Glaze 'N Seal 174 User guide

Brand
Glaze 'N Seal
Model
174
Type
User guide

This manual is also suitable for

Glaze 'N Seal 174 is a water-based sealer specifically formulated to give a "Wet Look" appearance to concrete, flagstone, brick, slate, exposed aggregate, pavers, and other porous tile & masonry surfaces. It is also non-flammable, breathable, and easy to apply.

Here are some of the key features and benefits of Glaze 'N Seal 174:

  • Deepens the color of the surface, giving it a "Wet Look" appearance
  • Meets all VOC regulations
  • Repels oil and grease stains
  • Non-flammable
  • Breathable
  • Easy to apply
  • Never yellows
  • Eligible for LEED points
  • Blush resistant
  • Re-coatable

Glaze 'N Seal 174 is ideal for use on driveways, patios, interior floors, and other concrete surfaces. It can also be used on natural stone and porous tile.

Glaze 'N Seal 174 is a water-based sealer specifically formulated to give a "Wet Look" appearance to concrete, flagstone, brick, slate, exposed aggregate, pavers, and other porous tile & masonry surfaces. It is also non-flammable, breathable, and easy to apply.

Here are some of the key features and benefits of Glaze 'N Seal 174:

  • Deepens the color of the surface, giving it a "Wet Look" appearance
  • Meets all VOC regulations
  • Repels oil and grease stains
  • Non-flammable
  • Breathable
  • Easy to apply
  • Never yellows
  • Eligible for LEED points
  • Blush resistant
  • Re-coatable

Glaze 'N Seal 174 is ideal for use on driveways, patios, interior floors, and other concrete surfaces. It can also be used on natural stone and porous tile.

“WET LOOK WB”
SEALER
FOR CONCRETE, MASONRY & NATURAL STONE
Do not shake container. Apply two or more coats of
sealer (do not allow it to puddle). Make sure each
coat is dry to the touch before applying second coat;
usually one to three hours. Allow additional drying
time in moist climates. Sealer can be applied with
brush, lamb’s wool applicator or spray equipment,
dependent on the porosity and texture of the sur-
face. Apply between 55º and 80ºF. Allow 72-hours
curing time against heavy moisture and bulk water.
Do not allow to freeze and avoid heavy usage for up
to 72-hours. Sealer will continue to gain strength for
up to one week.
Coverage: 100-400 sq. ft. per gallon dependent on
porosity of the surface.
Maintenance: Sweep and mop floor regularly.
For added abrasion and wear protection and to
extend the life of the sealer on interior floors, use
Glaze ’N Seal Floor Polish (high-gloss or matte) as a
traffic coat.
Packaging: Glaze ’N Seal “Wet Look” WB Sealer
is packaged in quarts, gallons, 5-gallon pails and
55-gallon drums.
SPECIFICATIONS
Base Aqueous Acrylic Copolymer
Tukon Hardness +6.0
Friction Level Excess 6.3
Glass Transition Point 34ºC
Density 8.58 lbs. per gallon
Refractive Index Approx. 1.4077
Solids Excess 16%
Appearance Milky White — Dries Clear
VOC Less than 100 grams per liter
Formulated specifically to protect and give a “Wet Look”
appearance to Concrete, Flagstone, Brick, Slate, Exposed
Aggregate, Pavers, and other Porous Tile & Masonry Surfaces.
Quality Products for Concrete, Tile and Masonry
Glaze ’N Seal Products, Irvine, CA • 800/486-1414
www.glaze-n-seal.com
FS 12-1/14
PRODUCT DESCRIPTION
Glaze ’N Seal “Wet Look WB” is an environmentally
superior low VOC water-based sealer. It is especially
formulated to give the surface that deepened, “Wet
Look” appearance. It may be used indoors or out-
doors and is extremely easy to apply and maintain.
“Wet Look” WB is a quick drying, non-yellowing for-
mula that protects against organic stains, including
cooking oil and grease.
USES
“Wet Look WB” protects and beautifies all concrete
and decorative concrete surfaces, exposed aggre-
gate, pavers, natural stone and porous tile. It is ideal
for driveways, patios and interior floors. For interior
application, use Glaze ’N Seal Acrylic Floor Polish for
an added durable abrasion resistance to foot traffic
and to extend the life of the sealer.
FEATURES
• Deepened “Wet Look” appearance • Easy to apply
• Meets all VOC regulations • Never yellows
• Repels oil and grease stains • Eligible for LEED points
• Non-ammable • Blush resistant
• Breathable. Cleans up with water • Re-coatable
PREPARATION
All surfaces must be free of efflorescence, dirt, oil,
wax, grease and defective paint or sealer. If acid has
been used, neutralize surface with a product like
Glaze ’N Seal Neutralizing Rinse and allow surface to
dry thoroughly before applying sealer. When water is
used or surface is wet from rain, allow surface to dry
72-hours before sealing.
APPLICATION
Important Note: Always Test a small area of the
surface to be sealed to verify penetration and
satisfaction of sealed appearance.
  • Page 1 1

Glaze 'N Seal 174 User guide

Brand
Glaze 'N Seal
Model
174
Type
User guide
This manual is also suitable for

Glaze 'N Seal 174 is a water-based sealer specifically formulated to give a "Wet Look" appearance to concrete, flagstone, brick, slate, exposed aggregate, pavers, and other porous tile & masonry surfaces. It is also non-flammable, breathable, and easy to apply.

Here are some of the key features and benefits of Glaze 'N Seal 174:

  • Deepens the color of the surface, giving it a "Wet Look" appearance
  • Meets all VOC regulations
  • Repels oil and grease stains
  • Non-flammable
  • Breathable
  • Easy to apply
  • Never yellows
  • Eligible for LEED points
  • Blush resistant
  • Re-coatable

Glaze 'N Seal 174 is ideal for use on driveways, patios, interior floors, and other concrete surfaces. It can also be used on natural stone and porous tile.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents