Haier Freezer DW-40L626 User manual

Brand: Haier

Model: Freezer DW-40L626

Type: User manual

This manual is also suitable for

DW-40L626

D

eep

F

reezer

User's manual

DW-40L626

Please read this manual

carefully before using.

Retain it for future reference.

2

3

4

5

6

6

6

8

9

10

11

12

13

13

Diagram of Parts

Safety Precautions

2. Operation introduction

1

40

40

700

40

1

3

12

Technical data in this manual may vary from that of the product

you have just purchased due to technical improvement.

Microprocessor

40 40

auto-

Intelligent

service

1

Handle

Compressor

Cabinet

Control

Panel

Foaming

Door

from

2

Gurgal

Gurgal

11

1

0

3

4

9

ULT freezer should be in charge of special person and check and record the

operation condition in everyday. If it meet power cut or any other failures and the

freezer doesn't work, the temperature inside cabinet will increase. And if there will

be without power for a long time, please get out the storage and load them into

other low temperature container for avoiding samples damage.

Please confirm again the temperature inside freezer is what you need before you

load the goods into freezer, otherwise, it will be make damage to the goods for

improper temperature.

8

Leave the appliance standing in its final position for at least 24 hours before switching it on. Before

power on, please do switch on the charge battery switch of the electric cabinet at the back of the

machine can be seen at the back of the machine, about the charge battery switch fixed on the

electric cabinet, and the charge battery switch is at the right up of the outlet of the electric cabinet

power cord.

1.

User's

manual

5

Haier Deep Freezer

-40

6

When the operator need to stop the machines, first cut down the power supply

(but the display board work all the same, this function is supplied by the

charge battery), and then close the switch of charging battery which located

at electric control box behind the cabinet.

Silence

At the state of unlock, press this key to set temperature

First press “up”, digital temperature begin to flash, and press” up” or “down”

and let the value to “06”, then press the “SET” key for about 3 seconds. “lock”

light die, that means it has enter unlock state. Press “SET” key again, check

and set cabinet temperature, high temperature alarm, low temperature

alarm step by step. Press “up” and “down” unconsciously, the temperature

will be set per 1 , and if press keys continuously, the temperature value will

be increased or decreased very quickly.

When copressor is in operation, compressor is on display.

7

1
2
3
4
5
6
7
8

Haier Freezer DW-40L626 User manual

Brand: Haier

Model: Freezer DW-40L626

Type: User manual

This manual is also suitable for

DW-40L626

Download PDF

Related papers

Other documents