Sterling 71220128-0 Dimensions Guide

Sterling
Brand
Sterling
Model
71220128-0
Type
Dimensions Guide

This manual is also suitable for

Sterling 71220128-0 is a 32" (81.3 cm) AFD bath and wall surround, compression molded from Vikrell® material. It features an above-floor-drain (AFD) rough-in, a durable high-gloss finish, and a tongue-and-groove 4-piece modular design for easy installation. The product comes with a 10-year consumer/3-year commercial limited warranty. It has a 2" (5.1 cm) wainscot/tile ledge and a 20" (50.8 cm) bath depth (floor to top of threshold). The rough-in dimensions are 60-1/4″ (153 cm) x 33-1/4″ (84.5 cm) x 77-1/4″ (196.2 cm), and the finished dimensions are 60

Sterling 71220128-0 is a 32" (81.3 cm) AFD bath and wall surround, compression molded from Vikrell® material. It features an above-floor-drain (AFD) rough-in, a durable high-gloss finish, and a tongue-and-groove 4-piece modular design for easy installation. The product comes with a 10-year consumer/3-year commercial limited warranty. It has a 2" (5.1 cm) wainscot/tile ledge and a 20" (50.8 cm) bath depth (floor to top of threshold). The rough-in dimensions are 60-1/4″ (153 cm) x 33-1/4″ (84.5 cm) x 77-1/4″ (196.2 cm), and the finished dimensions are 60

Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Above-floor-drain (AFD) rough-in
•
Durable high-gloss finish
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
10-year consumer/3-year commercial limited warranty
•
2″ (5.1 cm) wainscot/tile ledge
•
20″ (50.8 cm) bath depth (floor to top of threshold)
•
60-1/4″ (153 cm) x 33-1/4″ (84.5 cm) x 77-1/4″
(196.2 cm) rough-in dimensions include nailing flange
•
60″ (152.4 cm) x 32″ (81.3 cm) x 76″ (193 cm)
finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
CSA B45
32″ (81.3 cm) AFD BATH AND WALL
SURROUND
71120112
ALSO 71120122, 71220112, 71220122
71120110 71220110
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71120112 32″ (81.3 cm) AFD bath and wall surround, tile wall, left drain ❑ 0 ❑ Other_____
71120122 32″ (81.3 cm) AFD bath and wall surround, tile wall, right drain ❑ 0 ❑ Other_____
71220112 32″ (81.3 cm) AFD bath and wall surround, curve wall, left drain ❑ 0 ❑ Other_____
71220122 32″ (81.3 cm) AFD bath and wall surround, curve wall, right drain ❑ 0 ❑ Other_____
Model Age in Place Component Description Colors/Finishes
71220118 AFD complete unit with age in place backers, left drain ❑ 0 ❑ Other_____
71220128 AFD complete unit with age in place backers, right drain ❑ 0 ❑ Other_____
71121112 AFD bath only, left drain ❑ 0 ❑ Other_____
71121122 AFD bath only, right drain ❑ 0 ❑ Other_____
71120118 AFD complete unit with age in place backers, left drain ❑ 0 ❑ Other_____
71120128 AFD complete unit with age in place backers, right drain ❑ 0 ❑ Other_____
71121112 AFD bath only, left drain ❑ 0 ❑ Other_____
71121122 AFD bath only, right drain ❑ 0 ❑ Other_____
ENSEMBLETM
Page 1 of 2
1032206-4-
H
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 42″ (106.7 cm) x 20″ (50.8 cm)
Top area 54″ (137.2 cm) x 26″ (66 cm)
To overflow:
Water depth 13″ (33 cm)
Capacity 51 gal (193 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71120112
71120122
71220112
71220122
57-11/16″ (146.5 cm) 55-1/2″ (141 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
End stud positioning is critical if nailing-in flanges are to be
used.
Studs should be positioned roughly as shown.
2" (5.1 cm)
2" (5.1 cm)
3-1/2" (8.9 cm)
4" (10.2 cm)
30" (76.2 cm)
8" (20.3 cm)
16" (40.6 cm)
14" (35.6 cm)
6" (15.2 cm) (Typical)
2" (5.1 cm) D. Drain
2-7/8" (7.3 cm)
15-1/2"
(39.4 cm)
8-1/2"
(21.6 cm)
8-1/2"
(21.6 cm)
22-1/2"
(57.2 cm)
33-1/4"
(84.5 cm)
33-1/4"
(84.5 cm)
1-1/4"
(3.2 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
33-1/4"
(84.5 cm)
1-1/4" (3.2 cm)
54"
(137.2 cm)
77-1/4"
(196.2 cm)
60"
(152.4 cm)
20" (50.8 cm)
3" (7.6 cm) Drain
Bottom to Floor
23"
(58.4 cm)
22"
(55.9 cm)
54"
(137.2 cm)
77-1/4"
(196.2 cm)
60"
(152.4 cm)
20" (50.8 cm)
3" (7.6 cm) Drain
Bottom to Floor
23"
(58.4 cm)
22"
(55.9 cm)
Overflow Detail
Product Diagram
ENSEMBLETM
ENSEMBLETM 32″ (81.3 cm) AFD BATH AND WALL SURROUND
Page2of2
1032206-4-
H
  • Page 1 1
  • Page 2 2

Sterling 71220128-0 Dimensions Guide

Sterling
Brand
Sterling
Model
71220128-0
Type
Dimensions Guide
This manual is also suitable for

Sterling 71220128-0 is a 32" (81.3 cm) AFD bath and wall surround, compression molded from Vikrell® material. It features an above-floor-drain (AFD) rough-in, a durable high-gloss finish, and a tongue-and-groove 4-piece modular design for easy installation. The product comes with a 10-year consumer/3-year commercial limited warranty. It has a 2" (5.1 cm) wainscot/tile ledge and a 20" (50.8 cm) bath depth (floor to top of threshold). The rough-in dimensions are 60-1/4″ (153 cm) x 33-1/4″ (84.5 cm) x 77-1/4″ (196.2 cm), and the finished dimensions are 60

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents