Clean Water Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out Installation guide

Clean Water
Brand
Clean Water
Model
Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out
Type
Installation guide

This manual is also suitable for

Clean Water Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out can be used for a wide range of applications, including:

  • Disinfecting water: The tank can be used to disinfect water using chlorine or peroxide. This is an important step in ensuring that your water is safe to drink.
  • Removing impurities: The tank can also be used to remove impurities from water. This can improve the taste and smell of your water, and it can also help to protect your plumbing system from damage.
  • Storing water: The tank can also be used to store water. This can be useful in case of an emergency, or if you simply want to have a supply of clean water on hand.

Clean Water Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out can be used for a wide range of applications, including:

  • Disinfecting water: The tank can be used to disinfect water using chlorine or peroxide. This is an important step in ensuring that your water is safe to drink.
  • Removing impurities: The tank can also be used to remove impurities from water. This can improve the taste and smell of your water, and it can also help to protect your plumbing system from damage.
  • Storing water: The tank can also be used to store water. This can be useful in case of an emergency, or if you simply want to have a supply of clean water on hand.
www.cleanwaterstore.com
Rev-091323
1
Models 1465, 1665, 2162, 2472
Series Contact Tank
The CWS Series Contact Tanks includes an internal baing system that allows uniform mixing
and improved contact time to meet a .3 minimum bae factor, as set by many health agencies.
The distribution system in our tank provides for water to enter the top of the tank, distribute at
the bottom of the tank, and exit at the top of the tank, providing maximum contact time.
Operating Conditions
Maximum operating pressure: 10 bar (125 psi)
Operating temperature range 1 - 500 C (34 - 1200 F)
Material of Construction
All materials of construction in contact with water are food grade materials.
Inner shell (liner): polyethylene (PE)
Outer shell: Premium berglass embedded in epoxy resin
Inlet inserts are made of injection molded glass reinforced thermal plastic.
Contact Retention Tank Flow Diagram
www.cleanwaterstore.com
Rev-091323
2
Piping Guide
1. Attach in-out head to top Of tank. DO not use thread tape, sealant, or
lubricant on adaptor ttings going into the Top or Bottom of the tank,
as it uses an O-ring seal. Lubricate O-ring with silicone lube only.
2. For chlorine/peroxide/soda ash mixing contact tanks: connect the inlet
piping to the inlet port that feeds the center tube going into the tank.
Use Teon tape on the pipe ttings and/or Teon pipe joint compound.
3. Connect the Outlet piping to the Outlet port on the top tting Of
the contact tank using exible lines. DO not hard pipe.
4. Install a vacuum relief valve to a tee on the inlet pipe to the
contact tank.
5. Install a PVC or other ball valve on the bottom of the tank to be able to
drain down the tank period-cally.
6. Every few months or as needed, open the valve at the bottom and ush
the tank under pressure to ush out any accumulated sediment
NOTE: Do not attach rigid copper or steel pipe to tank without using exible
connectors. Use ex lines on the IN and OUT if using rigid copper or steel piping.
Contact tank may expand and contract during changes in line pressure, causing
damage to tank if installed using rigid piping with no ability to ex slightly. We
have ex lines if you need to order some.
More information
Call us: 831-462-8500, or
Email us: [email protected]
Model Height Width Pipe Size Distributor Tube Size
cws-1665 75.5" 17" 1-1/2" 1-1/2"
cws-2162 22.5" 2" 1-1/2"
cws-2472 87.5" 26" 2" 1-1/2"
  • Page 1 1
  • Page 2 2

Clean Water Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out Installation guide

Clean Water
Brand
Clean Water
Model
Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out
Type
Installation guide
This manual is also suitable for

Clean Water Contact Retention Tank Chlorine or Peroxide 1465 40 Gal. 1" In-Out can be used for a wide range of applications, including:

  • Disinfecting water: The tank can be used to disinfect water using chlorine or peroxide. This is an important step in ensuring that your water is safe to drink.
  • Removing impurities: The tank can also be used to remove impurities from water. This can improve the taste and smell of your water, and it can also help to protect your plumbing system from damage.
  • Storing water: The tank can also be used to store water. This can be useful in case of an emergency, or if you simply want to have a supply of clean water on hand.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents