2. DANCO
  3. 88349

DANCO 88349 Operating instructions

  • Hello! I've reviewed the Installation Instructions for the Tub Drain Gasket. This document provides a simple, step-by-step guide on how to replace your tub drain gasket using only pliers, and is particularly helpful because it gives instructions in both English and Spanish. I'm happy to answer any questions you might have about the installation process.
  • What tool is required for the installation?
    What is the first step in the installation process?
    What should I do after removing the old drain?
A
C
D
B
Visit
for Easy D.I.Y. Solutions
DANCO.COM
©2023 Manufactured for
Danco, Inc., Irving, TX 75062
88349i
INSTALLATION INSTRUCTIONS
FOR TUB DRAIN GASKET
Instructions
Tools Required: Pliers
1. Empty water from bath tub.
2. Remove old plug (A) by pulling up or unthreading
depending on style of plug.
3. To remove bath drain (B), insert pliers (D) with handle
down into drain so that handle of pliers engage cross
pieces of drain. Using pliers as a wrench, unthread bath drain.
4. Remove worn gasket (C) and replace with new Danco gasket.
5. Reassemble drain in reverse order.
Instrucciones
Herramientas necesarias: pinzas
1. Vaciar la tina.
2. Retirar el tapón usado (A) tirando hacia arriba
o desenroscando, dependiendo del estilo de tapón.
3. Para remover el dren de la tina (B) insertar las pinzas (D)
en el dren con el mango hacia abajo para que éste enganche
la cruceta en el dren. Usando las pinzas como llave de tuercas,
desenroscar el dren de la tina.
4. Retirar la empaquetadura desgastada (C) y reemplazar con la nueva
empaquetadura Danco.
5. Volver a armar el dren en el orden inverso.
/