Mini Bubbler Jukebox with CD
WR18
Instruction Manual
910-995200-022
IMPORTANT SAFETY INSTRUCTION
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
13. Lightning - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
AC
Polarized Plug
10
WARRANTY
Crosley Radio Products are warranted against defects in material and workmanship
for a period of 90 days beginning from the date of sale to the original purchaser.
Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Crosley Radio customer service for
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to
Friday.
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $19.95 made out to Crosley
Radio to cover the handling and return postage. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
LOUISVILLE, KY 40299
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold AS
IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
9
Troubleshooting
Bubble tubes not bubbling?
1 Make sure lights are on.
2 It takes approximately 15 to 20 minutes fro the
bubble tubes to warm up after the lights are on.
3 If the lights have been on at least 20 minutes
and the tubes are still not bubbling, very lightly
tap on the Brown plastic at the bottom of the
radio with your hand. Only tap very gently and
never tap on the tube itself as it could case the
tube to break.
There’s no sound?
1 Make sure the mute function is turned off.
2 Check that the volume is turned up by pressing
vol.+ button on remote.
3 Make sure ext. / int. switch on back of radio is
on int.
(unless you are using external speakers, in which
case it should be on ext.)
4 Check to make sure power is turned on.
CD does not play?
1 Check to make sure CD is inserted correctly
(label side facing up).
2 Check to see that surface of CD is clean.
3 Make sure radio is on CD function by pressing
CD / Radio button.
Remote not working?
1 Replace batteries.
2 Be sure and point remote towards remote sensor
when using.
3 Remove obstacles in the path of the remote and
the radio so that remote signal has a straight
path to the radio.
General
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Frequency Range : FM 87.5 - 108.5 mHz
Power Source : AC 120V ~ 60Hz
Power Consumption : 30W
Antenna : External Antenna of FM
Speaker : 4” Dynamic Type x 2
Speaker Wattage : 5 W
Speaker Ohm : 4 Ohm
Output Ohm : 4 Ohm
Output Wattage : 2W per channel
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
CD Player
Programmed CD Playback
Getting Started
Control Locators................. 4,5
Unpacking........................... 6
Power Source..................... 6
Basic Operation
Light / Bubble Tubes........... 7
Remote Control................... 7
FM Stereo Operation.......... 7
Connecting Optional Equipment
External Speakers.................... 7
Auxiliary Inputs......................... 7
CD Operation
CD Player............................ 8
Programmed CD Playback.. 8
General
Troubleshooting Guide........ 9
Warranty............................... 10
Thank you for purchasing the the Crosley Mini
Bubbler Jukebox with CD (WR18). Before operating
this unit, please read this manual thoroughly and
retain it for future reference.
Instuctions in this manual describe the control
functions of the WR18.
8
About This Manual
Welcome Table of Contents
1 Make sure the power is on.
2 Push CD / RADIO BUTTON (25). The CD
display will show (- -).
3 Push OPEN / CLOSE BUTTON (27) on remote
to open CD DRAWER (12) .
4 Insert CD in tray with the label side of CD
facing up.
5 Push the OPEN / CLOSE BUTTON (27) again
to close the CD DRAWER (12).
6 Push PLAY / PAUSE BUTTON (26) on remote
to begin playing the CD.
7 To stop playing, push the STOP BUTTON (22)
on remote.
8 To skip to different tracks, push the BACK
SKIP (21) or FORWARD SKIP BUTTON (29)
on the remote. The FORWARD SKIP BUTTON
(29) will go numerically through tracks forward
and the BACK SKIP BUTTON (21) will go
backwards.
9 By pressing and holding either the BACK SKIP
(21) or FORWARD SKIP BUTTON (29), you
can rewind or fast forward through each
individual tack. The track will fast forward or
rewind as long as you are holding the button.
Once you let off the button, regular playback
resumes.
10 During playback, you can use the REPEAT
BUTTON (23) to repeat an individual song or
the whole CD. While a song is playing, push
the REPEAT BUTTON (23) on the remote.
You will see the repeat light on the radio start
flashing. This means that once the song is
over, it will automatically start playing that song
again. Pushing the REPEAT BUTTON (23)
twice will make the repeat light come on without
flashing. When the whole CD is finished, it will
automatically start from the very beginning of
the CD and play it again. Pushing the REPEAT
BUTTON (23) once more will disable the repeat
function and CD will stop playing at the end
of the disc.
CD Operation
The CD player in this unit is programmable. This
means you can program it to play only selected
tracks on the selected CD.
Follow instruction below to program the CD player.
1 Insert disc and close CD DRAWER (12). Do
not push play yet.
2 Push the PROGRAM BUTTON (24) on the
remote. The program light on the radio will
start flashing.
3 Use the BACK SKIP (21) or FORWARD SKIP
BUTTON (29) to select a track you want to
program.
4 Once you have selected a track, push the
program button again. This stores the track
into memory.
5 Use the BACK SKIP (21) or FORWARD SKIP
BUTTON (29) to select the next track you want
to program. Once selected, push the program
button again.
6 Repeat step number 5 until you have
programmed all desired tracks.
7 Push PLAY / PAUSE BUTTON (26) to begin
playing the selected tracks. The program light
will stop flashing and the selected tracks will
begin playing. They will play in the order that
they were programmed.
8 Using the BACK SKIP (21) or FORWARD
SKIP BUTTON (29) will only skip through the
programmed tracks.
9 To clear programmed tracks, push the stop
button on the remote control twice until the
program light goes out.
10 Programmed tracks will also be erased from
memory when the CD DRAWER (12) is opened
or when the power is turned off.
Lights / Bubble Tubes
FM Stereo Operation
Remote Control
7
4
Control Locators
Unit Controls
1 FM Tuner
2 Tuning
3 Light On / Off
4 Power On / Stand By
5 Program Indicator
6 Repeat Indicator
7 Play / Pause Indicator
8 Mute Indicator
9 Remote Sensor
10 Stand By Indicator
11 Power Indicator
12 CD Drawer
13 Remote Holder
14 Speaker Int. & Ext.
15 Speaker Jacks
16 FM Antenna
17 A/C Power Cord
18 Line In Jack
19 Line In ON/OFF Switch
Basic Operation
Connecting Optional Equipment
1 Gently pull on top right side of tuner door to open.
2 Push light button in to turn lights on.
3 Bubble tubes will begin to bubble in approximately
15-20 minutes after lights are turned on.
4 Bubble tubes will not bubble unless lights are on.
1 The remote controls both the radio and the CD
player.
2 Use power button to turn unit on or off (standby).
3 Vol + (30) and Vol – (31) are used to raise or
lower volume.
4 CD / RADIO BUTTON (25) switches between
radio and CD operation.
5 The MUTE BUTTON (28) is used to mute volume
completely.
6 The other remote functions are used for CD
controls and will be discussed under CD operation.
1 Turn power on using either the remote or power
button located behind tuner door.
2 Push CD / RADIO BUTTON (25) to enable FM
tuner.
3 Turn FM dial to desired station.
4 Position FM ANTENNA (16) for best reception.
5 Set volume to desired listening level.
4
2
3
1
1 This radio is equipped with external speaker
outputs.
2 The speaker jacks for external speakers are
located on the back of the radio. Beside the
speaker jacks is a switch labeled (int./ext.) When
using external speakers, this switch must be
switched to the ext. position. Doing this turns off
the internal speakers in the radio and redirects
to power to the external speakers.
3 If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
1 You can connect external components to your
unit by using the Auxiliary Inputs.
2 Plug Auxiliary cables (not supplied) into the
INPUT JACK (18) on the back of your unit.
3 Switch the LINE IN ON/OFF (19) to the ON
position.
4 Plug the other end of the Auxililary cables into
the output jack on your desired external
component.
5 Check the volume level of your external
component.
6 See operators manual for correct operation of
the external component.
External Speakers
Auxiliary Inputs
10
11
8
9
5
6
7
12
18
19
15
14
16
13
17
EXT.
SPEAKER
R
R
L
L
+ +
_ _
INT. EXT.
Impedance: 4 Ohm 5 W
Getting Started
Unpacking
1 Remove packing materials from unit.
Note: Save all packing materials.
2 Remove plastic safety cover from A/C plug.
3 Remove tie from A/C cord
4 Open lid and remove styrofoam shipping
material from turntable.
Power Source
1
Unwind the AC POWER CORD (17) at the back
of the unit and connect it to a power outlet.
2 Plug A/C cord into appropriate outlet.
Note: This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
3 Install 2 AAA batteries (not included) in
remote control.
4 Plug A/C cord into appropriate outlet.
6
5
Control Locators
Remote Controls
20 Power
21 Back Skip
22 Stop
23 Repeat
24 Program
25 CD / Radio
26 Play / Pause
27 Open / Close
28 Mute
29 Forward Skip
30 Volume Up
31 Volume Down
AC
Polarized Plug
20
21
22
23
24
25
26
27
28
29
30
31
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Crosley Crosley Autorama CD User manual
-
Crosley Radio CR31 User manual
-
-
-
-
-
-
-
-
Other documents
-
-
-
-
-
-
-
-
-
-