224V-RC Photo Eye

Nice Apollo 224V-RC Photo Eye User manual

  • Hello! I am an AI chatbot trained to assist you with the Nice Apollo 224V-RC Photo Eye User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the power supply requirement for the Apollo 224V-RC Photo Eye?
    What is the maximum cable length that can be used with the Apollo 224V-RC Photo Eye?
    What is the sensing range of the Apollo 224V-RC Photo Eye?
    What is the response time of the Apollo 224V-RC Photo Eye?
    What is the operating temperature range of the Apollo 224V-RC Photo Eye?
MRPC33
Safety Reflective Photo Eye
with Hood Kit
Congratulations on purchasing the MRPC33
Safety Reflective Photo Eye with Hood Kit from
D
F Supply, Inc.
Follow these instructions to properly
set up
your Safety Reflective Photo Eye Kit with various
different types of automatic
gate
and door
openers
or
operators.
DF Supply, Inc.
Web: www.dfsupplyinc.com
Questions?
BROWN
BLUE
GRAY
WHITE
BLACK
POWER
POWER
NORMALLY OPEN
COMMON
}
Wiring the Photo Eye to your Gate Opener
Common Wiring Ports
Brown
Black
Gray White
Apollo 635/636/835/836
12V
N
ot Used
14 GND
Apollo 1050i
V+
N
ot Used
28 29
BFT Libra UL
12V
N
ot Used
Safety GND
BFT Rigel 5
11
18
N
ot Used
15
FAAC E024U
20
3.5
N
ot Used
33
FAAC 455D
8
4
Not Used
6
Battery +
12
Not Used
16
Linear Apex
DC+ C-OBS COM
USAutomatic††
DC+
N
ot Used
C-OBS / O-OBS*
COM
Blue
Linear Apex II
GTO Blue Board
*Must splice from battery*
Apollo 936i
17
Not Used
Not Used
Safety
COM
GND
GND
GND
12
7
16
DC-
COM
DC-
21
J2 Pin 12 J2 Pin 8
Not Used
J2 Pin 7
J2 Pin 2
†† When installing USAutomatic, 12V battery must be connected to properly align photo eye beam.
Disclaimer: Please note this is only a suggestion for typical applications. Your gate opener control board may vary due to manufacturer
revisions. Please consult your gate opener manual for detailed instructions.
*When installing for Linear Apex II, you must use 2 Photoeyes.
*Linear Apex II
NORMALLY CLOSED
12-30V DC/AC 60 Hz
Features and Specifications
Sensing range adjustable potentiometer (optional)
PC casing, anti fog / dew / rains
IP-55 Water Proof
Square/ Round Shape reflector selectable
Wrap around mounting bracket
Input Volt.: 12-30V DC/AC 60 Hz
2 LED indicators for power and beam alignment
Hood for round / square shape reflector (optional)
Detection Method
Sensing Range
Supply Volt
Response Time
Sensing Range (adjustable)
Emitting Element
LED Indicator
(Left Side)
Power LED
Indicator (Right
Side)
Dimensions
Current Consumption
Output Method
Switching Capacity
Connection Method
Housing Method
Operating Temp.
Water Proof
Cable Wires
Retro-Reflection
10 meters
12-30V DC/AC 60 Hz
10 msec.
10m
IR LED
Beam Aligned
N.C.: ON
N.O.: OFF
Beam Broken
N.C.: OFF
N.C.: ON
When Powered: LED ON
Power Off: LED OFF
20mm(w) x 63mm(h) x 39mm(d)
100mA
SPDT Relay output
30VDC/AC, 2A
Cable wires: Brown / Blue / White / Black / Gray
Case: PC ; Lens: PC
-4°F to 131°F (-20°C to 55°C)
IP-55
2517 / 24AWG / 5 cores
12V
/