Chloride CLC, CLX, Compac CLC Exit/Unit Combo, Compac CLC LED Exit/Emergency Unit, Compac CLX Exit, Compac CLX LED Exit Sign Install Instructions

  • Hello! I've reviewed the instructions for the CLXA, CLXN, and CLXN-with Remotes emergency lights. This document provides important safety information, mounting instructions, wiring diagrams, and information about connecting remote heads. I am ready to answer any questions you might have about these devices.
  • What is the maximum mounting height for these units?
    What should I do if the LED heads or indicator do not illuminate?
    How do I connect remote heads?
Jumper connector
Female connector
Wire nuts
Extended remote wires
Remote wires
Remote male connector
Female connector
© 2018 Signify Holding. All rights reserved. This document contains information
relating to the product portfolio of Signify which information may be subject to
change. No representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in reliance
thereon is disclaimed. The information presented in this document is not
intended as any commercial offer and does not form part of any quotation or
contract. All trademarks are owned by Signify Holding or their respective owners.
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873, USA
Tel. 855-486-2216
www.chloride-lighting.com
/