Ideal 85-079 User manual

Brand: Ideal

Model: 85-079

Type: User manual

1) Use coax stripper to

strip cable so ¼” of

conductor and ¼” of

braiding are exposed.

(45-605 shown)

3) Using a cable cutter or

sharp edge tool, gently

score the outer foil at the

base of the coax jacket by

rotating blade.

(45-074 shown)

2) Fold back braiding, make sure

no braids are touching the

center conductor. Straighten

conductor if needed.

4) Find the seam/edge of the foil

and peel it off. Discard the foil.

©2016 IDEAL INDUSTRIES, INC

IDEAL RG6-Quad Shield Coax Cable Prep Instructions

¼”

¼”

Quad cable has an extra foil and extra

braid layer, making the cable thicker than

standard dual/regular RG6 cable.

The extra layers provide additional

protection from outside signal

interference and signal leakage from the

cable itself. (EMI/RFI)

Removal of the outer foil layer and

folding down the inner braiding layer

makes it easier to push connectors on

to RG6 Quad coax without

compromising the quality and integrity

of the cable or connector.

1) Prep

2) Fold Outer

4) Remove Foil

5) Fold Inner

Score here

Keep inner

foil intact

3) Score Foil

5) Fold the inner braiding down on

top of the outer braiding. Keep inner

foil in tact on dielectric.

1

Ideal 85-079 User manual

Brand: Ideal

Model: 85-079

Type: User manual

Download PDF

Related papers

Other documents