp less

than 30 cm above the working

top.

Risk to damage the worktop.

Do not leave the lamp unattended

when On.

40 cm

7

ENGLISH

6. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

Problem

Possible cause

Remedy

The lamp does not operate.

The lamp is defective.

Replace the lamp.

The switch does not

operate.

The switch is defective.

Call the Service.

If you cannot find a solution to the

problem yourself, contact your dealer or

the service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is in

the inner part of the lamp.

We recommend that you write the data

here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

........................................

5. CARE AND CLEANING

WARNING!

Refer to the Safety chapters.

Ÿ Clean the front of the appliance with a

soft cloth with warm water and a clean-

ing agent.

Ÿ To clean metal surfaces use a usual

cleaning agent.

Ÿ Cleaning and maintenance should only

be carried out by a competent person

under the strict supervision of an adult.

Never use abrasive cleaning materials

on the appliance.

Stainless steel or aluminium

appliances:

Clean the lamp with a wet

sponge only. Dry it with a soft

cloth.

Do not use steel wool, acids or

abrasive materials, as they can

cause damage to the lamp

surface. Clean the control panel

with the same precautions.

5.1 Removing the lamp

WARNING!

Be careful when you change the

lamp. There is a risk of electrical

shock.

Ÿ Disconnect the appliance with power

switch (4).

Ÿ Unscrew with care counter clock wise

the lamp.

Ÿ Screw clock wise the lamp and clean

the transparent part with care.

8

www.electrolux.com

7. INSTALLATION

Weight of the lamp: 3 kg

Maximum pull strenght: 20 kg

WARNING!

The person who is mounting the

lamp should make sure that the

fixing elements are right and

suitable for the walls and ceiling

he finds. The manufacturer

declines any responsibility for

damages caused by incorrect

mounting.

WARNING!

Refer to the Safety chapters.

7.1

Make sure that the worktop below the

lamp is made of an incombustible

material not printed or painted.

Real wood and artificial worktop material

can show colour changes if in direct

contact with the light of the lamp.

7.2 Electrical installation

WARNING!

Only a qualified person must do

the electrical installation.

The manufacturer is not

responsible if you do not follow

the safety precautions from the

chapter "Safety Information".

7.3 Cable

Cable types applicable for installation or

replacement: H07 RN-F, H05 RN-F,

H05RRF, H05 VV-F, H05 V2V2-F (T90),

H05BB-F.

Total power

Section of the

cable

maximum 250W

3 x 1 mm²

For the section of the cable refer to the

total power (on the rating plate) and to

the table:

8. ENVIRONMENT CONCERNS

Recycle the materials with the symbol

. Put the packaging in applicable

containers to recycle it.

Help protect the environment and human

health and to recycle waste of electrical

and electronic appliances. Do not

dispose appliances marked with the

symbol with the household waste.

Return the product to your local recycling

facility or contact your municipal office.

The earth cord (green / yellow cable)

must be 2 cm longer than phase and

neutral cables (blue and brown cables).

7.4 Tension regulation

Please rotate the spring of the tension

regulation (7) to calibrate the weight of

the lamp and reach a steady position.

7.5 Safety distance

Keep a minimum distance of 40 cm from

the center of the warming lamp to any

flamable, backprinted or backpainted

surfaces.

min. 40 cm

Page is loading ...

42

www.electrolux.com

Page is loading ...

06068189 0315

electrolux.com/shop

Electrolux EWLP1AX User manual

Electrolux EWLP1AX User manual

in other languages

Related papers

Other documents