1 Connect to a Computer
a. Unplug the power cable and remove
the case panel.
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-prole bracket
provided.
b. Locate an available PCI-E slot and carefully
insert the adapter.
c. Connect the antennas to the adapter.
d. Replace the case panel, plug in the power
cable and turn on your computer.
Quick Installation Guide
300Mbps Wireless N
PCI Express Adapter
MODEL NO. TL-WN881ND
3 Join a Wireless Network
For technical support and other information, please
visit http://www.tp-link.com/support, or simply
scan the QR code.
7106507700 REV2.1.1
©2017 TP-Link
2 Install Driver
Insert the CD and run the Autorun.exe.
Select TL-WN881ND and follow the
instructions to complete the installation
Note:
You can also download the driver from the product’s
Support page at www.tp-link.com.
Note:
If you can’t install the driver successfully, disable
the antivirus software and firewall, then try again.
TL-WN881ND
b.
Connections are available
Wireless Network Connection
Connect automatically
Connect
√
TP-Link_XXXX
a. Click the network icon ( or ) on the
taskbar
b. Select your Wi-Fi network, click Connect,
and enter the password when prompted.
For detailed instructions, please refer to the User Manual from
this product’s Support page at www.tp-link.com.
a.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TP-LINK TL-WN881ND User manual
-
-
-
TP-LINK Archer T4E User guide
-
-
TP-LINK AC1300 Wireless Dual Band PCI Express Adapter User guide
-
-
-
-