Gemini PLAY2GO Operating instructions

Brand: Gemini

Model: PLAY2GO

Type: Operating instructions

WWW.GEMINISOUND.COM

QUICKSTART GUIDE

GEMINI PLAY2 G O

QUICK SETUP

Box ConTAInS ThE followInG:

• PLAY2GO Portable PA

• (1) Microphone + cable

• (1) Power Cable

1. Place the PLAY2GO in the desired location for operation and plug it into a power source or verify the battery is fully

charged for cord free operation.

2. Turn the volume levels on the PLAY2GO down prior to turning the unit on or connecting any input sources.

3. Power On the PLAY2GO.

4. Connect any audio input sources by referencing the setup diagram:

• Bluetooth – Press the Bluetooth button for 3 seconds and the blue led will blink and several beeps will be heard as it

locates another device to connect with. Then consult your device’s operating instructions for ﬁnding and connecting to

another Bluetooth device.

• USB – Plug your USB Memory Stick into the correct input and use the controls on the MP3 Player to ﬁnd and play tracks

• SD - Plug your SD Card into the correct input and use the controls on the MP3 Player to ﬁnd and play tracks

• Microphone Inputs – Connect a 1/4” Microphone cable to the input.

• AUX Input – Stereo RCA or Stereo RCA to 1/8” cords can be used to connect an external MP3 player or another device.

5. Begin playback on desired device (Begin with the volume low in order to ﬁnd the ideal level settings on the PLAY2GO

and your input source).

6. Turn the volume on the PLAY2GO inputs and master volume up to the desired level.

Microphone Volume

Aux Input Volume

Master Volume

MP3 Player Controls:

Volume +/- , Play/Pause,

Track Search, Mode

Mic 1 & 2 Input:

Connect a

microphone or

instrument via

1/4” cable

Aux Input:

Connect an

RCA input

Bluetooth

Enable

SD/USB Input

Battery

Indicator

Power

Connector/

Switch

Gemini PLAY2GO Operating instructions

Gemini PLAY2GO Operating instructions

Gemini PLAY2GO Operating instructions

Other documents