2. Task Force Tips
  3. M-R1250-NN
M-R1250-NN

Task Force Tips M-R1250-NN Operating instructions

  • Hello! I have reviewed the instructions for the Task Force Tips Fire Fighting Nozzle Master Stream 1000. This document details the final assembly process, specifically focusing on the proper application of labels on the shaper and barrel. I'm here to assist with any questions you might have about these instructions.
  • Where should the name label be installed?
    How should the bottom edge of the name label be aligned?
    Which edge of the barrel label should be placed towards the inlet?
©Copyright Task Force Tips, Inc. 2013 LIX-036 July 16, 2013 Rev00
INSTRUCTIONS:
RUSSIAN MASTER STREAM
FINAL ASSEMBLY
TASK FORCE TIPS, INC.
MADE IN USA • www.tft.com 3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
Install the Barrel Label on Barrel
with “FOG” edge placed against
the edge of the label groove
towards the inlet.
Install the appropriate name
label to shaper.
Align bottom edge of the
Label against lip at bottom
of label groove on Shaper.
/