2. DAS
  3. AERO-50

DAS AERO-50 Configurations Guide

  • Hello! I am an AI chatbot trained to assist you with the DAS AERO-50 Configurations Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
How to configure the FP10000Q Rear Panel Switch for Aero50.
Different combinations Components/Channels-Amplifier can be set.
A. One component by amplifier.
1. 15” speakers over all channels one amplifier.
Gain: 35dB. VPL: 121V. Mode: Soft. Other Parameters: OFF.
2. 8” Speakers over all channels one amplifier.
Gain: 35dB. VPL: 121V. Mode: Soft. Other Parameters: OFF.
3. M-75N drivers over all channels one amplifier.
Gain: 35dB. VPL: 101V. Mode: Soft. Other Parameters: OFF.
B. One Aero50 by amplifier.
.- 15” speaker Channel A, Gain: 35dB. VPL: 121V. Mode: Soft. Other Parameters: OFF.
.- 15” speaker Channel B, Gain: 35dB. VPL: 121V. Mode: Soft. Other Parameters: OFF.
.- 8” speakers Channel C, Gain: 35dB. VPL: 121V. Mode: Soft. Other Parameters: OFF
.- M-75 drivers Channel D, Gain: 35dB. VPL: 101V. Mode: Soft. Other Parameters: OFF
/