Schulte XH1500 Series Features

Type
Features
GO NUMBER ONE! GO SCHULTE!
Schulte Flex Arms...
Flex Your Mower’s
- Shown with XH1500 Series 3 -
Please call: 1 (800) 404-6044 for more information on our complete line of Rock Removal Equipment,
Rotary Mowers, Snow Blowers, 3-point & Skid Mounted Backhoes & Rear Mounted Boom Mowers
Schulte Industries Ltd. Englefeld SK, CANADA
Phone:(306) 287-3155 Fax:(306) 287-3355 e-mail: [email protected]
1. Direction of Travel Schulte cutters are built to follow traffic direction, throwing grass down the ditch 2.
Side to Side Movement Castor wheels move the cutter from side to side for more efficient cutting around
obstacles 3. Backing up is a Breeze A strut attached between the Flex Arm and cutter keeps unit from jack
knifing when backing up. 4. Only one CV Shaft There is no pivot between the Flex-Arm and the cutter 5.
Only one Tire Track to Clean Up Blade sets overlap and create updraft to completely clean up tire tracks in
the grass and improve mowing performance in both dry and wet conditions. 6. Safety Improved visibility &
reduced rollovers 7. 1000 RPM or 540 RPM Either RPM can be run through the Flex Arm 8. Side Draft
Elimination The left castor wheel is located on the topside of the road virtually eliminating side draft.
9. Less Tractor Repairs Fewer punctured tires and worn out wheel bearings from driving on ditch slope
10. Happy Operators Reduced health insurance claims for sore backs and necks. Healthy operator =
productive worker Please visit schulte.ca for more details
Why is the Schulte Flex Arm the offset hitch to buy?
  • Page 1 1

Schulte XH1500 Series Features

Type
Features

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI