Kelleher R662 Installation guide

USES FOR WIRE MOULD

Wire moulding is commonly used in single wall construction homes. When

wiring cannot be hidden by running it through the interior of a wall (between

drywall), it has to be run on the outside of the wall or ceiling. Wire moulding

is used to cover those wires and give a decorative finish.

Wire moulding comes in different sizes, depending on how many wires are

being covered, and it is mainly used on the interior of a home.

It can be stained or primed and painted depending on the type of wire

moulding you are using.

This manual is also suitable for

Download PDF