Hydro Crunch TKLED-48X48X80 Installation guide

Type
Installation guide
Adjustable Wire Hanger Installation Manual
1. This package contains 2
parts of adjustable wire hanger.
2. Locate part A and B.
3. Insert part A wire end into
part B retractable insert
opening.
4. Press part B retractable point
down to let out part A wire and
adjust wire hanger length.
5. Attach part B hanger clips to
the light fixture.
6. Use carabiner hook to hang
onto pole/beam.
  • Page 1 1

Hydro Crunch TKLED-48X48X80 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI