Wacker Neuson PG2TA Parts Manual

Type
Parts Manual

Wacker Neuson PG2TA is a centrifugal water pump designed for dewatering applications. It features a powerful motor and a durable construction, making it suitable for demanding jobs. The pump is capable of handling solids up to 1/4 inch in diameter and can pump up to 158 gallons per minute. It is also self-priming, so it can be used in applications where the water source is not under pressure. With its compact size and lightweight design, the PG2TA is easy to transport and maneuver, making it an ideal choice for a variety of dewatering tasks.

Wacker Neuson PG2TA is a centrifugal water pump designed for dewatering applications. It features a powerful motor and a durable construction, making it suitable for demanding jobs. The pump is capable of handling solids up to 1/4 inch in diameter and can pump up to 158 gallons per minute. It is also self-priming, so it can be used in applications where the water source is not under pressure. With its compact size and lightweight design, the PG2TA is easy to transport and maneuver, making it an ideal choice for a variety of dewatering tasks.

www.wackerneuson.com
0620062 200
11.2009
Dewatering Pumps
Zentrifugal-Entwässerungspumpen
Bombas Centrifugas para Aguas Limpias
Pompes centrifuges à eau claire
PG 2TA
Parts Book
Ersatzteile
Lista de Repuestos
Liste de Pièces de Rechange
A nameplate listing the Model Number, Item Number, Revision, and Serial Number is
attached to each unit. Please record the information found on this plate so it will be available
should the nameplate become lost or damaged. When ordering parts or requesting service
information, you will always be asked to specify the model, item number, revision number,
and serial number of the unit.
Ein Typenschild mit Typ, Artikelnummer, Version und Maschinen-Nummer ist an jedem
Gerät angebracht. Die Daten von diesem Schild bitte notieren, damit sie auch bei Verlust
oder Beschädigung des Schildes noch vorhanden sind. Der Typ, die Artikel-Nummer, die
Versions- Nummer und die Maschinen-Nummer sind bei der Ersatzteilbestellung oder
Nachfragen bezüglich Service-Informationen stets erforderlich.
Una placa de identificación con el modelo, número de referencia, nivel de revisión y número
de serie ha sido añadida en cada máquina. Favor de anotar los datos en la placa en caso
de que la placa de identificación sea destruida o perdida. En todos los pedidos para
repuestos necesita siempre el modelo, el número de referencia, el nivel de revisión y el
número de serie de la máquina en cuestión.
Une plaque signalétique mentionnant le modèle, le numéro de référence, le niveau de
revision et le numéro de série est fixée sur chaque machine. Veuillez noter les informations
relevées sur cette plaque de façon à ce qu’elles soient toujours disponibles si la plaque
signalétique venait à être perdue ou endommagée. Lorsq ue vous commandez des pièces
détachées ou vous sollicitez des informations après-vente, on vous demandera toujours de
préciser le modèle, le numéro de référence, le niveau de revision et le numéro de série de
la machine.
My machine’s numbers are / Die Nummern meines Gerätes sind /
Los números de mi máquina son / Les numéros de ma machine son :
PG 2TA
Nameplate
Typenschild
Plaque signalétique
Placa de Identificación
0620062 - 200
3
Pump Components
Bestandteile der Pumpe
Piezas de la Bomba
Parties Constituantes de la Pompe
6
Labels
Aufkleber
Calcomanias
Autocollants
10
Accessories
Sonderzubehör
Accesorios
Accessoires
13
Coupling
Kupplung
Acoplamiento
Accouplement
14
Coupling
Kupplung
Acoplamiento
Accouplement
16
PG 2TA
Table of Contents
Inhaltsverzeichnis
Indice
Table des matières
0620062 - 200
5
Ref.
Pos.
Part No.
Artikel Nr.
Qty.
St.
Description
Beschreibung
Descripción
Description
Measurem./Abm.
Torque/Drehm.
Norm
Sealant
Schmierstoff
1 0162571 2
Drain Plug Set
Schraubverschluß kpl.
Tapón roscado compl.
Bouchon compl.
2 0054958 2
O-Ring
O-Ring
Anillo-O
Joint torique
25 x 2,8
3 0054967 4
Hexagonal head cap screw
Sechskantschraube
Tornillo hexagonal
Boulon à tête hexagonale
M8 x 25
25Nm/18ft.lbs
4 0117945 1
Discharge port
Auslaufstutzen
Lumbrera
Orifice de refoulement
2in
5 0162573 1
Delivery flange packing
