Baxton Studio LSG816L-Grey-LFC SF Assembly Instructions

Brand
Baxton Studio
Model
LSG816L-Grey-LFC SF
Type
Assembly Instructions
CB
A
E
D
ASSEMBLY INSTRUCTION
MODEL: 816 L shape
Assembly Part Description Loveseat Chaise
AMetal Leg 4 PCS 4 PCS
BBolts 16 PCS 16 PCS
CAllen Key 1 PC
DSupport Leg 1 PCS 1 PCS
EPlastic Washer 1 PCS 1 PCS
STEP 1:
Place (A) the metal leg on the bottom of
the sofa. Make sure the hole at the metal
leg tally with the hole on the bottom of the
sofa. Tighten the metal leg with (B) the
bolts by using (C) allen key. Repeat the
same methode until all the legs been
assembled.
STEP 2:
When all the legs have been
assembled, connect the sofa and
chaise with hooks. The 2 sets of iron
corner brackets together. Please refer
as above diagram.
Cleaning (Code "X")
Clean this fabric only by
vacuuming or light brushing
to prevent accumulation of
duct or grime. Water-based
foam cleaner or solvent
based cleaning agents of
any kind may cause
excessive shrinking, staining
or distortion of the surface
pile and, therefore,should not
be used.
FOR FABRIC CLEANING
( Code "WW")
- Use water based
agents only.
- Do not use solvents.
- Gently remove stains
by blotting or hang washing.
- Do not use excessive
brushing or rubbing.
  • Page 1 1

Baxton Studio LSG816L-Grey-LFC SF Assembly Instructions

Brand
Baxton Studio
Model
LSG816L-Grey-LFC SF
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents