Vemer Dafne Wi-Fi User manual

Brand: Vemer

Model: Dafne Wi-Fi

Type: User manual

Digital

chronothermostat

Dafne Wi-Fi

User manual

PDF

English

- 1 -

Dafne Wi-Fi Chronothermostat User Manual

Index

Q Safety warnings Page 4

Q Connection diagrams Page 4

Q Mounting Page 5

Q Technical characteristics Page 13

Q Display and keyboard Page 14

Q Package content Page 15

Q Installation and setup Page 16

Q Remote control conﬁguration Page 18

Q App description Page 20

Q How to do in case of replacement of the access point Page 25

Q How to remove the device from your account Page 25

Q Conﬁguration without remote control Page 26

Q Programming menu Page 28

- Time and date modiﬁcation Page 28

- Programs modiﬁcation Page 29

- Temperatures modiﬁcation T1, T2, T3 Page 30

- Timing setting Page 32

- Advanced functions menu Page 33

Q Manual operation Page 39

Q Off operation Page 40

Q Backlighting management Page 41

Q Minimum and maximum values Page 41

Q Summer time change Page 42

Q Regulation type Page 44

Q Timings: what they are Page 46

Q Winter preset programs Page 48

Q Summer preset programs Page 49

Q Device reset Page 50

Q Reference standards Page 50

English

- 2 -

Dafne Wi-Fi Chronothermostat User Manual

Dafne Wi-Fi digital chronothermostat

Wi-Fi chronothermostat with flush-mounting installation on 3-module box (type 503),

controlling heating and air conditioning systems.

The device, through the bistable relay, acts on the control circuit of the burner or the

circulation pump (heating), or on the control circuit of the conditioner (air conditioning),

in order to guarantee the desired temperature.

The backlight can always be switched off if the device is installed, for example in

bedrooms.

The integrated Wi-Fi module allows you to control the device remotely using your

smartphone or tablet. It is necessary to connect the device to the home router and

install the appropriate app on your smartphone or tablet, available free of charge for

iOS and Android devices.

The device connects to the Vemer cloud to check if there are any changes to the

configuration and schedule created using the app, and if so, adjusts the temperature

according to the new configuration.

This operation occurs approximately once per minute.

These instruments perform actions of 1B type and are intended for operating in

environments Pollution degree 2 and Overvoltage Category III (EN 60730-1).

Code Model Description

VE792200

Dafne Wi-Fi Weekly chronothermostat with Wi-Fi

Cloud Vemer

Dafne Wi-Fi Access Point App

English

- 3 -

Dafne Wi-Fi Chronothermostat User Manual

• Summer, winter or off operation mode

• White and grey anthracite covers

included in the package. Available

as an accessory in silver color

(VE601100) or compatible with the

BTicino Living Now civil series in

white, black or sand

• 230V power supply

• 7 programs available for heating

operation

7 programs available for cooling

operation

• Integrated Wi-Fi module that allows

you to remotely control the device

using your smartphone or tablet (it

is necessary to connect the device

to the home router and install the

appropriate app on your smartphone

or tablet, available free for iOS and

Android devices).

• Flush mounting in three modules box

(503 type)

• Weekly programming with 3

settable temperature levels

English

- 4 -

Dafne Wi-Fi Chronothermostat User Manual

CONNECTION DIAGRAMS

COM

NO NC

230Va

123 45

Q During installation and operation product it is necessary to observe the

following instructions:

1) The device must be installed by a qualified person, in strict compliance with

the connection diagrams.

2) Do not power or connect the device if any part of it is damaged.

3) After installation, inaccessibility to the connection terminals without

appropriate tools must be guaranteed.

4) The device must be installed and activated in compliance with current electric

system standards.

5) Before accessing the connection terminals, verify that the leads are not live.

6) In the electrical system of the building where the device must be installed, a

protection device from the overcurrents must be present.

SAFETY WARNINGS

English

- 5 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Bticino Living series, Light, Light Tech, Livinglight, Axolute

Vimar Eikon series, Eikon Evo, Plana

Ave S44 series – ABB Mylos series

English

- 6 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

ABB Chiara series

Vimar Arké series

English

- 7 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Gewiss Chorus series

Remove the cogs

English

- 8 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Bticino Matix series

Remove the cogs

English

- 9 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Vimar Idea series

English

- 10 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Bticino Livinglight AIR series

AIR

* Note: if the box extension is not present (adapter which increases the

depth of the flush-mounting box) we recommend you using the frame

for Livinglight AIR installation

English

- 11 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Bticino Axolute AIR series

AXO AIR mount not included in the package, purchasable as an accessory.

AXO AIR

English

- 12 -

Dafne Wi-Fi Chronothermostat User Manual

DAFNE WI-FI MOUNTING

Bticino Living Now series

Vemer frame and front panel not included in the package, which can be purchased as

accessories with dedicated mounting KIT.

FRONT PANEL

VEMER

FRAME

VEMER

English

- 13 -

Dafne Wi-Fi Chronothermostat User Manual

• Power supply:

– 230 Vac (±15%) 50/60Hz

– maximum consumption: 1 W (2,5 VA)

• Backup battery for time keeping in case of power outages

• Flush-mounting in 3 modules box

• Terminal block:

– 3 terminals for 1.5 mm² cables for bistable output relay 5A / 250 Vac

– 2 terminals for 1.5 mm² cables for power supply

• Temperature regulation:

– On/Off with settable differential between 0.1°C and 1°C

– Proportional with settable band and period

• Summer/Winter/Off operating mode

• Weekly programming (7 programs available for each operating mode)

• Daily resolution: 1 hour (possibility to set delays activation of 15, 30, 45 minutes

independent for each hour)

• 5 settable temperatures:

– T1, T2, T3 in automatic operation

– Tm in manual operation

– Toff in off mode (antifreeze)

• Measured temperature display: 0 ÷ 50 °C

• Measurement precision: ±0,5 °C

• Measured temperature resolution: 0,1°C

• Setpoint range: 2 ÷ 50 °C

• Clock precision: ±1 second/day

• Key lock by password

• Backlight display (desactivable)

• Operating frequency band: 2,4 GHz IEEE 802.11 b/g/n

• Maximum radio frequency power transmitted: 20 dBm

• Automatic summer/winter time change (deactivatable with configuration without

remote control)

• Operating temperature: 0 ÷ 50 °C

• Storage temperature: -20 ÷ 65 °C

• Operating humidity: 20÷90% not condensing

• Protection degree: IP40

• Insulation: reinforced among accessible parts (frontal) and all other terminals

TECHNICAL CHARACTERISTICS

English

- 14 -

Dafne Wi-Fi Chronothermostat User Manual

① Day of the week (DAY 1 = Monday)

②

Programming menu:

Date/time and summer time setting

Programs modiﬁcation (for automatic operation)

Temperatures setting T1, T2, T3

Timings menu

Advanced programming menu

Synchronization with Vemer Cloud settings in progress

Active Wi-Fi network connection

③

Time and minutes

④

Load activation in summer/cooling mode

⑤

Program on graphic for the current day (in automatic operation)

⑥

Manual operation activation

⑦

Load activation in winter /heating mode

⑧

Measured environment temperature

⑨

Off operation

⑩

Temperature unit “° C”

⑪

Icons group:

Not used

Local mode

Keypad lock or local operation not enabled

DISPLAY AND KEYBOARD

English

- 15 -

Dafne Wi-Fi Chronothermostat User Manual

PACKAGE CONTENT

chronothermostat

covers and plastic elements are available in white and grey anthracite colours

covers

plastic

elements

plastic

elements

mount A

mount B

mount AIR

Q Keyboard

The keys carry out different functions on the basis of the instrument status

and they will be described step by step in this user manual.

There are two types of pressure:

- brief pressure

- long pressure, with duration higher than 3 seconds

Q Cleaning the display

To clean the display use a soft, lint-free cloth, without using excess force.

English

- 16 -

Dafne Wi-Fi Chronothermostat User Manual

INSTALLATION AND SETUP

Preliminary operations

If you intend to use the device with remote control, before proceeding with the

installation and conﬁ guration make sure you have a Vemer account available.

To create a Vemer account, do the following:

1. Install and start the Clima Wi-Fi app on your smartphone (or tablet)

2. Choose “Register” and ﬁ ll in the “e-mail” and “password” ﬁ elds

Note: for security reasons it is recommended to choose a password different

from the one used to access your e-mail box

3. Check your e-mail box: conﬁ rm the activation of the account by clicking

on the link contained in the e-mail sent by the system

4. Log in by entering the e-mail address and password chosen in the registration

process

English

- 17 -

Dafne Wi-Fi Chronothermostat User Manual

Installing the device.

• Install the device at a height of about 1.5 m from the ﬂ oor, in an area that reﬂ ects

as much as possible the average temperature conditions of the room.

Avoid installation near doors or windows, in niches, behind doors and curtains

or in places with excess or total lack of ventilation.

• Mount the white or anthracite gray frame according to your preferences by hooking

it to the special teeth on the device (with the BTicino Living Now series, do not

mount any frame and follow the instructions in the mounting KIT, which can be

purchased as an accessory).

• Make the connections in compliance with the diagrams shown in this manual.

• Fix the device inside the 3 modules box in compliance with the assembly diagrams

described at the beginning of this manual. The accessories for the installation

included in the package allow the mounting of the plates described in the diagram

“adjustable plates” and they are:

- mount A

- mount B (according to the needs it could be necessary to remove the side cogs)

- mount AIR

- couple of BM side plastic elements (both of white colour and grey colour)

- couple of VI side plastic elements (both of white colour and grey colour)

- covers of white colour and anthracite grey colour.

• Power up the device which, upon ﬁ rst start-up (or after a default reset)

will turn on all segments of the LCD display for about 3 seconds and the relay

will perform the OFF-ON-OFF sequence, after which the screen will appear:

• Proceed with the device conﬁ guration described below.

English

- 18 -

Dafne Wi-Fi Chronothermostat User Manual

REMOTE CONTROL CONFIGURATION

Conﬁguring the remote control device (for Android)

To conﬁgure the device after the ﬁrst power on or after a factory reset using an Android

smartphone, proceed as follows:

1. While the screen shown on page 17 is displayed, press the or key to

choose 1HW21 and the key to conﬁrm (failure to choose within 30 seconds

is equivalent to choosing 1HW21).

2. Make sure the device displays “ &RQIQ(W”.

If this is not the case, hold down the and keys simultaneously until the

display shows &RQIQ(W and the icon starts ﬂashing (wait for it to become

steady before proceeding with the next point).

3. Start the app, choose “Add. Thermostat ”and select the Dafne model among

those available. The procedure guides the user through the conﬁguration

of the Dafne Wi-Fi.

4. Select the “

iwm...

” network to connect to the network generated by the device.

Wait for the device display to show the icon to indicate the successful

connection between the app and the device.

5. On the next screen, choose the home Wi-Fi network to connect the Dafne Wi-Fi to.

Enter the password of the home Wi-Fi network and conﬁrm.

Important: before proceeding make sure that the

icon on the device display

is still on. Otherwise, access the Wi-Fi settings of the smartphone to manually

reconnect to the “iwm ...” network.

6. Enter a name that identiﬁes the Dafne Wi-Fi and choose an icon to help identify

the device from those proposed. Conﬁrm with “Save”.

The conﬁguration procedure is ﬁnished. At this point:

the app displays the list of devices associated with your account

among which also the newly associated device must appear.

Dafne Wi-Fi displays the main screen.

Check that the icon and that the time shown at the top left is correct.

Page is loading ...

Vemer Dafne Wi-Fi User manual

Vemer Dafne Wi-Fi User manual

Vemer Dafne Wi-Fi User manual

Related papers

Other documents