Sony ICD-UX512F Quick start guide

Type
Quick start guide

This manual is also suitable for

2
GB
CAUTION
Risk of explosion if battery is replaced by an incorrect
type.
Dispose of used batteries according to the instructions
of batteries.
Precautions
On power
Operate the unit only on 1.2 V or 1.5 V DC.
Use one NH-AAA rechargeable battery or one
LR03 (size AAA) alkaline battery.
On safety
Do not operate the unit while driving, cycling or
operating any motorized vehicle.
On handling
• Do not leave the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
• Should any solid object or liquid fall into the
unit, remove the battery and have the unit
checked by qualified personnel before operating
it any further.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
This Quick Start Guide describes only basic
operations, such as how to record, play back, or
erase files. The operating instructions
explaining all the features and functions of
the IC recorder are stored as PDF files in 7
languages in the built-in memory of the IC
recorder. To copy the operating instructions
from the IC recorder to your computer, see
“Step 6: Copying the Operating Instructions to
Your Computer” on page 6.
You can also get another copy of the operating
instructions from the Sony support home page:
http://www.sony-asia.com/section/support
Moreover, to install the supplied application
software (Sound Organizer), refer to the
operating instructions stored as PDF files.
For details on using the Sound Organizer
software, visit its help files.
3
GB
Getting Started
Step 1: Checking the
Contents of the Package
IC Recorder (1)
Remove the film on the display window before you
use the IC recorder.
Stereo headphones (1)
USB connection support cable (1)
If the IC recorder cannot be connected to a computer
directly, use the supplied USB connection support
cable.
Telephone recording microphone (1)
(for ICD-UX513F only)
Application software, Sound Organizer
(CD-ROM) (1)
Carrying pouch (1)
NH-AAA (size AAA) rechargeable
battery (1)
Battery case (1)
Operating Instructions
The operating instructions are stored as PDF files in
the built-in memory of the IC recorder.
Step 2: Recharging the
Battery
Recharging the battery using a
computer
1 Insert a rechargeable battery.
Slide and lift the battery compartment lid, insert
one NH-AAA rechargeable battery with correct
polarity, and close the lid.
2 Connect the IC recorder to your computer.
Slide the USB slide lever on the back of the IC
recorder in the direction of the arrow, and insert
the USB DIRECT connector into the USB port
of a running computer.
3 Disconnect the IC recorder from your
computer.
Follow the procedures below; otherwise, when
the IC recorder contains data files, the files may
be damaged or become unplayable.
1Make sure that the operation indicator of the
IC recorder does not light.
Computer
IC recorder
To USB port of
your computer
GB
4
GB
2Perform the following operation on your
computer.
On a Windows screen, left-click the icon at
the bottom of the desktop of the computer.
t Left-click “Eject IC RECORDER.”
The icon and menu displayed can be different on
different operating systems.
On a Macintosh screen, drag “IC
RECORDER” on the desktop to “Trash” and
drop it there.
For details on disconnecting the IC recorder
from your computer, refer to the operating
instructions supplied with your computer.
3 Disconnect the IC recorder from the USB
port of the computer, and slide the USB
slide lever in the direction of the arrow to
retract the USB DIRECT connector.
Step 3: Turning the IC
Recorder On
Turning the power on
Slide the HOLD/POWER switch in the direction
of “POWER” for more than 1 second. The IC
recorder is turned on, and the “Accessing...”
animation is displayed.
Turning the power off
Slide the HOLD/POWER switch in the direction
of “POWER” for more than 2 seconds, and the
“Power Off” animation is displayed.
5
GB
Step 4: Setting the Clock
You need to set the clock to use the alarm
function or record the date and time.
When you insert a battery for the first time, or
when you insert a battery after the IC recorder has
been without a battery for more than 1 minute, the
“Set Date&Time” animation appears, and then the
year section begins to flash in the clock setting
display window.
Setting the clock after
recharging the battery
1 Press v or V on the control button to set the
year, month, day, hour, and minute in sequence,
and then press
N/ENT.
Select the last two digits of the year when you
set the year.
2 Press x STOP to return to the stop mode
display.
Setting the clock using the
menu
Refer to “Setting the clock using the menu”
(page 14 in “Operating Instructions”).
Step 5: Setting the
Language to Be Used in
the Display Window
You can select the language to be used for
messages, menus, folder names, file names, etc.
from 11 languages.
1 Select the (IC recorder setting) tab t
“Language” in the menu, and then press
N/
ENT.
x STOP
N/ENT
v, V
x STOP
N/ENT
v, V
6
GB
2 Press v or V on the control button to select the
language that you want to use, and then press
N/ENT.
You can select the following languages.
Deutsch (German), English, Español (Spanish),
Français (French), Italiano (Italian), Русский
(Russian), (Japanese), (Korean),
(Chinese), (Chinese),
(Thai)
3 Press x STOP to exit the menu mode.
Step 6: Copying the
Operating Instructions
to Your Computer
1 Connect the IC recorder to your computer
(page 3).
2 Complete the following procedure on your
computer.
On a Windows screen; open “My Computer” or
“Computer,” - “IC RECORDER” -
“Instructions.”
On a Macintosh screen; open the “IC
RECORDER” drive on the desktop -
“Instructions.”
3 Drag and drop the files of the operating
instructions from “Instructions” folder to the
local disk on your computer.
The file names of the operating instructions are
as follows:
Product name_language name_version.pdf (e.g.
ICD-UX512F_UX513F_English_11.pdf)
4 Disconnect the IC recorder from your computer
(page 3).
7
GB
Basic Operations
Recording
z Tip
Before you start recording, we recommend you make a trial recording first, or monitor the recording.
Selecting a folder
1 Slide the HOLD/POWER switch towards the center to release
the IC recorder from the HOLD status.
2 Press to display the folder selection window.
3 Press . on the control button, press v or V on the control
button to select the (Voice) tab, and then press
> on the
control button.
4 Press v or V on the control button to select the folder in which
you want to record files.
When you purchase the IC recorder, there are 5 folders already
available ( FOLDER01-05).
5 Press N/ENT.
., >
v
, V
v
V
N/ENT
8
GB
Starting to record (Auto (AGC) recording)
To stop recording
Listening
Starting playback
1 Place the IC recorder so that the built-in microphones face the
direction of the source to be recorded.
2 Press z REC/PAUSE in the stop mode.
The operation indicator lights in red.
You do not need to press and hold
z REC/PAUSE while
recording.
The new file will be automatically recorded after the last
recorded file.
1 Press x STOP.
The “Accessing...” animation appears and the IC recorder stops
at the beginning of the current recording file.
1 Slide the HOLD/POWER switch towards the center to release
the IC recorder from the HOLD status.
2 Press .
Operation
indicator
z
REC/PAUS
E
x STOP
9
GB
3 Press . on the control button, press v or V on the control
button to select the (Voice) tab, the (Music) tab, or the
(Podcast) tab, and then press
> on the control button.
4 Press v or V on the control button to select the folder.
5 Press > on the control button.
6 Press v or V on the control button to select the file you want to
play.
7 Press N/ENT.
Playback will start soon, and the operation indicator will light in
green. (When “LED” is set to “OFF” in the menu, the operation
indicator does not light.)
., >
v
, V
v
V
>
v
V
Operation
indicator
N/ENT
10
GB
To stop playback
Erasing
P Note
Once a recording has been erased, you cannot retrieve it.
Selecting a file and erasing it
8 Press VOL –/+ to adjust the volume.
1 Press x STOP.
1 Slide the HOLD/POWER switch towards the center to release
the IC recorder from the HOLD status.
2 Select the file you want to erase when the IC recorder is in the
stop or playback mode.
3 Press ERASE.
“Erase?” is displayed and the specified file is played back for
confirmation.
VOL –/+
x STOP
ERASE
11
GB
To cancel erasing
4 Press v or V on the control button to select “Execute.”
5 Press N/ENT.
The “Erasing...” animation appears in the display window and
the selected file will be erased.
When a file is erased, the remaining files will advance so that
there will be no space between files.
1 Select “Cancel” in step 4 of “Selecting a file and erasing it,” and
then press
N/ENT.
v
V
N/ENT
N/ENT
6
CS
3 将操作说明的文件 “Instructions”
件夹拖放到电脑的本地磁盘上。
操作说明的文件名如下:
产品名_语言名_版本.pdf (如ICD-
UX512F_UX513F_English_11.pdf)
4 将IC录音机从电脑上断开 (第3页)
6
CT
步驟6:將操作說明複製到
電腦
1 將IC錄音機連接到電腦 (第3頁)
2 在電腦上完成以下步驟。
在Windows畫面上,開啟 “我的電腦”
“電腦”,- “IC RECORDER”-
“Instructions”
在Macintosh畫面上,開啟桌面上的 IC
RECORDER”磁碟機- Instructions”
3 將操作說明的檔案 “Instructions”
料夾拖放到電腦的本機磁碟上。
操作說明的檔案名稱如下所示:
產品名稱_語言名稱_版本.pdf (如ICD-
UX512F_UX513F_English_11.pdf)
4 從電腦上取下IC錄音機 (第3頁)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Sony ICD-UX512F Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages