L.A. Steelcraft LA-PN203-RB21, LA-PN204-RB21 Installation guide

  • Hello! I have reviewed the provided installation instructions for the LA-PN204-RB21 Caster/Frame Pad. The document provides detailed steps on how to install the transport system, including mounting the wheels and frame pads. It also specifies the materials used, like the plastic pads and the type of hardware required. I'm ready to answer any questions you may have about the installation process or the components.
  • What are the frame pads made of?
    How are the frame pads attached?
    How many washers are used for each caster wheel?
    What should you do if there is interference of the caster wheel rotation?
A
B
C
DETAIL A
2
5
5
4
DETAIL B
5
DETAIL C
3
1
5
4
INSTALLATION INSTRUCTIONS
:
Install transport system: mount the wheels and frame pads as shown. Frame pads are made of
2-1/2" x 1" thick plastic. Pads have counter sunk holes and are attached with flathead bolts.
Caster wheels with brakes are 1" thick x 4" high wheels on a swivel base.
Each caster wheel gets (2) washers and a nut.
If there is interference of the rotation of the caster wheel, remove a washer from caster wheel.
PRODUCT NAME
TIP AND ROLL WHEEL CASTER/FRAME PAD
INSTALLATION INSTRUCTIONS
MODEL NO.
LA-PN204-RB21
Date: 11/11/22
Rev:
Drawn: CW
Sheet: 1 of 1
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
1
2
3
4
5
VCITIPNROLLSPACER
2.5" X 1.0" UHMW ROLLER SPACER PAD
12
VCITPNRCWL
CASTER WHEEL WITH BRAKE 3/8-16 x 1-1/2" STEM x 4"
8
HWFLHD38114
3/8-16 x 1-1/4" FLAT HEAD SOCKET CAP SCREW 18.8
12
HWLN38
3/8-16 NYLOCK INSERT NUT
18
HWFLWA38
3/8" FLAT WASHER
25
/