AP Management
Quick Installation Guide
English
1. Installation
2. Setup
Table of Content
Minimum System Requirement
Ÿ Web browser (Mozilla Firefox, Google Chrome or Internet Explorer 9 and above).
Ÿ 2GB RAM
Ÿ 1G HDD (XAMPP)
1. Installation
1
1. Double click on the AP Management main project Install file. Ap_mgmt_setup.prj.exe
2. Launch the Xampp Control Panel.
3. Start the Apache/MySQL servers by clicking on the Start button to the right.
4. Open the Apache default port by opening a web browser and navigating to http://127.0.0.1:8008/ap_mgmt/
5. Enter the default Username and Password:
Username: admin
Password: (blank)
2
2. Setup
1. Click on the “Device Discovery” tab at the top.
2. Select the device(s) you want to add and enter the default username and password.
Username: admin
Password: admin
3. Press “Manage” to Manage selected access points or click “Manage” to the right of each access point.
Note: To manage ALL access points, click “Manage All.”
4. Click on the “Batch Setup” tab at the top of the page. From here, you can manage your access points and customize any necessary
settings.
For further instructions on how to manage your access points using AP Management, please refer to the User's Guide.
Product Warranty Registration
Please take a moment to register your
product online. Go to TRENDnet’s website at:
http://www.trendnet.com/register
TRENDnet
20675 Manhattan Place, Torrance, CA 90501. USA
Copyright © 2015. All Rights Reserved. TRENDnet.
Technical Support
If you have any questions regarding the product
installation, please contact our Technical Support.
Toll free US/Canada: 1-866-845-3673
Regional phone numbers available
at www.trendnet.com/support
Russian Technical Support: 7 (495) 276-22-90
Телефон технической поддержки: 7 (495) 276-22-90
AP Management
AP Management
/
