Displays2go SMMDF1 Assembly Instructions

COMPONENTS

Dress Form x 1

12mm Screw x 1

ASSEMBLY INSTRUCTIONS

Base x 1

SMMDF1 - METAL DRESS FORM V19.11

STEP 1.

Connect the Bottom Pole (B) to the Base (A) with

Screw (E). Secure the Screw with wrench.

Bottom Pole x 1

Middle Pole x 1

If you have any questions regarding our products,

please visit us at www.displays2go.com or contact D2G

customer service at 844-221-3388.

Scan QR code to visit

the product page:

STEP 2.

Connect the Middle Pole (C) with the Bottom Pole.

Make sure holes on the side of the poles are

aligned and tighten it with the wing screw.

STEP 3.

Assemble the Dress Form Body (D) onto the top of

the Middle Pole. Fix the Dress Body onto the pole

securely with the wing screw.

STEP 4.

The assembly is finished.

To adjust the height, loosen the wing screw and

move the dress form to the desired location, then re-

tighen the wing screw.