Dichtungsscheibe
Empaque de bridas
Garniture de brides
6 0110732 3
Hexagonal head cap screw
Sechskantschraube
Tornillo hexagonal
Boulon à tête hexagonale
M8 x 20
7 0117947 1
Suction port
Öffnung
Lumbrera de aspiración
Port
2in
8 0162575 1
Flapper valve gasket
Prallplattendichtung
Empaquetadura
Garniture
9 0110505 4
Screw
Schraube
Tornillo
Vis
M8 x 22
10 0162578 1
Pump case housing
Gehäuse
Caja
Carter
11 0162580 1
O-Ring
O-Ring
Anillo-O
Joint torique
12 0162581 1
Volute
Spiralgehäuse
Voluta
Volute
13 0162583 1
Impeller
Pumpenlaufrad
Impulsor
Rotor avec aubes
14 0162585 1
O-Ring
O-Ring
Anillo-O
Joint torique
15 0162587 1
Mounting flange
Flansch
Brida
Bourrelet d'assemblage
16 0162589 3
Washer
Scheibe
Arandela
Rondelle
17 0162591 1
Mechanical seal
Gleitringdichtung
Sello mecánico
Garniture mécanique
18 0162593 4
Screw
Schraube
Tornillo
Vis
19 0072996 4
Washer
Scheibe
Arandela
Rondelle
21 0162597 4
Screw
Schraube
Tornillo
Vis
22 0162598 1
Frame
Rahmen
Chasis
Châssis
23 0070014 4
Nut
Mutter
Tuerca
Écrou
M8
24 0077657 3
Clamp
Schelle
Abrazadera
Agrafe
25 0162601 1
Suction strainer
Saugkorb
Colador
Crépine
26 0162602 2
Coupler Kit
Satz-Kupplungen
Juego de acoplamientos
Jeu d'accouplements
PG 2TA
Pump Components
Bestandteile der Pumpe
Piezas de la Bomba
Parties Constituantes de la Pompe
0620062 - 200
7
Labels
Aufkleber
PG 2TA
Calcomanias
Autocollants
10
0620062 - 200
Ref.
Pos.
Part No.
Artikel Nr.
Qty.
St.
Description
Beschreibung
Descripción
Description
Measurem./Abm.
Torque/Drehm.
Norm
Sealant
Schmierstoff
1 0117434 1
Label sheet
Aufkleberblatt
Hoja de calcomanias
Feuille d'autocollants
2 0153793 1
Label
Aufkleber
Calcomania
Autocollant
4 0177770 2
Label-Wacker Neuson logo
Aufkleber-Wacker Neuson Logo
Calcomanía-Wacker Neuson logotipo
Autocollant-Wacker Neuson logo
20
5 0222084 1
Label-Wacker Neuson symbol
Aufkleber-Wacker Neuson symbol
Calcomanía-Wacker Neuson símbolo
Autocollant-Wacker Neuson symbole
40 OD
6 0117451 2
Label-PG 2
Aufkleber-PG 2
Calcomania-PG 2
Autocollant-PG 2
10
PG 2TA
Labels
Aufkleber
Calcomanias
Autocollants
0620062 - 200
11
Accessories
Sonderzubehör
Accesorios
Accessoires
Coupling
Kupplung
PG 2TA
Acoplamiento
Accouplement
14
0620062 - 200
Ref.
Pos.
Part No.
Artikel Nr.
Qty.
St.
Description
Beschreibung
Descripción
Description
Measurem./Abm.
Torque/Drehm.
Norm
Sealant
Schmierstoff
1 0051452 1
Coupling
Kupplung
Acoplamiento
Accouplement
50mm/2in
2 0053387 1
Gasket
Dichtung
Junta
Joint
50mm/2in
PG 2TA
Coupling
Kupplung
Acoplamiento
Accouplement
0620062 - 200
15
Coupling
Kupplung
PG 2TA
Acoplamiento
Accouplement
16
0620062 - 200
Ref.
Pos.
Part No.
Artikel Nr.
Qty.
St.
Description
Beschreibung
Descripción
Description
Measurem./Abm.
Torque/Drehm.
Norm
Sealant
Schmierstoff
1 0026690 1
Coupling
Kupplung
Acoplamiento
Accouplement
50mm/2in
2 0026919 1
Gasket
Dichtung
Junta
Joint
18 0170894 2
Screw-hex head
Sechskantschraube
Tornillo principal del hexágono
Vis principale d'hexagone
19 0170895 1
Fuel line
Kraftstoffleitung
Manguera de combustible
Conduit de carburant
4.5 x 180
PG 2TA
Coupling
Kupplung
Acoplamiento
Accouplement
0620062 - 200
17
Wacker Neuson SE - Preußenstraße 41 - 80809 München - Tel.: +49-(0)89-35402-0 - Fax: +49-(0)89-35402-390
Wacker Neuson Corporation - P. O. Box 9007 - Menomonee Falls, WI 53052-9007 - Tel.: (262)-255-0500 - Fax: (262)-255-0550
Wacker Neuson Ltd. - Tower 1, Grand Century Place - 193 Prince Edward Road West - Mongkok, Kowloon - Hong Kong, VR China - Tel: +852-3605 5360, Fax: +852-2406 6021
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Wacker Neuson PG2TA Parts Manual

Type
Parts Manual

Wacker Neuson PG2TA is a centrifugal water pump designed for dewatering applications. It features a powerful motor and a durable construction, making it suitable for demanding jobs. The pump is capable of handling solids up to 1/4 inch in diameter and can pump up to 158 gallons per minute. It is also self-priming, so it can be used in applications where the water source is not under pressure. With its compact size and lightweight design, the PG2TA is easy to transport and maneuver, making it an ideal choice for a variety of dewatering tasks.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages