EZoneTronics Ezonetronics Android 6 8 Car Radio Stereo 7 inch Capacitive Touch Screen High Definition 1024x600 GPS Navigation USB SD Player 1G DDR3 16G NAND Memory Flash CT009L User manual

Type
User manual
User Manual
1. User instructions
We are very glad that you would choose this vehicle radio navigation system device.
The device is based on the Android platform with wifi. It enables you to have a fast
and convenient Internet experience, kinds of multimedia entertainment function.
This booklet will introduce the various features of the device, please read it carefully
before the installation of the device.
2. Features and Functions
Smart phone connection, Mirror Link
Fully capacitive touch screen control
Build-in Bluetooth 4.0, Phone call when navigation, hands-free, phone book,
A2DP to steaming the phone music to the radio
High definition digital screen
Android System
Quad Core 1.2GHz Cortex A7
Build-in 1G/2G(Optional) DDR3, 16G flash memory
Build-in WIFI.
Rear view camera input
Built-in 4*45W power amplifier
Build-in AM/FM with 30 preset stations
USB/TF input
Steering wheel control
2CH rear video input
2CH rear RCA input
1CH rear video output
2CH rear audio output
3. Installation Diagram
4. Main Page
1
Radio/Music Widgets: when play music or radio, user can control on this pad.
2
Main APP Page
3
3
rd
Party APP page
4
Main Menu
5
List of running APP
6
Back
4.1 Bluetooth
1
Bluetooth Connection statues.
2
Bluetooth Keypad page
3
Phone book page
4
Incoming/outgoing calls
5
Bluetooth Music page.
6
Our device bluetooth name.
4.2 Radio
1
Volume Control
2
FM Frequency
3
AM Frequency
4
Auto Scan the available radio station
5
Sound Performance Setting
6
Pre-saved radio stations
7
Manual search for radio frequency
8
Fast slide search for radio frequency
4.3 Mirror Link Feature for smartphone
Use the APP named “Easyconnected” for the smartphone mirror link features.
After you open the APP, you will go to the selection page according to your
smartphone type.
Please follow the steps in the APP according to the instructions
5. Car Setting
5.1 Common Setting
Standby time: When turn off the car ACC, the unit will stay at the standby mode.
When the ACC is on again, the unit can start in seconds. It will consume more drain
from the car battery. The standby mode up limit is 60 minutes.
Assistive Touch: when this is on, there is dot on the screen as the assistive touch
button.
Reverse Volume Suppression: when the car is in reverse mode, the volume of other
music applications will be auto adjusted according to this setting.
Boot Logo: users can change the boot logo with preferred pictures
Reset All Settings: all the customized setting will be reset
Erase All Content: all the content on the flash will be formated.
5.2 Display
Daytime Backlight Set: change the screen backlight in daytime mode
Nighttime Backlight Set: change the screen backlight in the nighttime mode
Auto Mode: Auto detect the illumination signal to switch from daytime/nighttime
mode.
Key Light Color: Users can customize the button back light
5.3 Volume
Users can adjust the volume of different major functions
5.4 Sound
Users can adjust the Bass/Middle/Tremble EQ and best position settings.
5.5 Video
Users can adjust all assistant function options.
5.6 Navigation
Autostart Navigation: when the unit is turn on, the navigation software will start
automatically.
File Path: set the navigation path as the default one.
Navi Mixed: Users can have music when navigation. Sound ratio can be adjusted
here.
5.7 Bluetooth
Auto Connect: the unit will auto connect the memoried bluetooth device.
Auto Answer: when a phone calls in, the unit will pick up the phone automatically.
5.8 SWC
Please follow below steps to connect the wires:
1. Find your car steering wheel control button signal wires, it is normally located
under your driving wheel.
2. The signals have two, one gives "+" voltage and another gives GND voltage.
3. Check our unit power cable, there is a wire labled "SWC1" or "SWC2"
4. Connect the "+" Voltage wires to the "SW1" or "SW2" wires.
5. Connect the GND wire to GND wires of our unit.
6. Go to the this option to learn the steering wheel control function.
7. Press the relative function icon on the unit.
8. Press your steering wheel control button and there will be a voltage on our unit to
memory.
9. Step by step to finalize all the buttons.
6. FAQ:
Q: I can not figure out how to make the reverse camera work:
Please check below wires for setup:
1. check is there two red trigger wire on the camera extension wire.
2. If you find it, connect one of the trigger wire to the reverse bulb wire together with
the camera power wire.
3. Connect the other red trigger wire to the pink wire labled "back car" on our unit.
4. The RCA socket need to plug into the "CAM" hole on the back of our unit chassis.
5. When you reverse the car, the reverse bulb wire give power/signal to both camera
and our unit.
Q: How to change the logo?
Please refer to Point 5.1
Q: How to calibrate the touch screen?
Please press 5 fingers on the main page of the unit for 20seconds. Users will go to
the screen/touch button calibrate page automatically
Q: How to use the steering wheel control?
Please refer to the point 5.8 of this manual
Q: How to change the radio frequency?
1. Please go to Car Setting/About device
2. Press the setting icon on the right up corner.
3. The password is 8888
4. Select the Zone according to your right area.
5. Save and quit.
6. Please do not change any other settings to avoid irrecoverably damage.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

EZoneTronics Ezonetronics Android 6 8 Car Radio Stereo 7 inch Capacitive Touch Screen High Definition 1024x600 GPS Navigation USB SD Player 1G DDR3 16G NAND Memory Flash CT009L User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI