2. Grizzly
  3. G0898

Grizzly G0898 Owner's manual

  • Hello! I have reviewed the Grizzly G0898 2" x 48" Belt Grinder/Sander datasheet. This document provides detailed specifications and features of the machine, such as its 4000 FPM belt speed, tilting work table, and a quick-release belt tension lever. I am ready to help with any questions you have about this device.
  • What is the voltage requirement?
    What are the dimensions of the sanding belt?
    What is the sanding belt speed?
    What is the power of the motor?
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model G0898
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0898 2" X 48" 2‐WHEEL BELT GRINDER/SANDER
Product Dimensions:
Weight................................................................................................................................................................ 95 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................ 22-1/2 x 28-1/2 x 28-1/2 in.
Footprint (Length x Width)..................................................................................................................... 10-1/2 x 13 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 137 lbs.
Length x Width x Height....................................................................................................................... 25 x 28 x 17 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement............................................................................................. 110V or 220V, Single-Phase, 60 Hz
Prewired Voltage.................................................................................................................................................. 110V
Full-Load Current Rating.................................................................................................... 11A at 110V, 5.5A at 220V
Minimum Circuit Size..............................................................................................................................................15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.................................................................................................................................................6 ft.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included..........................................................................................................................................................Yes
Included Plug Type................................................................................................................................................ 5-15
Recommended Plug Type...................................................................................................................... 6-15 for 220V
Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key
Motors:
Main
Horsepower................................................................................................................................................ 1 HP
Phase............................................................................................................................................ Single-Phase
Amps....................................................................................................................................................11A/5.5A
Speed................................................................................................................................................ 1720 RPM
Type................................................................................................................. TEFC Capacitor-Start Induction
Power Transfer ............................................................................................................................................ Belt
Bearings..................................................................................................... Shielded & Permanently Lubricated
Centrifugal Switch/Contacts Type......................................................................................................... External
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model G0898
Main Specifications:
Belt Sander Info
Sanding Belt Width...................................................................................................................................... 2 in.
Sanding Belt Length.................................................................................................................................. 48 in.
Sanding Belt Speed........................................................................................................................... 4000 FPM
Sanding Belt Tilt................................................................................................................................ 0 - 90 deg.
Table Length..........................................................................................................................................3-5/8 in.
Table Width........................................................................................................................................... 2-1/2 in.
Table Thickness........................................................................................................................................3/8 in.
Table Tilt............................................................................................................................................0 - 90 deg.
Table-to-Floor Height.............................................................................................................................8-1/2 in.
Max Height of Belt in Vertical Position....................................................................................................... 24 in.
Contact Wheel Diameter..............................................................................................................................7 in.
Contact Wheel Width................................................................................................................................... 2 in.
Belt Tension Release Type......................................................................................................... Quick-Release
Platen Type.......................................................................................................................................... Cast Iron
Platen Length........................................................................................................................................ 5-7/8 in.
Platen Width................................................................................................................................................ 2 in.
Idler Wheel Diameter................................................................................................................................... 6 in.
Idler Wheel Width........................................................................................................................................ 2 in.
Construction Materials
Base.............................................................................................................................................. Formed Steel
Frame...................................................................................................................................................Cast Iron
Paint Type/Finish....................................................................................................................... Powder Coated
Other Specifications:
Country of Origin .............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location .................................................................................................................................. ID Label
Features:
4000 FPM Belt
2" x 48" 150-Grit Belt Included
Work Table with Adjustable Angle
Removable Platen
Built-In Circuit Breaker
Frame Pivots 90 Deg. for Vertical or Horizontal Grinding
Single-Knob Tracking Adjustment
Rubber-Coated Contact Wheel
Quick-Release Belt Tension Lever
/