LIGHT MY BRICKS 42128 Operating instructions

LEGO® HEAVY-DUTY TOW TRUCK

#42128 LIGHT KIT

INSTALLATION GUIDE

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTALLATION GUIDE 2

Light My Bricks

LEGO® HEAVY-DUTY TOW TRUCK

42128 INSTALLATION GUIDE

Hi There!

We’re here to help you get started on the LEGO®

Heavy-Duty Tow Truck 42128 Light Kit.

This PDF details the instructions for the LED light kit only. If

you are wishing to purchase this product, please click here

to view the product page.

If you run into any issues, please refer to the troubleshoot-

ing section towards the end of this guide.

Have fun and enjoy!

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

v

PACKAGE CONTENTS 3

PACKAGE CONTENTS: ASSORTED BRICKS:

1x Rotating Bit Light

1x White Strip Light

4x Cool White 15cm Bit Light

6x White 30cm Bit Light

2x Warm White Large 30cm Bit Light

12x Orange 30cm Bit Light*

2x Blue 30cm Bit Light

3x 6-Port Expansion Board

2x 8-Port Expansion Board*

1x 12-Port Expansion Board

1x NC Push Board

1x Multi-Effects Board

3x Adhesive Squares

•2x Round Plate 1x1 Open Stud - Black

•2x Round Plate 1x1 - Trans Red

•6x Round Plate 1x1 - Trans Orange

•6x Round Plate 1x1 - Trans Clear

•3x Technic Pin 1/2 - Light Grey

•1x Cone 1 x 1 W Top Groove - Trans Orange

•2x Plate 1x1 Mod Rounded w Handle - Black

•2x Tile 1x1 W Clip Round Edges - Black

•2x Brick 1x8 - Light Grey

•2x Bracket 1x2-1x4 – Light Grey

2x 30cm Connecting Cable*

3x 15cm Connecting Cable

3x 5cm Connecting Cable

1x USB Power Cable

(Power Source not Included) * Indicates components which include spares

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

CONTENTS 4

Contents

Before You Begin

Blueprint

Instructions

Final Product

Troubleshooting

Contact

5

8

9

42

43

48

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 5

Before You Begin

Laying cables in between

and underneath bricks

Cables can ﬁt in between and underneath

LEGO® bricks, plates, and tiles providing

they are laid correctly between the

LEGO® studs. Do NOT forcefully join

LEGO® together around cables; instead

ensure they are laying comfortably in

between each stud.

CAUTION: Forcing LEGO® to connect over

a cable can result in damaging the cable

and light.

Connecting Cable

Connectors To Expansion

Boards

Take extra care when inserting connectors

to ports of Expansion Boards. Connectors

can be inserted only one way. With the

expansion board facing up, look for the

soldered “=” symbol on the left side of the

port. The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into the

port. If a plug won’t ﬁt easily into a port

connector, do not force it.

Incorrectly inserting the connector can re-

sult in bent pins inside the port or possible

overheating of the expansion board when

connected.

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 6

Before You Begin

Connecting Cable

Connectors To Strip Lights

Take extra care when inserting connectors

to ports on the Strip Lights. Connectors

can be inserted only one way. With the

Strip Light facing up, ensure the side of

the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into

a port connector, don’t force it. Doing so

will damage the plug and the connector.

Connecting Micro Cable

Connectors To Micro

Expansion Board Ports

Take extra care when inserting the

micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit

Lights to Micro Expansion Boards is similar

to connecting lights and cables to Strip

Lights. With the expansion board facing

up, ensure the side of the connector with

the wires exposed is facing down. If a plug

won’t ﬁt easily into a port connector, do

not force it. Use your ﬁngernail to push the

plastic part of the connector to the micro

port.

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 7

Before You Begin

Installing Bit Lights Under

Lego® Bricks And Plates

When installing Bit Lights under LEGO®

pieces, ensure they are placed the correct

way up (Yellow LED component exposed).

You can either place them directly on top of

LEGO® studs or in between.

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 8

BLUEPRINT

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 9

INSTRUCTIONS

To ensure a smooth installation of

your light kit, please read and follow

each step carefully. If you run into

any issues, please refer to the online

troubleshooting guide.

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 10

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

1 2

Cool White 15cm Bit Light

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 11

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm Bit Light

Round Plate 1x1 - Trans Clear Round Plate 1x1 - Trans Clear

Lightly bend the

led cable to be ﬂat

with the headlight

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 12

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

3

x2

Partially

disconnect the

“Power Tow” piece

enough to allow a

cable to ﬁt through

Partially

disconnect the

“Power Tow” piece

enough to allow a

cable to ﬁt through

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 13

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

46-Port Expansion Board

30cm Connecting Cable

Connect the

cables from the

headlights into the

Expansion Board

Exclude the 30cm

Connecting Cable

when twisting the

wires

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 14

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

5

2x Adhesive Squares

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 15

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 16

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

8-Port Expansion Board

6

Connect the

cable from Step 5 to

the Expansion Board

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 17

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

7

Orange 30cm Bit Light

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 18

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

815cm Connecting CableNC Push Board

White Strip Light

Orange 30cm Bit Light

Connect the 15cm

Connecting Cable to

the “OUT” port of the

NC Push Board

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 19

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

15cm Connecting Cable

9

10 Adhesive Square

Stick the Strip

Light over the cables

Connect the 15cm

Connecting Cable to

the “IN” port of the

NC Push Board

LEGO HEAVY-DUTY TOW TRUCK 42128 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 20

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Connect the

cable from the NC

Push Board

Connect the

cables that come

from underneath the

Strip Light

Press down the

Board to ensure it

sticks well

Make sure the

Board is slightly

poking out

Page is loading ...

LIGHT MY BRICKS 42128 Operating instructions

LIGHT MY BRICKS 42128 Operating instructions

Related papers

Other documents