SWADS-ALSEN1

Swann SWADS-ALSEN1 Specification

  • Hello! I am an AI chatbot trained to assist you with the Swann SWADS-ALSEN1 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Expand Your Wireless Alert System
Alert Sensor
Extra PIR Sensor for your Wireless Alert Solution
Security Made Smarter
WIRELESS ALERT
Combine with the Swann Home Doorbell Kit, Home Doorway Alert Kit, Gate Alert Kit or
DrivewayAlert Kit for additional security at your home or business
Connect in minutes with easy mounting, pairing to a base Speaker Receiver Unit (within the Kits)
& convenient wireless operation (uses 3 x AAA batteries)^
Position the Extra Alert Sensor where you need protection near entrances, doorways, driveways,
garages, shops, restaurants, cafes, reception areas, lobbies or anywhere activity occurs
Enjoy the convenience of wireless with a long range up to 200ft/60m* from the Sensor to a
Speaker Receiver Unit
The Extra Alert Sensor detects motion up to 40ft/12m away with a weatherproof design for
monitoring driveways & other outdoor locations, with the ability to adjust the position using the
rotating mounting bracket
• Expand your system by adding even more Sensors+ from the Swann DIY Alert Range for a
customized alarm system for your home or business.
+ Requires Swann Speaker Receiver Unit. You can pair up to 45 sensors to one Receiver (up to 15 per channel)
^ Batteries not included * Depends on local conditions
EASY INSTALLATION
WIRELESS
MOTION DETECTION
BATTERY OPERATED
For more information on this product visit www.swann.com
SWADS-ALSEN1
WARNING
KEEP BATTERIES OUT
OF REACH OF CHILDREN
If swallowed, battery
can cause severe
internal burns & would
require immediate
medical attention!
What’s in the box?
All installation accessories included
• Alert Sensor
Mounting Bracket with Adjustable Angle
Pivot Joint
Mounting Screws & Wall Plugs
Theft Deterrent Stickers
Quick Start Guide
Protect Your Home
Alert Sensor
Extra PIR Sensor for your Wireless Alert Solution
Specifications
Sensor
Dimensions 4.7 x 1.8 x 1.6” / 120 x 46 x 40mm
Weight 2.9oz / 81g
Motion Up to 40ft / 12m away
Batteries 3 x AAA Batteries (not included)
Signal Range Up to 200ft / 60m*
* Depending on local conditions
Our Promise
Swann stands by its promise of Lifetime Support
to make advanced security easy to use, install and
maintain. Everything is in the pack but if you need it
Swann’s help desk is available 24 hours a day, 7 days a
week for the life of the product.
Installation is easy
Do-it-Yourself
Installing this Swann product is simple. For instructions, tips and videos
see the operating instructions in this pack or visit www.swann.com
Professional Installation
Need extra help? We have an installer in your region!
For more visit www.swann.com
For more information on this product visit
www.swann.com
Doorways
Windows
Entrances
/