Mar-18 Product Code: 1011T / 1011TR
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
OWNER’S MANUAL
PRODUCT CODE: 1011T/1011TR
WORKSHOP WALL CABINET
Product
Code
Cabinet
Colour
Dimensions
Weight
Shelves
Hooks
1011T
Blue
1200(W)x200(D)x600(H)
17.1kg
6
18
1011TR
Red
1200(W)x200(D)x600(H)
17.1kg
6
18
Product Code: 1011T/1011TR
Made in China to TQB Brands Pty Ltd specifications Page 2
Visit us at www.tqbbrands.com.au
WARNING
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before
use of this wall cabinet.
Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TQB Brands Pty Ltd policy of continuous improvement determines the right to make
modifications without prior warning.
CONTENT
WARNING .............................................................................................................................. 2
CONTENT ............................................................................................................................... 2
SAFETY INSTRUCTIONS ........................................................................................................... 3
ASSEMBLY INSTRUCTIONS ...................................................................................................... 4
PARTS LIST ............................................................................................................................. 6
WARRANTY ............................................................................................................................ 7
Product Code: 1011T/1011TR
Made in China to TQB Brands Pty Ltd specifications Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
SAFETY OPERATNG INSTRUCTIONS
- Always distribute objects evenly in the wall cabinet.
- Do not lean or climb onto the wall cabinet.
- Only use this wall cabinet for the purpose for which it has been designed.
- Do not modify any component of this wall cabinet.
- When servicing, use only TradeQuip identical replacement parts. Use of any other
parts will void the warranty.
- Use the right product for the job. There are certain applications for which the wall
cabinet was designed. Do not modify the wall cabinet and do not use the wall
cabinet for a purpose for which it was not intended.
- This product is intended for indoor use only.
Product Code: 1011T/1011TR
Made in China to TQB Brands Pty Ltd specifications Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY INSTRUCTIONS
1. FEATURES
This TradeQuip "Made for the Trade" 1200mm powder coated space-saving wall cabinet
features three lockable doors, six shelves and 18 hooks. The top, bottom and sides are
constructed from sturdy 1mm pressed and welded steel. This durable steel constructed
wall cabinet is designed with three storage compartments and lockable doors for added
security. It can be easily hung on a wall or used freestanding on a shelf or bench.
2. BEFORE USE
Prior to use conduct a visual inspection by checking for abnormal conditions, such as
cracked joints and damaged, loose, or missing parts.
3. ASSEMBLY
Unpacking: after removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. The packaging materials
(Polyethylene bags, polystyrene etc.), must be disposed of in an appropriate refuse
collection container. These materials must not be left within the reach of children as they
are potential sources of danger.
Wall Cabinet Assembly:
- Hold the top panel vertically with the long back edge on the floor.
- The front edge of the top panel has 3 holes that you will use later for the doors.
Make sure that this front edge is up off of the floor, then attach the right side and
left side panels using bolts and screws. Attach the centre panel (I) and (II) using the
bolts and screws. Make sure that you don’t confuse them. The centre panel (II) has a
“double” lip on the front.
- Stand the partial assembled section upright and attach the back panel using the
bolts, and screws.
Door Placement
- Lay the partially assembled section on its back. Ensure that you have the doors in
their proper positions; place each door swivel pin in the correct hole in the top
panel.
- Line up the bottom swivel pins in the bottom panel and then attach the bottom
panel to both side panels and the centre panel using the bolts, and screws.
Hanger Brackets and Door Locks
- Fasten the 2 hanger brackets to the back of the back panel using bolts and screws.
- Fit the door lock onto each of the 3 doors, attach the washer and tighten the nut.
Finishing Touches
- Securely tighten all bolts and screws.
- Install shelves and hooks.
- Mount cabinet on the wall using masonry anchors or wood screws (not included).
Ensure anchors or wood screws are capable of holding the weight of the wall cabinet
Product Code: 1011T/1011TR
Made in China to TQB Brands Pty Ltd specifications Page 5
Visit us at www.tqbbrands.com.au
and all tools you will be storing in the wall cabinet. If in doubt use a larger anchor or
wood screw to secure cabinet to the wall.
4. MAINTENANCE
- Regularly wipe dirt and grime from surface with a soft cloth.
- Check all fittings are tight before each use.
5. SERVICE & REPAIR
Any Wall cabinet found damaged in any way, or found to be worn or operates abnormally
should be removed from service until repaired by an authorised service agent. Owners
and / or operators should be aware that repair of this product may require specialised
equipment and knowledge. Only authorised parts, labels and decals shall be used on this
equipment. Annual inspection of the Wall cabinet is recommended and can be made by
an authorised repair facility to ensure that your equipment is in optimum condition and
that the equipment has the correct decals and safety labels specified by the
manufacturer.
Product Code: 1011T/1011TR
Made in China to TQB Brands Pty Ltd specifications Page 6
Visit us at www.tqbbrands.com.au
PARTS LIST
Part #
Description
QTY
Part #
Description
QTY
1
Top Panel
1
11
Right Door
1
2
Centre Panel (I)
1
12
Bottom Panel
1
3
Centre Panel (II)
1
13
Centre Door
1
4
Hanger Bracket
2
14
Lock
1
5
Bolt M5 x 8
24
15
Left Door
1
6
Screw M5
24
16
Left Side Panel
1
7
Right Side Panel
1
17
Washer
6
8
Back Panel
1
9
Hook
18
10
Shelf
6
Product Code: 1011T/1011TR
Made in China to TQB Brands Pty Ltd specifications Page 7
Visit us at www.tqbbrands.com.au
WARRANTY
TradeQuip products have been carefully tested and inspected before shipment and are
guaranteed to be free from defective materials and workmanship for a period of 12 months
from the date of purchase except where tools are hired out when the guarantee period is
ninety days from the date of purchase.
Should this piece of equipment develop any fault, please return the complete tool to your
nearest authorised warranty repair agent or contact TQB Brands Pty Ltd Warranty team –
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee does not apply to
normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe
handling, alterations, accident, or repairs attempted or made by any personnel other than the
authorised TQB Brands Pty Ltd repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a
dated receipt or invoice to verify your proof of purchase within the 12 month period.
Consumer Guarantee
Our goods come with a guarantee that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
/
