KitchenAid KFBP100LSS User manual

Brand: KitchenAid

Model: KFBP100LSS

Category: Ice cube makers

Type: User manual

This manual is also suitable for

KFBP102LSS

Part No. 8184968 Rev. A

IMPORTANT:

Installer: Leave Installation

Instructions with the consumer.

Comsumer: Keep Installation

Instructions for future reference.

Write down the model and serial numbers

before installing or using Outdoor Bar

Cart.

Both numbers are on the model/serial

number plate, located on the underside,

right front of the Outdoor Bar Cart.

Model #___________________________

Serial # ___________________________

Questions regarding features,

operation, performance, parts or

service? Call 1-800-422-1230 or visit

our web site at www.kitchenaid.com.

Portable Model

KFBP102LSS

Built-in Model

KFBP100LSS

IMPORTANT:

Read and save these

instructions.

Outdoor Bar Cart

(Portable and Built-in)

For the way it’s made

Installation Instructions and

Use and Care Guide

8184968A

Before you start...

You can be killed or seriously

injured if you don’t follow

instructions.

DANGER

Your safety and the safety of

others are very important.

We have provided many important

safety messages in this manual and

on your appliance. Always read and

obey all safety messages.

All safety messages will tell you

what the potential hazard is, tell you

how to reduce the chance of injury,

and tell you what can happen if the

instructions are not followed.

You can be killed or seriously

injured if you don’t immediatel

follow instructions.

IMPORTANT: Observe all governing

codes and ordinances.

WARNING

Product Dimensions

Built-in Installation

Dimensions

This is the safety alert

symbol.

This symbol alerts you to

potential hazards that can kill or hurt

you and others.

All safety messages will follow the

safety alert symbol and either the

word “DANGER” or “WARNING.”

These words mean:

Portable and Built-in models

29"

(73.7 cm)

10-5/8"

(27.0 cm)

35-1/2"

(90.2 cm)

30"

(76.2 cm)

36"

(91.4 cm)

25-1/2"

(64.8 cm)

1/2"

(1.3 cm)

Provide suitable drain

systems in accordance with

local codes for ice bin and

sink drains.The drains and

filter must be accessible.

The portable model must

have suitable drain systems

in accordance with local

codes for the ice bin and

sink drains.

12"

(30.5 cm)

12"

(30.5 cm)

10-1/2"

(26.7 cm)

23"

(58.4 cm)

30"

(76.2 cm)

25-1/2"

(64.8 cm)

Side shelves not shown

bottle well

holder

two piece

sliding cover

support

frame

single

faucet

ice bin

sink

outlet hose and

connectors

bottle

rail

bottle cap

catch pan

towel

holder

bottle

opener

1-1/2"

drain fitting

Basic Parts of the

Built-in and Portable

models

Installation -

Built-in model

Tools needed:

Excessive Weight Hazard

Use two or more people to move

and install bar cart.

Failure to do so can result in back

or other injury.

WARNING

Use a certified plumber to connect and

install potable water supply and drain

system to outdoor bar cart per local code

requirements.

1.Set the Bar Cart on a protective

surface such as cardboard or a blanket.

2.Make sure you have the drain

connections, in accordance with local

codes, under the Bar Cart.

8.Place a small amount of plumbers

putty around both the ice bin and sink

drain mounting seats.

7.Install water inlet connection in a

convenient location under the cutout.

Position the water inlet connection so that

the plastic hose easily reaches the filter

inlet connection.

sink

washer

locknut

plumbers putty

5.Install the faucet and fasten

securely.

6.Install the water filter on the

sink/faucet side of the cutout. Position the

filter so that the plastic hose attached to

the filter easily reaches the faucet

connection.

plastic hose

connector

inlet

connector

nut

mounting

panel

3.Remove the bottle rail, bottle cap

catch pan and water filter from the ice bin.

4.Remove the faucet from the sink.

Gather the required tools and parts before

starting installation. Read and follow the

instructions provided with any tools listed.

• Level

• Phillips screwdriver

• tape measure or ruler

• slip joint pliers

• pipe wrench

• adjustable wrench

Parts needed:

• 1-1/2" drain system

• 1" drain system

• NSF- or UPC-listed water connection lines

• plumbers putty

• clear silicon

inlet hose and

connectors

water filter connection

and filter

11.Apply a bead of all weather

clear silicone on the under side of the

back and two sides of the top lip.

12.Carefully position the Bar Cart

into the cut out. Immediately remove any

excess silicone.

apply clear

silicone

13.Connect the plastic hose from

the water filter to the faucet connection

and tighten securely.

14.Attach the plastic cold water

hose from the water inlet connection to

the inlet side of the filter. Use N.S.F. or

U.P.C.-listed water connection line for

water supply to inlet connector. Potable

water supply system to be connected to

inlet connector per local code

requirements.

15.Unwrap the bottle rail and

bottle cap catch pan. Position them over

the key-lock studs and slide down to lock

in place.

16.Unwrap the sliding cover and

place into frame on top of the ice bin.

plastic

hose

filter

plastic

hose

inlet

connector

filter

Installation -

Portable model

Excessive Weight Hazard

Use two or more people to move

and install bar cart.

Failure to do so can result in back

or other injury.

WARNING

1.Make sure you have adequate

drain connections for the Bar Cart.

sink

washer

locknut

4.Install the faucet and fasten

securely.

6.Ice bin drain and sink drain fittings

to be connected to drain system in

accordance with local code requirements.

7.Install the 1" (2.5 cm) drain fitting

in the ice bin and the 1-1/2" (3.8 cm)

drain fitting in the sink.Tighten securely.

Remove and discard the excess plumbers

putty.

drain

washer

locknut

5.Place a small amount of plumbers

putty around both the ice bin and sink

drain mounting seats.

plumbers putty

9.Install the 1" (2.5 cm) drain fitting

in the ice bin and the 1-1/2" (3.8 cm)

drain fitting in the sink.Tighten securely.

Remove and discard the excess plumbers

putty.

10.Ice bin drain and sink drain

fittings to be connected to drain system in

accordance with local code requirements.

drain

washer

locknut

Use a certified plumber to connect and

install potable water supply and drain

system to outdoor bar cart per local code

requirements.

2.Remove the bottle rail, bottle cap

catch pan and water filter from the ice bin.

3.Remove the faucet from the sink.

plastic

hose

inlet

connector

filter

8.Connect the plastic line from the

water filter to the faucet connection and

tighten securely.

plastic

line

filter

Taking care of your

Bar Cart

Wipe up any water spills on the exterior.

Water can cause spots.

Stainless steel surfaces: Use any cleaner

acceptable for use on stainless steel.

Always rub in the direction of the

manufacturer's polishing marks.

Other surfaces: Clean with warm

dishwashing soap and water.

Cleaning

General Tips

IMPORTANT:

Always follow label

instructions on cleaning products.

For routine cleaning, wash with soap and

water using a soft cloth or sponge. Rinse

with clean water and dry at once with a

soft, lint-free cloth to avoid spots and

streaks.

Never use steel wool, as it will scratch the

surface.

Use of the accessory cover designed for

Outdoor Bar Cart will protect finish from

weather.

Stainless Steel

IMPORTANT:

Do not use soap-filled

scouring pads, abrasive cleaners,

Cooktop Polishing Creme, steel wool,

gritty wash cloths or paper towels.

Cleaners should not contain chlorine.

Damage may occur.

Rub in direction of grain to avoid

scratching or damaging the surface.

Food spills should be cleaned as soon as

possible. Spills may cause permanent

discoloration.

• Use Stainless Steel Cleaner & Polish

(Part #4396095). See “Requesting

9.Install water inlet connection

through hole provided in cabinet rear

panel.

plastic hose

connector

inlet

connector

nut

cabinet

panel

10.Attach the plastic cold water

hose from the water inlet connection to

the inlet side of the filter. Use N.S.F.

U.P.C.-listed water connection line for

water supply to inlet connector. Potable

water supply system to be connected to

inlet connector per local code

requirements.

11.Unwrap the bottle rail and

bottle cap catch pan. Position them over

the key-lock studs and slide down to lock

in place.

12.Unwrap the sliding cover and

place into frame on top of the ice bin.

13.Rotate the side shelves up into

their locked position or leave down as

needed.

14.Lock the front locking caster

wheels when in use.

Assistance or Service” on Page 7 to

order.

• Use a mild liquid detergent or all-

purpose cleaner according to label

instructions.

• Rinse with clean water and dry at once

with soft, lint-free cloth to avoid spots

and streaks.

• Use vinegar to remove hard water

spots. Rinse with water and dry

thoroughly.

• Use a glass cleaner to remove

fingerprints.

Exterior

The quality of this material resists most

stains and pitting, providing that the

surface is kept clean and protected.

• Apply stainless steel polish to all areas

before first use. Re-apply after each

cleaning to prevent permanent damage

to surface.

• Cleaning should always be followed by

rinsing with clean warm water.

• Use a metal polish or stainless steel

brightener to remove fingerprints, water

spots, oxidation and food stains. Always

follow the manufacturer’s directions.

• Wipe the surface completely dry with a

soft cloth.

Winterization of faucet and

drain system

When temperatures are below 35° F for

an extended period of time:

1.Tu rn off water source to sink.

2.Remove potable water supply

system from connection and

store appropriately.

3.Remove filter

from its connection and

store inside in a warm

dry area.

4.Disconnect drain

traps and 1/4" tubing

from the filter connector

and allow to drain.

5.Cover bar cart with accessory

cover or tarp.

plastic

hose

Warranty

KitchenAid

Outdoor Bar Cart Warranty

LENGTH OF WARRANTY KitchenAid WILL PAY FOR:

LIMITED ONE-YEAR WARRANTY Factory Specified Parts and Repair Labor to correct defects in material and

From Date of Purchase workmanship (except filters). Service must be provided by a Service

Company designated by KitchenAid.

This warranty excludes damage to the finish, such as scratches or

discoloration, which may occur during regular use.

KitchenAid WILL NOT PAY FOR:

A. Installation of your KitchenAid Outdoor Bar Cart or damage caused by improper installation or failure to comply with

local code requirements

B. Shipping, pickup and delivery, removal or re-installation, as your bar cart is designed to be repaired in the home.

C. Service calls to:

1. Correct the installation of your KitchenAid bar cart.

2. Instruct you how to use your KitchenAid bar cart.

3. Correct house plumbing.

4. Perform normal maintenance, including periodic replacement of seals, fittings, etc.

D. Repairs when your bar cart is used in other than normal, single-family household use.

E. Damage to your bar cart caused by negligence, accident, misuse, fire, flood, acts of God, or use of products,

including cleaning products, not approved by KitchenAid or KitchenAid Canada.

F. Repairs to parts or system resulting from unauthorized modifications to your bar cart.

G. In Canada, travel or transportation expenses for customers who reside in remote areas.

H. Replacement parts or repair labor costs for units operated outside the United States and Canada.

I. Deterioration due to normal wear and tear of your bar cart.

KitchenAid and KitchenAid Canada do not assume any responsibility for Incidental or Consequential Damages.

Any implied warranty or merchantability or fitness for a particular purpose is limited in duration to the duration

of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow

limitations on how long an implied warranty lasts, so these exclusions or limitations may not apply to you.This warranty

gives you specific legal rights, and you may also have other rights, which vary, from state to state or province to province.

Outside the United States and Canada, a different warranty may apply. For details, please contact your

authorized KitchenAid bar cart dealer.

If you need customer or technical assistance, check the “Requesting Assistance or Service” section or by calling our

KitchenAid Customer Interaction Center at 1-800-422-1230, from anywhere in the U.S.A. , and 1-800-807-6777, from

anywhere in Canada.

Requesting Assistance or Service

Call the KitchenAid Customer Interaction

Center toll-free at 1-800-235-0665.

Our consultants are available to assist you.

When calling: Please know the purchase date, and

the complete model and serial number

of your appliance This information will

help us better respond to your request.

Our consultants provide assistance with:

•

Features and specifications on our full line

of appliances

•

Installation information

If you need replacement parts

If you need to order replacement parts, we recom-

mend that you only use factory-authorized parts.

These parts will fit right and work right, because

they are made to the same exacting specifications

used to build every new KitchenAid

appliance.

To locate factory-authorized parts in your area, call

our Customer Interaction Center telephone number,

your nearest authorized service center, or KitchenAid

Factory Service at 1-800-442-1111.

For further assistance

If you need further assistance, you can write to

KitchenAid with any questions or concerns at:

KitchenAid Brand Home Appliances

Customer Interaction Center

c/o Correspondence Dept.

2000 North M-63

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your

correspondence.

•

Use and maintenance procedures

•

Accessory and repair parts sales

•

Specialized customer assistance (Spanish

speaking, hearing impaired, limited vision, etc.)

•

Referrals to local dealers, service companies, and

repair parts distributors

KitchenAid designated service technicians are

trained to fulfill the product warranty and provide

after-warranty service, anywhere in the United

States.

To locate the designated KitchenAid service

company in your area, you can also look in your

telephone directory Yellow Pages.

If you need assistance or service in U.S.A.

Part No. 8184968 Rev. A

® Registered Trademark/Trademark of

KitchenAid U.S.A., KitchenAid

Canada licensee in Canada

Prepared by KitchenAid, Benton Harbor, Michigan 49022

Printed in U.S.A.

07/2004

2. If you need service

✝

...

Contact your nearest KitchenAid Canada Appli-

ance Service branch or authorized servicing

outlet to service your appliance. (See list below.)

Make sure the service company you contact is

authorized to service your appliance during the

warranty period.

1. If the problem is not due to one of the items

listed in “Check Operation”

✝

...

Contact the dealer from whom you

purchased your appliance, or call the

KitchenAid Canada Customer

Interaction Center toll-free,

8:30 a.m. – 6 p.m. (EST),

at 1-800-235-0665.

KitchenAid Canada Appliance Service – Consumer Services

Direct service branches:

BRITISH COLUMBIA 1-800-665-6788

ALBERTA 1-800-661-6291

ONTARIO Ottawa area 1-800-267-3456

(except 807 area code) Outside the Ottawa area 1-800-807-6777

MANITOBA, SASKATCHEWAN 1-800-665-1683

and 807 area code in ONTARIO

QUEBEC Montreal (except South Shore) 1-800-361-3032

South Shore Montreal 1-800-361-0950

Quebec City 1-800-463-1523

Sherbrooke 1-800-567-6966

ATLANTIC PROVINCES 1-800-565-1598

For further assistance

If you need further assistance, you can write to

KitchenAid Canada with any questions or concerns at:

Consumer Relations Department

KitchenAid Canada

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your

correspondence.

✝

When asking for assistance or service, please

provide a detailed description of the problem,

your appliance’s complete model and serial

numbers, and the purchase date. This

information will help us respond properly to

your request.

If you need assistance or service in Canada

Requesting Assistance or Service

Page is loading ...

KitchenAid KFBP100LSS User manual

Brand: KitchenAid

Model: KFBP100LSS

Category: Ice cube makers

Type: User manual

This manual is also suitable for

KFBP102LSS

Download PDF

report

in other languages

français: KitchenAid KFBP100LSS Manuel utilisateur

KitchenAid KFBP100LSS User manual

This manual is also suitable for

KitchenAid KFBP100LSS User manual

in other languages

Related papers

Other documents