Electrolux 268712 (AOS101GBD2) Datasheet

Type
Datasheet
Identification:
Technical Bulletin no:
Date:
Issuer:
Factory:
C08
PDD2005-10
18 May 2005
F. Fingolo (Ovens Customer Support Dept.)
PDD Vallenoncello - Italy
Subject
New boiler for AOS102G
Model
AOS 102 gas range
Problem
Low lifetime of burner gasket
Reason
Working temperature of the rubber close to its limits
Action in Factory
New boiler and protection of the gasket; optimized the distribution of
temperature in the combustion chamber. Modification in production from
SN 515.
Action in Field
In case of burnt gasket, the old boiler should be changed with the new
one.
The new boiler (0C2567) is interchangeable with the old one changing
also the pipe connecting burner and fan (0C2568), the ignition rod
(0C1866, changed the length of the cable from 970mm to 1040mm,
same spare part code, cleaned warehouse) and using another gasket
(0C2569) and the suitable insulation (0C2589)
New boiler with different dimensions
BOILER AOS102G
code: 0C2567
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIALE TREVISO, 15
33170 PORDENONE - ITALY
++39 0434 380528 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIALE TREVISO, 15
33170 PORDENONE - ITALY
++39 0434 380555 filippo.fingolo@electrolux.it
To use new boiler you have also to install:
New gas pipe connecting boiler burner and boiler fan
PIPE
code: 0C2568
Also is necessary to use one more gasket to protect boiler from overheating
GASKET
code: 0C2569
2
On new AOS102G boilers put the white gasket 0C2569 in the correct position (centering the holes) over
the boiler’s flange
Then put over white gasket the black one, centering on boiler’s studs
3
Use also kit for boiler’s insulation with suitable dimensions (0C2589)
INSULATION KIT
code: 0C2589
It is also necessary to use ignition rod with longer cable (0C1866)
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Electrolux 268712 (AOS101GBD2) Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI