LUXHIVE KL-BD7E-FS6R User guide

Type
User guide
Frequently Asked Questions (FAQs)
LUXHIVE™ 12 Pack Soundproofing Acoustic Foam Panels
QUESTION 1: What problem is this LUXHIVE™ product solving? What’s the NRC? 2
QUESTION 2: Do I have polyurethane foam releasing volatile organic compounds
(VOCs) into my air that I need to replace with LUXHIVE™ tiles engineered without
polyurethane foam (PU foam)? 3
QUESTION 3: Are sound absorption, sound diffusion, and soundproofing all the
same? 3
QUESTION 4: What is LUXHIVE™ soundproof foam made of? 3
QUESTION 5: How do I remove the volatile organic compounds (VOCs) in my air
caused by polyurethane foam, primarily used for building construction and package
cushioning but sold as a soundproofing material, I haven’t thrown away yet? 4
QUESTION 6: How do I get the best use of my LUXHIVE™ soundproof foam? 4
QUESTION 7: What are the instructions for mounting my LUXHIVE™ soundproofing
acoustic foam panels without ruining my wall? 6
QUESTION 8: Articles from the United States Environmental Protection Agency (EPA)
regarding Volatile Organic Compounds (VOCs) and Indoor Air Quality (IAQ)? 7
Page 1
QUESTION 1: What problem is this LUXHIVE™ product solving? What’s the NRC?
After trying several brands of typically black polyurethane (PU) foam, we noticed the soundproofing
results were minor at best and placebo effect at worst. So we dug into the material: Polyurethanes
(PUs) are a product of the addition polymerization reaction between diisocyanates and diols. The
main environmental issue of PU materials concerns the use of isocyanate raw materials as these
compounds are harmful to people and the environment. MDI and TDI, the most widely used
isocyanates in the PU industry, are classified as CMR (Carcinogen, Mutagen and Reprotoxic). Source:
Merenyi S. REACH: Regulation (EC) No 1907/2006: consolidated version (June 2012) with an
introduction and future prospects regarding the area of Chemicals legislation. GRIN Verlag; 2012.
Polyurethane foam is made from petroleum-byproducts (highly flammable), undergoes volatile
organic compounds off-gassing (persistent indoor environmental hazard), and is an inappropriate
acoustic material (though commonly sold as acoustic panels). Absorption and diffusion are called
room treatments and are used for better sound whereas soundproofing is used for less noise. PU
foam is commonly sold as performing both sound absorption as well as soundproofing which isn't
possible by the definitions of sound absorption and soundproofing respectively. The chemistry
behind PU foam only permits minor effectiveness at best and placebo effect at worst with regards to
soundproofing, sound absorption, and sound diffusion.
We decided to solve this problem through the creation of LUXHIVE soundproofing panels because
we desired non-toxic industrial noise reduction and unwanted sound control. Our proprietary
LUXHIVE formula is actively soundproofing with a 0.85 Noise Reduction Coefficient (NRC),
heat-resistant with a 0.0032 W/m.K Thermal Conductivity & B1 Flame Retardant Grade, odorless, and
without volatile organic compounds (VOCs) emissions as our proprietary formula is similar to Magic
Eraser without the persistent indoor environmental hazards of polyurethane (PU) foam. According
to the US Environmental Protection Agency, VOCs can cause eye, nose and throat irritation, frequent
headaches, nausea, and can also damage the liver, kidney, and central nervous system. LUXHIVE
soundproofing acoustic foam panels have been engineered specifically to be a superior deadening
material for noise reduction and unwanted sound control.
Page 2
QUESTION 2: Do I have polyurethane foam releasing volatile organic compounds (VOCs) into
my air that I need to replace with LUXHIVE™ tiles engineered without polyurethane foam (PU
foam)?
While polyurethane foam can arrive compressed or uncompressed, can have a noticeable
unpleasant odor or release volatile organic compounds without a noticeably unpleasant odor, and if
compressed can require soaking in water or waiting sometimes days to regain shape only to end up
deformed and distorted, feel with your hands the difference between your uncompressed LUXHIVE
soundproofing panels and your typical polyurethane foam. Also, compare the soundproofing quality
of your odorless, heat-resistant, non-toxic LUXHIVE soundproofing panels to your typical
polyurethane foam.
QUESTION 3: Are sound absorption, sound diffusion, and soundproofing all the same?
Sound absorption and sound diffusion are not the same as the methods used to reduce sound
leakage into and out of a space. The methods used to reduce sound leakage into and out of a space
are called soundproofing which results in less noise, noise defined as any unwanted sound.
Absorption and diffusion are called room treatments and are used for better sound whereas
soundproofing is used for less noise.
QUESTION 4: What is LUXHIVE™ soundproof foam made of?
Our LUXHIVE acoustic panels have been meticulously designed for indoor odorless, heat-resistant,
non-toxic industrial noise reduction and unwanted sound control. Sound absorption and sound
diffusion are not the same as the methods used to reduce sound leakage into and out of a space,
called soundproofing which results in less noise (noise defined as any unwanted sound). Absorption
and diffusion are called room treatments and are used for better sound whereas soundproofing is
used for less noise. Our proprietary formula is similar to Magic Eraser without the persistent indoor
environmental hazards of polyurethane (PU) foam. Test for yourself the flammability as well as the
soundproofing ability of polyurethane foam compared to LUXHIVE panels as LUXHIVE has a 0.0032
W/m.K Thermal Conductivity as well as a B1 Flame Retardant Grade.
Page 3
Polyurethane foam is made from petroleum-byproducts (highly flammable), undergoes volatile
organic compounds off-gassing (persistent indoor environmental hazard), and is an inappropriate
acoustic material (though commonly sold as acoustic panels). Absorption and diffusion are called
room treatments and are used for better sound whereas soundproofing is used for less noise. PU
foam is commonly sold as performing both sound absorption as well as soundproofing which isn't
possible by the definitions of sound absorption and soundproofing respectively. The chemistry
behind PU foam only permits minor effectiveness at best and placebo effect at worst with regards to
soundproofing, sound absorption, and sound diffusion.
We decided to solve this problem through the creation of LUXHIVE soundproofing panels because
we desired non-toxic industrial noise reduction and unwanted sound control. Our proprietary
LUXHIVE formula is actively soundproofing, heat-resistant, odorless, and without volatile organic
compounds (VOCs) emissions. According to the US Environmental Protection Agency, VOCs can
cause eye, nose and throat irritation, frequent headaches, nausea, and can also damage the liver,
kidney, and central nervous system. LUXHIVE soundproofing acoustic foam panels have been
engineered specifically to be a superior deadening material for noise reduction and unwanted
sound control.
QUESTION 5: How do I remove the volatile organic compounds (VOCs) in my air caused by
polyurethane foam, primarily used for building construction and package cushioning but sold
as a soundproofing material, I haven’t thrown away yet?
Consistent use of air purifiers with HEPA (High-Efficiency Particulate Air) style filters with an added
layer of activated carbon, also known as activated charcoal, can solve the problem of ambient VOCs
released from PU foam panels. Activated carbon is full of microscopic cracks and holes which trap
and remove airborne odors, gases, and chemicals from building materials, cleaning products,
personal care items, smoke, cooking odors, spoiled food and more.
QUESTION 6: How do I get the best use of my LUXHIVE™ soundproof foam?
We'd like to offer you two different yet similar perspectives as our follow up to your initial inquiry.
Perspective #1 of 2 = Another customer reached out asking if our soundproofing will help lessen
the sound of his roommates walking down the hallway outside his room if he stuck LUXHIVE on his
room door. Here was our response which we think you may find useful as well:
Page 4
If you want to use LUXHIVE tiles to solve this problem, you'd want to place your tiles on the wall
opposite the door as well as the wall including the door. Assuming you are in an academic shared
space environment where your rooming situation may change year to year, consider trying "Mack's
Ultra Soft Foam Earplugs" and/or "Mack's Pillow Soft Silicone Putty Earplugs", which are available on
Amazon.com as well as many other local retailers if you Google for "Mack's Ultra Soft Foam
Earplugs" and/or "Mack's Pillow Soft Silicone Putty Earplugs". We like "Mack's Ultra Soft Foam
Earplugs" for blocking sound while sleeping as well. Everyone is unique and therefore consider
trying "Mack's Ultra Soft Foam Earplugs" as well as "Mack's Pillow Soft Silicone Putty Earplugs" as you
may prefer one over the other.
For focusing while in an academic shared space environment or just in everyday life, if you prefer
complete silence consider utilizing "Mack's Ultra Soft Foam Earplugs" or "Mack's Pillow Soft Silicone
Putty Earplugs". If you need a little noise to cancel wondering thoughts while increasing focus,
consider listening to music without lyrics of the genre lo-fi, classical, soft rock, etc. using YouTube
channels featuring such music (right-click the YT video and select loop if you find YT stations you
particularly enjoy), Pandora.com, Spotify.com, etc.
Perspective #2 of 2 = Another customer reached out to us asking about office use and if our
soundproofing is the solution. Here was our response which we think you may find useful as well:
Best Solution = Starts at the construction level before an office existed. For a soundproof space that
was originally built to be soundproof, the walls would be composed of large and dense layers of
thick material such as concrete or a dense specie of wood. If we are talking about a structure that
has been already built of the residential and/or commercial type that was built without
soundproofing spaces in mind, then it is highly likely that the material used between the walls is thin
to sparse which is causing most sound to pass in and/or out. Sound, starting at the source, projects
outward in all directions. A small portion of it (known as direct sound) travels in a straight line to let’s
say a microphone. The remainder (known as reflected sound) bounces randomly between the
surfaces of the room.
Second Best Solution = Starts with working with what has been constructed. The methods used to
reduce sound leakage into and out of a space are called soundproofing which results in less noise,
noise defined as any unwanted sound. Soundproofing works to deadening noise entering as well as
leaving as the sound waves are disrupted or rather broken down. This is where LUXHIVE could be of
benefit. Ideal wall coverage of all four walls is 20-80% coverage. If building a new office isn’t an
option, LUXHIVE soundproofing utilized on all the walls of the space would be step 1. The need for
bass traps for the corners of the room can be replaced with bean bag chair like objects if you have
those available. Then, as you test what coverage is yielding the best results for the dimensions and
purposes of your space, you add or remove soundproofing focused panels as you get closer and
then finally achieve the desired final results for your space.
Page 5
QUESTION 7: What are the instructions for mounting my LUXHIVE™ soundproofing acoustic
foam panels without ruining my wall?
Another customer reached out to us asking about office use and if our soundproofing is the
solution. Here was our response which we think you may find useful as well:
Best Solution = Starts at the construction level before an office existed. For a soundproof space that
was originally built to be soundproof, the walls would be composed of large and dense layers of
thick material such as concrete or a dense specie of wood. If we are talking about a structure that
has been already built of the residential and/or commercial type that was built without
soundproofing spaces in mind, then it is highly likely that the material used between the walls is thin
to sparse which is causing most sound to pass in and/or out. Sound, starting at the source, projects
outward in all directions. A small portion of it (known as direct sound) travels in a straight line to let’s
say a microphone. The remainder (known as reflected sound) bounces randomly between the
surfaces of the room.
Second Best Solution = Starts with working with what has been constructed. The methods used to
reduce sound leakage into and out of a space are called soundproofing which results in less noise,
noise defined as any unwanted sound. Soundproofing works to deadening noise entering as well as
leaving as the sound waves are disrupted or rather broken down. This is where LUXHIVE could be of
benefit. Ideal wall coverage of all four walls is 20-80% coverage. If building a new office isn’t an
option, LUXHIVE soundproofing utilized on all the walls of the space would be step 1. The need for
bass traps for the corners of the room can be replaced with bean bag chair like objects if you have
those available. Then, as you test what coverage is yielding the best results for the dimensions and
purposes of your space, you add or remove soundproofing focused panels as you get closer and
then finally achieve the desired final results for your space.
Ideal wall coverage varies anywhere between 20-80%.
When covering an area of one wall, leave its mirror reflection point on the opposite wall
open because one panel is sufficient to kill all standing waves in that spot.
Never bend, twist, squeeze, or compress to retain optimal integrity.
Store in a dry place and never soak in water.
Recommendation = Use easy, cost-effective 2" (or similar) T-Pins that leave such a small hole that
just a Q-tip and hobby store paint can mask the hole when rearranging your foam panels.
Command Strips: won't hold onto the foam unless you use big, expensive ones.
Silicone Sealant: effective but sticks way too well to the wall and too hard to get off without
tearing paint off.
Page 6
Acrylic Caulk: better than silicone because it comes off the wall easier but still a big pain.
Carpet Tape: doesn't hold onto the foam and sticks a little too well to the wall.
Spray Adhesive: common mounting solution but results in a sticky wall covered in bits of
foam.
QUESTION 8: Articles from the United States Environmental Protection Agency (EPA)
regarding Volatile Organic Compounds (VOCs) and Indoor Air Quality (IAQ)?
Indoor Air Quality (IAQ) - Technical Overview of Volatile Organic Compounds
https://www.epa.gov/indoor-air-quality-iaq/technical-overview-volatile-organic-comp
ounds
Indoor Air Quality (IAQ) - Volatile Organic Compounds' Impact on Indoor Air Quality
https://www.epa.gov/indoor-air-quality-iaq/volatile-organic-compounds-impact-indo
or-air-quality
Page 7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

LUXHIVE KL-BD7E-FS6R User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI