PAC UPAC-NIS2 User manual

PAC
Brand
PAC
Model
UPAC-NIS2
Category
Car video systems
Type
User manual
Dipswitch 1 & 2 On (Down)
2007-2008 M35/45
uPAC-NIS2
iPod and Auxiliary Input
Interface with HD Radio Option for
Select Nissan/Infiniti Radios
The uPAC-NIS2 interface is a multi input media device compatible with select Nissan/Infiniti radios
that are Satellite Radio ready. The 2 inputs will support any of the following combinations:
iPod/Auxiliary, iPod/HD Radio (HD Radio tuner sold separately) or Auxiliary/HD Radio (HD Radio
tuner sold separately). The optional HD Radio tuner is part number uPAC-HDRT. The iPod input
can be used with full control from the radio or full control from the iPod. The uPAC-NIS2 also fully
retains factory installed Satellite Radio and Rear Seat Entertainment Systems.
Please visit www.pac-audio.com for a complete list of supported vehicles.
Configuring the uPAC-NIS2 (iPod and Auxiliary Input as devices):
All Dipswitches Off
2008 Armada/Pathfinder
2007-2008 G35
2007-2009 Maxima
2007-2008 Sentra
2007 QX56
Dipswitch 3 On (Down)
2007-2009 Altima
2005-2009 Rouge
2007-2009 Versa
The iPod cable should be connected to Device 1.
The Auxiliary Input cable should be connected to Device 2.
If both the 3.5mm cable and RCA connections are used make sure to only have one of
the 2 sources powered at a time.
Connecting to the vehicle:
With the key off, plug the 20 pin and 12 pin harnesses provided with the uPAC-NIS2 into the radio.
Plug the original 20 pin and 12 pin (if available) into the receptacle connectors provided with the
uPAC-NIS2. Make sure all other connectors (if any) are reconnected to the factory radio. Plug the
24 pin micro-fit cable into the uPAC-NIS2.
Note: If the optional HD Radio Tuner is used, refer to the uPAC-HDRT’s connection manual for configuration
and operation instructions. The USB connection has no function at this time.
***Important Note*** The 2007 G35 Coupe requires the uPAC-NIS1 interface.
01-06-2009
J1850
Class 2
VPW
Class 2
J1850
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Arbitration
EOD
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Class 2
Class 2
J1850
Pacific Accessory Corporation - Santa Ana, CA 92705
[email protected] • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
SEEK
TRACK
FILE
CAT
AUDIO
SCAN
PWR
VOL
PUSH
1
1
5
6
DISP
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
PWR
VOL
PUSH
1
1
1
SEEKREV
DISP
LOAD
PRESET A•B•C
CD
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
PWR
VOL
PUSH
1
1
1
TUNEREV
OR
RADIO
CLOCK
TUNE
FF•REW
FOLDER
AUX
6CD CHANGER
MP3
RPT
RDM
4
5
6
RADIO
DISP
LOAD
PRESET A•B•C
CD
RADIO
SEEK
TRACK
FILE
SCRL
AUDIO
PWR
PUSH
1
1
4
5
DISP
LOAD
PRESET A•B•C
CD
RADIO
CLOCK
TUNE
FF•REW
FOLDER
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
AUX
PWR
VOL
PUSH
6CD CHANGER
MP3
RPT
RDM
1
1
1
4
5
6
Selecting the Input:
Press the RADIO or AM/FM/SAT button a few times until SAT is displayed on the screen. Immediately
press the SEEK >> or SEEK button to scroll through the available sources. Once the
source you would like to select is displayed (IPOD or AUX), press the << TUNE or TUNE button to
select it.
If you are installing the uPAC-NIS2 into any of the following vehicles, the SEEK and TUNE buttons will have to be
configured in order for the interface to operate properly:
2007-2008 Sentra
2007-2008 Maxima
If you are installing the uPAC-NIS2 into any of the following vehicles, the SEEK button will have to be configured
in order for the interface to operate properly:
2007-2009 Versa
Configuring the SEEK button:
Press the RADIO button a few times until SAT is displayed on the screen. Immediately press the SCAN button until
SEEKREV is displayed. After six seconds the radio will time out and the SEEK button is now configured.
Configuring the TUNE button:
Press the RADIO button a few times until SAT is displayed on the screen. Immediately press the SCAN button until
TUNEREV is displayed. After six seconds the radio will time out and the TUNE button is now configured.
Nissan Operation
Important Conguration Process
01-06-2009
J1850
Class 2
VPW
Class 2
J1850
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Arbitration
EOD
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Class 2
Class 2
J1850
Pacific Accessory Corporation - Santa Ana, CA 92705
[email protected] • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the uPAC-NIS1 be held liable for consequential
damages sustained in connection with the uPAC-NIS1. The manufacture and it’s distributors will not, nor will they authorize any
representative or any other individual to assume obligation or liability in relation to the uPAC-NIS1 other than its replacement.
DISP
LOAD
PRESET A•B•C
CD
RADIO
CLOCK
TUNE
FF•REW
FOLDER
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
AUX
PWR
VOL
PUSH
6CD CHANGER
MP3
RPT
RDM
1
1
1
4
5
6
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
POWER
SEEK
SCAN
RADIO
CLOCK
AUX
CATEGORYCHANNEL
MIX
RPT
CD
2
3
5
6
TUNE
AUDIO
AUX
DISP
DISP
LOAD
PRESET A•B•C
CD
RADIO
CLOCK
TUNE
FF•REW
FOLDER
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
AUX
PWR
VOL
PUSH
6CD CHANGER
MP3
RPT
RDM
1
1
1
4
5
6
POWER
SEEK
SCAN
RADIO
CLOCK
AUX
CATEGORYCHANNEL
TRIP
INFO
MIX
RPT
CD
1
2
3
4
5
6
TUNE
AUDIO
AUX
DISP
A•B•C
PRESET
Browsing:
<< TUNE or TUNE Enters Browse Menu and moves forward to
the next step when pressed again.
OR
OR
OR
TUNE >> or TUNE Takes one step back in the Browse Menu
SCAN Exits the Browse Menu
Example of Operation (iPod full control):
Press the SAT button
Press the SEEK button until IPOD is displayed.
Press the TUNE button to select it.
Press the TUNE button, the radio will display: PL:LIST
Press the SEEK button until AR:ARTIST is displayed.
Press the TUNE button to select it.
Use the SEEK or SEEK buttons to select an artist.
Press the TUNE button to choose that artist.
Use the SEEK and SEEK buttons to select an album by
the previously selected artist.
Press the TUNE button to choose that album.
Use the SEEK and SEEK buttons to select a track from
the previously selected album.
Press theTUNE button to choose the track to be played.
The track will begin to play and you can select the next or
previous track by using the SEEK or SEEK buttons
on the radio.
IPOD
Controlling the iPod:
SEEK >> or SEEK advances 1 song in an album or playlist.
<<SEEK or SEEK moves back 1 song in an album or playlist.
Display options:
DISP selects what is to be displayed on the
radio (artist, song title or play counter).
DISP
LOAD
PRESET A•B•C
CD
RADIO
CLOCK
TUNE
FF•REW
FOLDER
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
AUX
PWR
VOL
PUSH
6CD CHANGER
MP3
RPT
RDM
1
1
1
4
5
6
DISP
LOAD
PRESET A•B•C
CD
RADIO
CLOCK
TUNE
FF•REW
FOLDER
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
AUX
PWR
VOL
PUSH
6CD CHANGER
MP3
RPT
RDM
1
1
1
4
5
6
DISP
LOAD
PRESET A•B•C
CD
RADIO
CLOCK
TUNE
FF•REW
FOLDER
SEEK
TRACK
FILE
CAT
SCRL
AUDIO
SCAN
AUX
PWR
VOL
PUSH
6CD CHANGER
MP3
RPT
RDM
1
1
1
4
5
6
POWER
SEEK
SCAN
RADIO
CLOCK
AUX
CATEGORYCHANNEL
TRIP
INFO
MIX
RPT
CD
1
2
3
4
5
6
TUNE
AUDIO
AUX
DISP
A•B•C
PRESET
01-06-2009
J1850
Class 2
VPW
Class 2
J1850
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Arbitration
EOD
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Class 2
Class 2
J1850
Pacific Accessory Corporation - Santa Ana, CA 92705
[email protected] • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
OFF
RADIO
DISC
SEEK TRACK
4 5 6
ENTER
DEST
STATUS
ZOOM OUT
ZOOM IN
MAP
ROUTE
PHONE
OFF
RADIO
DISC
INFO
SETTING
BACK
VOICE
1
PRESET
LOAD
SEEK TRACK
CAT
RPT
VOL
A•B•C
2 3 4 5 6
PRESET
SEEK TRACK
CAT
RPT
A•B•C
ENTER
DEST
MAP
ROUTE
PHONE
OFF
RADIO
DISC
INFO
SETTING
BACK
VOICE
1
PRESET
SEEK TRACK
CAT
RPT
A•B•C
2 3 4 5 6
ENTER
PHONE
OFF
RADIO
DISC
INFO
SETTING
BACK
VOICE
SEEK TRACK
CAT
RPT
3 4 5 6
SAT POWER
FM/AM
SEEK
TRACK
VOL
PTY
CAT
DISP
RPT
SCAN
AUDIO
4 5 6
Inniti Operation
Browsing:
<< SEEK Enters Browse Menu and moves forward to
the next step when pressed again.
SEEK/Track >> Takes one step back in the Browse Menu
SCAN Exits the Browse Menu
NOTE: If there is no SCAN button you need to press and hold the SEEK/TRACK >> button to exit the Browse Menu.
Controlling the iPod:
Turning the TUNE KNOB clockwise advances 1 song in an album or playlist.
Turning the TUNE KNOB counter clockwise moves back 1 song in an album or playlist.
Selecting the Input:
Press the RADIO or AM/FM/SAT button a few times until SAT is displayed on the screen. Immediately
turn the TUNE KNOB to scroll through the available sources. Once the source you would like to select is
displayed (IPOD or AUX), press the << SEEK button to select it.
01-06-2009
J1850
Class 2
VPW
Class 2
J1850
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Arbitration
EOD
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Class 2
Class 2
J1850
Pacific Accessory Corporation - Santa Ana, CA 92705
[email protected] • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
Example of Operation (iPod full control):
Press the RADIO button until SAT is displayed
Turn the TUNE KNOB until IPOD is displayed.
Press the << SEEK button to select it.
Press the << SEEK button, the radio will display: PL:LIST
Turn the TUNE KNOB until AR:ARTIST is displayed.
Press the << SEEK button to select it.
Use the TUNE KNOB to select an artist.
Press the << SEEK button to choose that artist.
Use the TUNE KNOB to select an album by
the previously selected artist.
Press the << SEEK button to choose that album.
Use the TUNE KNOB buttons to select a track from
the previously selected album.
Press the<< SEEK button to choose the track to be played.
The track will begin to play and you can select the next or
previous track by using the TUNE KNOB on the radio.
ENTER
DEST
STATUS
ZOOM OUT
ZOOM IN
MAP
ROUTE
PHONE
OFF
RADIO
DISC
INFO
SETTING
BACK
VOICE
1
PRESET
SEEK TRACK
CAT
RPT
A•B•C
2 3 4 5 6
01-06-2009
J1850
Class 2
VPW
Class 2
J1850
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Arbitration
EOD
1 00 0111 01111 0 01 00 11 0 11 0 0
1 11 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Class 2
Class 2
J1850
Pacific Accessory Corporation - Santa Ana, CA 92705
[email protected] • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

PAC UPAC-NIS2 User manual

PAC
Brand
PAC
Model
UPAC-NIS2
Category
Car video systems
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents