Pfister R15-407C Installation guide

Category
Faucets
Type
Installation guide
A COMPANY
Copyright
©
2009, Price Pster, Inc.
Price Pster
Lifetime Limited Mechanical & Pnish Warranty
Covers Pnish and Pfunction for as Long as You
Own Your Home
(Commercial Applications Limit the Duration of the
Warranties as Provided Below)
Price Pster provides the following Warranties for its products. Proof
of Purchase may be required in order to obtain any of the benets set
forth below.
Limited Warranties: Price Pster warrants that for as long as the original
purchaser owns the home in which the Price Pster product (the “Product”)
is originally installed, the Product will be free of all defects in material
and workmanship that would impair the intended and proper use of the
Product. If the Product is installed in a commercial application, the above
mechanical warranty shall be limited for a period of ten (10) years from the
date of purchase of the Product.
Price Pster warrants against deterioration of the Product’s nish for as long
as the original purchaser owns the home in which the Product is originally
installed. If the Product is installed in a commercial application, the above
nish warranty for Products that do not contain the Pforever nish shall be
limited to a period of ve (5) years from the date of purchase.
Exclusive Remedy: In the event of any defect in the Product that breaches
the foregoing warranties, Price Pster, at its option, will repair or replace
the defective part of the Product. Repair or replacement of the Product is
the exclusive remedy.
For any remedy under this warranty, Price Pster is to be notied describing
the problem. In order to notify Price Pster and receive assistance or service
under this warranty, the original purchaser may: (1) call 1-800-Pfaucet
(1-800-732-8238) for a consumer service representative who can assist
you, or (2) write consumer service department c/o Price Pster Inc., 19701
DaVinci, Lake Forest, CA 92610, and include a description of the problem,
model number, your name, address, phone number and approximate date of
purchase, or (3) email Price Pster’s customer service department by going
to www.PricePster.com, or (4) notify the location or distributor from which
the Product was purchased. In any case, you may be required to return the
Product to Price Pster for inspection and proof of purchase may be required.
Limitations and Exclusions:
PRICE PFISTER WILL NOT BE LIABLE FOR ANY OTHER DAMAGES
OR LOSSES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL
AND/OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE
LEGAL THEORY ASSERTED, INCLUDING ANY CLAIM OR BREACH
OF WARRANTY HEREUNDER OR ANY OTHER CAUSE, AND
WHETHER ARISING IN CONTRACT OR IN TORT (including negligence
and strict liability).
Price Pster has the right to discontinue or modify any product at any
time. Some states do not allow limitations or exclusions of incidental or
consequential damages, so the above limitations or exclusions may not
apply to you. This warranty gives you specic legal rights, and you may
also have other rights which vary from state to state.
The above warranties do not cover damage resulting from improper
maintenance, repair, cleaning or installation, misuse, abuse, alterations,
accidents or acts of God.
Price Pster
Garantía Mecánica y sobre el Acabado Limitada de por Vida
Cubre las funciones y el acabado por el tiempo en que usted sea
propietario de su casa
(Las Aplicaciones Comerciales Limitan la Duración
de las Garantías)
Price Pster suministra las siguientes Garantías para sus productos. Es
posible que se requiera la presentación de una Prueba de compra para obtener
cualquiera de los benecios indicados a continuación.
Garantías Limitadas: Price Pster garantiza que por el tiempo en que el
comprador original sea propietario de la casa en el que se hubiese instalado
inicialmente el producto Price Pster (el “Producto”), este Producto estará
libre de todo defecto en material y mano de obra que pueda afectar el
uso proyectado y correcto del Producto. Si el Producto se instala en una
aplicación comercial, la garantía mecánica que antecede estará limitada a
un período de diez (10) años a partir de la fecha de compra del Producto.
Price Pster garantiza el acabado del Producto contra deterioro por el
tiempo en que el comprador original sea propietario de la casa en la que
hubiese instalado inicialmente el Producto. Si el Producto se instala en
una aplicación comercial, la garantía sobre el acabado que precede para
Productos que no contengan el acabado “Pforever” estará limitada a un
periodo de cinco (5) años a partir de la fecha de compra.
Recurso exclusivo: En el caso de que haya un defecto en el Producto
que viole las garantías que preceden, Price Pster, a su opción, reparará o
reemplazará la pieza defectuosa del Producto. La reparación o el reemplazo
del Producto es el recurso exclusivo.
Para todo recurso con respecto a esta garantía, Price Pster deberá ser
noticado, con una descripción del problema. Para noticar a Price Pster y
recibir ayuda o servicio bajo esta garantía, el comprador original puede: (1)
llamar al 1-800-Pfaucet (1-800-732-8238) para hablar con un representante
de servicio al cliente que lo pueda ayudar, o (2) escribir al departamento de
servicio al consumidor, c/o Price Pster Inc., 19701 DaVinci, Lake Forest,
CA 92610 U.S.A., e incluir una descripción del problema, el número del
modelo, su nombre, dirección, número de teléfono y fecha aproximada de
compra, o (3) enviar un e-mail al departamento de servicio al consumidor
de Price Pster entrando en la página web www.PricePster.com, o (4)
avisarle al lugar o al distribuidor en donde se compró el Producto. En
cualesquiera de los casos, podría pedírsele devolver el Producto a Price
Pster para su inspección y es posible que se requiera la presentación de
una prueba de compra.
Limitaciones y Exclusiones:
PRICE PFISTER NO SE HARÁ RESPONSABLE DE NINGÚN OTRO DAÑO
O PERJUICIO, INCLUYENDO, PERO SIN ESTAR LIMITADO A DAÑOS
INCIDENTALES Y/O CONSECUENTES, SIN IMPORTAR LA TEORÍA LEGAL
A LA QUE SE ALEGUE, INCLUYENDO TODO RECLAMO O VIOLACIÓN DE
LA GARANTÍA PRESENTE O CUALQUIER OTRA CAUSA, Y YA SEAN COMO
RESULTADO DE LA LEY CONTRACTUAL O LA DE ANTECEDENTES
(incluyendo negligencia y responsabilidad estricta).
Price Pfister tiene el derecho de discontinuar o modificar cualquier
producto en cualquier momento. Ciertos estados no permiten limitaciones
o exclusiones de daños incidentales o consecuentes, de manera que es
posible que las limitaciones o exclusiones que preceden no correspondan
en su caso. Esta garantía le otorga derechos legales especícos y es posible
que usted también tenga otros derechos que dieren entre un estado y otro.
Las garantías que preceden no cubren daños y perjuicios ocasionados
como resultado de mantenimiento, reparaciones, limpieza o instalación
inadecuados, mal uso, abuso, alteraciones, accidentes o causas de fuerza
mayor.
Price Pster
Une garantie limitée à vie
pour ce qui est de l’aspect mécanique et de la nition,
tant et aussi longtemps que vous serez propriétaire
de votre domicile.
(Garantie limitée en cas d’utilisation commerciale
– voir ci-dessous)
Veuillez noter qu’une preuve d’achat peut être requise en cas de recours
au titre de la garantie.
Garantie limitée : Tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Price Pster a été installé, nous lui
garantissons que ce dernier sera exempt de tout défaut de matériau ou
vice de fabrication pouvant en entraver l’utilisation correcte tel que prévu.
Dans le cas des produits d’utilisation commerciale, la garantie exprimée
ci-dessus est restreinte à une période de dix (10) ans.
Par ailleurs, tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Price Pster a été installé, nous lui
garantissons un article dont la nition ne pourra se détériorer. Dans le
cas des produits d’utilisation commerciale qui ne comportent pas la
nition “Pforever”, la garantie est restreinte à une période de cinq (5) ans.
Recours exclusif : En cas de défaut du produit relevant de la garantie,
le fabricant pourra, à sa discrétion, réparer ou remplacer la partie
défectueuse. Cette mesure constitue un recours exclusif.
Pour tout recours au titre de la garantie, les clients doivent communiquer
avec le fabricant pour lui faire part du problème. L’acheteur d’origine
peut : (1) composer le 1 800 732-8238 pour parler à un représentant qui
l’assistera; (2) écrire au service à la clientèle : Price Pster Inc., 19701
DaVinci, Lake Forest, CA 92610 U.S.A., et fournir une explication du
problème, en précisant le numéro de modèle, son nom, son adresse et
son numéro de téléphone, ainsi que la date d’achat approximative; (3)
communiquer par courrier électronique avec le service à la clientèle en
utilisant le site www.PricePster.com, ou (4) aviser le détaillant qui a
vendu le produit. On peut être obligé de retourner le produit au fabricant,
et une preuve d’achat peut être exigée.
Limitations et exclusions :
PRICE PFISTER NE SERA PAS RESPONSABLE DES AUTRES
DOMMAGES OU PERTES, Y COMPRIS LES DOMMAGES
INDIRECTS, INDÉPENDAMMENT DE TOUTE THÉORIE
JURIDIQUE,
Y COMPRIS TOUTE RÉCLAMATION SELON LAQUELLE IL
Y AURAIT EU RUPTURE DE GARANTIE, QUE CE SOIT PAR
RAPPORT À UN CONTRAT OU PAR VOIE DE NÉGLIGENCE (cela
comprend la négligence et la responsabilité stricte).
Price Pster se réserve le droit de discontinuer ou de modier un produit
en tout temps. Certaines provinces ne permettent pas l’exclusion ou la
limitation des dommages indirects, de sorte que la limitation exprimée
peut ne pas s’appliquer. La présente garantie octroie aux clients certains
droits d’ordre juridique, et ceux-ci pourraient en avoir d’autres, selon la
province où ils habitent.
La garantie ne s’applique pas aux dommages résultant d’un entretien, d’un
nettoyage ou d’une installation fautivement effectués, ou encore d’usages
fautifs, d'abus, de modications, d'accidents ou de catastrophes naturelles.
R15 Series
Serie R15
Série R15
Roman Tub Hand-Held
Shower with Diverter
Ducha De Mano Para Tina Redonda Con
Mecanismo De Desvío
Douchette À Main Avec Partiteur Pour
Baignoires Romaines
12-18-09 EO7567B
25571-0500
ENGLISH
ENGLISH
Thank you for purchasing this Price Pster product. All Price Pster products
are carefully engineered, and factory tested to provide long trouble-free use
under normal conditions. This product is easy to install using basic tools
and our easy to follow illustrated instructions. If you have any questions
regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding.
Price Pster recommends calling a professional if you are uncertain
about installing this product!
This product has been designed for use with the Price Pster 0X6-
140R or JX6-140R Roman Tub series rough-in. It will not work with any
other product.
This product should be installed in accordance with all local and state plumbing
and building codes. For optimum performance of your new Price Pster faucet,
a minimum water pressure of 25 PSI (172 kPa) is recommended.
Your installation will require supply tubes. To preserve the high ow characteristics
of these valves, it is necessary to use ½” I.D. (O.D.) copper tubing or Price
Pster Quick Connect Hose Kit 15-136. Consult the store where you purchased
your faucet for the recommended connections that you may require for your area.
Before installing your Diverter Valve, Price Pster recommends installation of
a ½shock arrester before each supply valve. If deck thickness exceeds 1-¾”
Price Pster Stem Extension Kit 974-370 must be used.
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found near the water meter. If you are replacing an existing faucet,
remove the faucet from the tub and clean the tub surface thoroughly.
3 TOOLS RECOMMENDED:
For Iron Pipe Installation:
● PTFE Plumber’s Tape Slotted screwdriver Phillips Screwdriver
Adjustable wrench Pipe Wrench ● Flashlight
● Cloth
For soldered copper and non-standared installations, some additional tools
may be required.
4 RECOMENDED COMPONENT LOCATIONS
Maximum distance between Diverter Valve (4A) and Spray Head Holder (4B)
is not to exceed 16” (406 mm). Note: Recommended all holes to be 1-¼”
(32 mm) diameter.
5 DIVERTER VALVE INSTALLATION
Remove upper Locknut (5A) and Washer (5B) from Diverter Valve Body (5C).
From underneath deck, insert Diverter Valve Body (5C) through deck hole
(5D) and adjust lower Locknut (5E) and Washer (5 F) so that top of Diverter
Shank (5G) is ½ (13 mm) above Mounting Surface (5 H). From above deck,
place Locknut (5A) and Washer (5B) onto Diverter Shank (5G) and wrench
tighten until Diverter Valve Body (5 C) is rmly secured to deck.
6 SPRAY BASE HOLDER INSTALLATION
Connect Spray Holder (6A) onto Spray Base (6B). Insert Spray Base (6B) trough
Washer (6C) and into Deck Hole (6D). From underneath deck, place Washer
(6E) onto Spray Base Shank (6F) and tighten with Locknut (6G). Be sure Spray
Holder (6A) is centered and facing forward before nal tightening.
3
5
6
4
2
5A
4A
4B
16” (406 mm) MAX.
1-1/4” (32 mm) DIA.
1-3/4” (45 mm) MAX.
1/2” (13 mm)
5G
5H
5F
5E
5B
5D
5C
6A
6F
6C
6D
6E
6G
6B
ENGLISH
ENGLISH
7 SPRAY HOSE INSTALLATION
From above deck, insert Decorative Hose (7A) through Spray Base Holder
(7B). From underneath deck, connect one end of Service Hose (7C) to Diverter
Outlet (7D).
Do not let Decorative Hose (7A) retract down into Spray Base Holder
(7B).
8 SPRAY HOSE CONNECTIONS
Attach Service Hose (8A) to the end of Decorative Hose (8B).
9 DIVERTER VALVE & SPOUT ADAPTER CONNECTION
Connect Diverter Tub Outlet (9A) to Spout Adapter (9B). Use either Price Pster
15-136 Pipe Connect Kit (Supplied Separately) (½”-14 NPSM thread) (9C) or
solder ½(13 mm) I.D. ((16 mm) O.D.) copper lines (cut to length).
For threaded ttings, wrench tighten and use PTFE Plumber’s tape per
manufacturer’s instructions.
When using copper tubing, remove all internal parts from components
prior to soldering. Failure to do so can result in water damage.
10 DIVERTER VALVE & HANDLE VALVE CONNECTIONS
Connect Diverter Inlets (10A) to Handle Valve Outlets (10B). Use either Price
Pster 15-136 Pipe Connect Kit (Supplied Separately) (½”-14 NPSM thread) or
solder ½” (13 mm) I.D. (⅝” (16 mm) O.D.) copper lines (cut to length).
For threaded ttings, wrench tighten and use PTFE Plumber’s tape per
manufacturer’s instructions.
When using copper tubing, remove all internal parts from components
prior to soldering. Failure to do so can result in water damage.
Be sure all pipes are securely fastened to construction to prevent
vibration.
7
8
9
10
3
7A
8B
9A
7B
7C
7D
8A
9B
9C
10A 10A
10B10B
ENGLISH
ENGLISH
11 WATER SUPPLY CONNECTIONS
Connect water supply lines (11A) to Valve Inlets (11B) using high ow exible
lines with ½”-14 NPSM threads (Not Supplied), or solder ½(13 mm) I.D.
(⅝” (16 mm) O.D.) copper lines (cut to length). Please follow manufacturer’s
instructions when installing supply lines.
If any soldering has been done, reinstall all internal parts after heat has
dissipated from all components.
12 DIVERTER TRIM INSTALLATION
Place Plastic Ring (12A) and Flange (12B) over Valve Body (12C) covering
the Valve Body Washers (12D). Secure by screwing the Plastic Nut (12E)
onto the Valve Body (12C). Attach Handle Hub (12F) onto Valve Stem (12G),
and secure with Screw (12H). Hand tighten Decorative Button (12J)) onto
Handle Hub (12F).
13 UNIT START UP
Turn on hot and cold water supply valves.
Caution: Check all connections for leaks. Failure to do so can
result in water damage.
14 DIVERTER VALVE FUNCTION
To activate the handheld shower, press Handle Hub (14A) located on the
diverter.
15 FLUSHING
To prevent damage to the internal parts of your faucet from debris that may
have collected in the water lines, it is necessary to ush the system. Open
Valves (15A) to full on position and activate Diverter Valve (1 5B) allowing
water to ow from the Spray Hose (15C). Run water for one minute. Repeat
in hot and cold positions.
15
12
11
14
4
12E
11B
15A
14A
11B
11A
11A
12C
12G
12A
12F
12B
12H
12J
12D
15A
15B
15C
HOT
COLD
ENGLISH
ENGLISH
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pster Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepster.com
• Installation Support
• Care and Warranty Information
16 HAND HELD SHOWER INSTALLATION
Insert Washer (16A) into Metal Hose Fitting (16B) located on the end of
Decorative Hose (16C). Connect Hand Held Shower (16D) into the end
of Decorative Hose (16C) by turning Metal Hose Fitting (16B) clockwise.
Hand tighten.
17 HAND SHOWER FUNCTION
To adjust spray, turn switch (17A) to a desired spray pattern.
Center: Pulsating with Full Spray.
Right: Pulsating.
Left: Full Spray.
16
17
5
16A
16D
16B
16C
CENTER
17A
RIGHT
LEFT
25571-0500
English Español Français
** *
Letter Designates Finish La Letra Indica el Terminado
La Lettre Designe La Fini
C A Polished Chrome Cromo Pulido Chrome Poli
E E Rustic Pewter Peltre Rústico Étain Rustique
V G Bronce Envejecido Con
Apariencia a Terciopelo
Âgé Le Bronze Avec Le Ap-
parence De Velours
K K Satin Nickel Niquel Satinado Nickel Satiné
U U Rustic Bronze Bronce Rústico Bronze Rustique
V V PVD Polished Brass PVD Latón Pulido PVD Laiton Poli
Y Y Tuscan Bronze Bronce Toscano Bronze Le Toscan
R15-40
19701 DaVinci
Lake Forest, CA 92610
Phone: 1-800-Pfaucet
www.pricepster.com
A COMPANY
951-720*
Contains ASME A112.18.3 - Certified check valves
Contiene válvulas de chequeo certificadas por ASME A112.18.3
Contient des valves de contrôle certifiées par ASME A112.18.3
960-500*
950-200
931-600
950-110
931-600
949-211
910-019
940-745*
971-705
941-705*
950-200
931-600
930-200
930-205
950-900
974-900*
950-200
16-190**
951-710
950-840
970-190
951-705
974-700
960-011*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Pfister R15-407C Installation guide

Category
Faucets
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI